CentOS 5.0 x86 64 auf STRATO HighQ-Server SR4 im RAID 1

Remote loggin:
hxxxxxxx.console.stratoserver.net
Username: xxxx
Password: xxxx

push Enter and login as root.

Download Installationsimage from isolinux-directory to /boot-directory:

cd /boot
wget -O centos-initrd.img http://ftp.halifax.rwth-aachen.de/centos/5.0/os/x86_64/images/pxeboot/i ...
wget -O centos-vmlinuz http://ftp.halifax.rwth-aachen.de/centos/5.0/os/x86_64/images/pxeboot/v ...

grub.conf configuration:
nano /boot/grub/grub.conf

"#" grub.conf generated by anaconda
"#"
"#" Note that you do not have to rerun grub after making changes to this file
"#" NOTICE: You have a /boot partition. This means that
"#" all kernel and initrd paths are relative to /boot/, eg.
"#" root (hd0,0)
"#" kernel /vmlinuz-version ro root=/dev/hda3
"#" initrd /initrd-version.img
"#" boot=/dev/hda
serial --unit=0 --speed=57600
terminal serial

default=0
timeout=10
#splashimage=(hd0,0)/grub/splash.xpm.gz
#hiddenmenu
title Fedora Core (2.6.22.9-61.fc6)
root (hd0,0)
kernel /vmlinuz-2.6.22.9-61.fc6 ro root=LABEL=/ console=tty0 console=tt$
initrd /initrd-2.6.22.9-61.fc6.img
title Fedora Core (Disk 1)
root (hd0,0)
kernel /vmlinuz ro root=LABEL=/ console=tty0 console=ttyS0,57600
initrd /initrd
title Fedora Core (Disk 2)
root (hd1,0)
kernel /vmlinuz ro root=LABEL=/ console=tty0 console=ttyS0,57600
initrd /initrd
"#" merge
title CentOS-5 x86_64 (Disk 1)
root (hd0,0)
kernel /centos-vmlinuz console=tty0 console=ttyS0,57600 headless
ip= myIP netmask=255.255.255.0 gateway=85.214.64.1 ksdevice=eth0
dns=ns.servcompetenz.de hostname=myHost.stratoserver.net
method=http://wftp.tu-chemnitz.de/pub/linux/centos/5.0/os/x86_64/
lang=de_DE keymap=de
initrd /centos-initrd.img
title CentOS-5 x86_64 (Disk 2)
root (hd1,0)
kernel /centos-vmlinuz console=tty0 console=ttyS0,57600 headless
ip=myIP netmask=255.255.255.0 gateway=85.214.64.1 ksdevice=eth0
dns=ns.servcompetenz.de hostname=myHost.stratoserver.net
method=http://wftp.tu-chemnitz.de/pub/linux/centos/5.0/os/x86_64/
lang=de_DE keymap=de
initrd /centos-initrd.img

+ + + + + + + + + + + + + + + + + + + + + + + + + + + +

After save the config:
reboot


Answer:

+---------+ Choose a Language +---------+

What language would you like to use
during the installation process?


Catalan ^
Chinese(Simplified) :
Chinese(Traditional) #
Croatian :
Czech :
Danish :
Dutch :
English v

+------+ Installation Method +------+

What type of media contains the
packages to be installed? |

Local CDROM
Hard drive
NFS image
FTP
HTTP *

+----------------+ Configure TCP/IP +----------------+

[*] Enable IPv4 support
( ) Dynamic IP configuration (DHCP)
(*) Manual configuration

[ ] Enable IPv6 support
(*) Automatic neighbor discovery (RFC 2461)
( ) Dynamic IP configuration (DHCP)
( ) Manual configuration

+----------------+ Manual TCP/IP Configuration +-----------------+

Enter the IPv4 and/or the IPv6 address and prefix
(address / prefix). For IPv4, the dotted-quad netmask
or the CIDR-style prefix are acceptable. The gateway and
name server fields must be valid IPv4 or IPv6 addresses. |

IPv4 address: myIP / 255.255.255.0
Gateway: 85.214.64.1
Name Server: 81.169.163.106

+-----------------+ HTTP Setup +------------------+

Please enter the following information:

o the name or IP number of your Web server
o the directory on that server containing

CentOS for your architecture |

Web site name: wftp.tu-chemnitz.de
CentOS directory: pub/linux/centos/5.0/os/x86_64

+----------------+ Error +-----------------+

Unable to retrieve

http://wftp.tu-chemnitz.de//pub/linux/centos/5.0/os/x86_64/images/minst ....

Seltsam ist der doppel Slashzischen .de and pub?

Vielleicht hat jemand einen Hinweis die Install. zum Erfolg zu führen.


Thank you for your help

TheCast