builder4242
Goto Top

Cisco 1812 routet nicht alle IP-Adressen im Internet

Hallo,


Ich soll bei uns einen Cisco 1812 installieren, was mir größtenteils schon gelungen ist.

Nun habe ich aber noch folgende Probleme:


1. Problem

Ich habe DSL 16000 von T-Systems mit fester IP-Adresse,
die Name-Server meines Anschlusses habe ich manuell in die Config eingetragen,
er löst auch alle Domains auf, dennoch kann ich nicht alle Adressen anpingen.
z.B. microsoft.com, daimler.com
Das sind die 2 Adressen bei denen es mir bis jetzt aufgefallen ist, ich kann sie natürlich auch
nicht über den Browser erreichen.


2. Problem:

Wir haben einen Linux Server auf dem Openswan läuft,
und ich habe dazu auch die beiden (selbst kompilierten Ports geöffnet):

ip nat inside source static udp 10.10.1.250 15015 interface Dialer1 15015
ip nat inside source static udp 10.10.1.250 15016 interface Dialer1 15016

Die beiden Gegenstellen bestätigen die Verbindung, es ist jedoch nicht möglich einen Ping durchzuführen,

könnten diese Probleme etwas miteinander zu tun haben?


Danke schon mal im voraus,

Content-Key: 128621

Url: https://administrator.de/contentid/128621

Printed on: April 24, 2024 at 15:04 o'clock

Member: SlainteMhath
SlainteMhath Nov 04, 2009 at 12:09:37 (UTC)
Goto Top
Moin,
1. Problem
z.B. microsoft.com, daimler.com
Was sagt den ein tracert vom Client aus?

lg,
Slainte
Member: builder4242
builder4242 Nov 04, 2009 at 12:16:14 (UTC)
Goto Top
trace microsoft.com

Translating "microsoft.com"...domain server (217.0.41.81) [OK]

Type escape sequence to abort.
Tracing the route to microsoft.com (207.46.197.32)

  1 217.5.98.11 20 msec 20 msec 20 msec
  2 217.237.152.98 20 msec 20 msec 24 msec
  3 l-eb2-i.L.DE.NET.DTAG.DE (62.154.89.130) 20 msec 20 msec 20 msec
  4 217.243.216.202 32 msec 32 msec 32 msec
  5 vlan99.csw4.Frankfurt1.Level3.net (4.68.23.254) 40 msec
    vlan79.csw2.Frankfurt1.Level3.net (4.68.23.126) 44 msec 40 msec
  6 ae-92-92.ebr2.Frankfurt1.Level3.net (4.69.140.29) 32 msec 32 msec
    ae-82-82.ebr2.Frankfurt1.Level3.net (4.69.140.25) 40 msec
  7 ae-42-42.ebr2.Washington1.Level3.net (4.69.137.54) 204 msec
    ae-43-43.ebr2.Washington1.Level3.net (4.69.137.58) 196 msec
    ae-42-42.ebr2.Washington1.Level3.net (4.69.137.54) 204 msec
  8 ae-72-72.csw2.Washington1.Level3.net (4.69.134.150) 188 msec
    ae-62-62.csw1.Washington1.Level3.net (4.69.134.146) 192 msec 188 msec
  9 ae-21-69.car1.Washington3.Level3.net (4.68.17.7) 192 msec
    ae-31-99.car1.Washington3.Level3.net (4.68.17.199) 192 msec 256 msec
 10 MICROSOFT-C.car1.Washington3.Level3.net (4.71.204.14) 132 msec 152 msec 120                                                            msec
 11 209.240.199.99 120 msec 116 msec 120 msec
 12 ge-6-1-0-0.bl2-64c-1b.ntwk.msn.net (207.46.43.27) [MPLS: Label 350978 Exp 0]                                                            120 msec 120 msec 120 msec
 13 ge-3-1-0-0.co2-64c-1a.ntwk.msn.net (207.46.43.101) [MPLS: Label 340801 Exp 0                                                           ] 200 msec 200 msec 200 msec
 14 ge-0-1-0-0.wst-64cb-1a.ntwk.msn.net (207.46.43.195) [MPLS: Label 721136 Exp                                                            0] 196 msec 200 msec 196 msec
 15 ge-7-1-0-0.cpk-64c-1b.ntwk.msn.net (207.46.43.228) 200 msec 196 msec 200 mse                                                           c
 16 ten2-4.cpk-76c-1b.ntwk.msn.net (207.46.47.195) 200 msec 200 msec 200 msec
 17 10.22.0.22 200 msec 196 msec 200 msec
 18  *  *  *
 19  *  *  *
 20  *  *  *
 21  *  *  *
 22  *  *  *
 23  *  *  *
 24  *  *  *
Member: SlainteMhath
SlainteMhath Nov 04, 2009 at 12:26:55 (UTC)
Goto Top
Gut, vom router aus funktioniert... und jetzt nochmal nen tracert von einem client aus.
Member: builder4242
builder4242 Nov 04, 2009 at 13:00:39 (UTC)
Goto Top
aber er ist vom Router aus auch nicht ganz durchgelaufen?

traceroute: Warning: microsoft.com has multiple addresses; using 207.46.197.32
traceroute to microsoft.com (207.46.197.32), 30 hops max, 38 byte packets
 1  rtss (10.10.2.2)  0.348 ms  0.319 ms  0.292 ms
 2  217.5.98.11 (217.5.98.11)  21.410 ms  22.155 ms  21.247 ms
 3  217.237.152.98 (217.237.152.98)  21.854 ms  21.546 ms  20.912 ms
 4  l-eb2-i.l.de.net.dtag.de (62.154.89.130)  21.406 ms  21.000 ms  21.409 ms
 5  217.243.216.202 (217.243.216.202)  32.541 ms  32.835 ms  32.991 ms
 6  vlan99.csw4.frankfurt1.level3.net (4.68.23.254)  35.937 ms vlan69.csw1.Frankfurt1.Level3.net (4.68.23.62)  41.118 ms vlan99.csw4.frankfurt1.level3.net (4.68.23.254)  33.582 ms
 7  ae-72-72.ebr2.frankfurt1.level3.net (4.69.140.21)  33.083 ms  33.231 ms  34.041 ms
 8  ae-43-43.ebr2.washington1.level3.net (4.69.137.58)  202.272 ms  198.270 ms  200.775 ms
 9  ae-82-82.csw3.Washington1.Level3.net (4.69.134.154)  188.744 ms ae-62-62.csw1.washington1.level3.net (4.69.134.146)  199.764 ms ae-92-92.csw4.washington1.level3.net (4.69.134.158)  187.937 ms
10  ae-41-89.car1.washington3.level3.net (4.68.17.135)  316.882 ms ae-31-99.car1.washington3.level3.net (4.68.17.199)  216.193 ms  381.528 ms
11  microsoft-c.car1.washington3.level3.net (4.71.204.14)  121.549 ms  122.091 ms  120.451 ms
12  209.240.199.99 (209.240.199.99)  121.700 ms  119.796 ms  120.951 ms
13  ge-6-1-0-0.bl2-64c-1b.ntwk.msn.net (207.46.43.27)  121.249 ms  134.170 ms  121.251 ms
14  ge-3-1-0-0.co2-64c-1a.ntwk.msn.net (207.46.43.101)  201.026 ms  199.567 ms  199.028 ms
15  ge-0-1-0-0.wst-64cb-1a.ntwk.msn.net (207.46.43.195)  198.827 ms  198.819 ms  199.828 ms
16  ge-7-1-0-0.cpk-64c-1b.ntwk.msn.net (207.46.43.228)  197.826 ms  198.519 ms  198.280 ms
17  ten2-4.cpk-76c-1b.ntwk.msn.net (207.46.47.195)  198.328 ms  199.069 ms  199.029 ms
18  10.22.0.22 (10.22.0.22)  197.876 ms  197.871 ms  199.727 ms
19  * * *
20  * * *
21  * *
Member: SlainteMhath
SlainteMhath Nov 04, 2009 at 13:26:03 (UTC)
Goto Top
aber er ist vom Router aus auch nicht ganz durchgelaufen?
Stimmt, aber da wird wohl ne Firewall hinter "10.22.0.22" hängen die ICMP nicht durchlässt.

Worums mir eigentlich ging, war zu sehen, ob der Router ueberhaupt weis was er mit den Pakten aus dem LAN anfangen soll face-smile Mein Trace sieht uebrigens genau so aus.

Warum du die Websites nicht ansurfen kannst, kann ich Dir allerdings auch nicht sagen, sorry.
Member: builder4242
builder4242 Nov 08, 2009 at 16:49:13 (UTC)
Goto Top
Das mit dem Openswan habe ich jetzt hinbekommen, (lag am Server).

Allerdings kann ich bestimmte Webseiten ( z.B. microsoft.com ) immer noch nicht erreichen?
Member: aqui
aqui Nov 10, 2009, updated at Oct 18, 2012 at 16:39:54 (UTC)
Goto Top
Achtung das ist mal wieder ein Doppelpost zu:

Cisco DSL Config, was ist hier faul?

Bitte dann den Ursprungsthread hier schliessen oder einen Hinweis schreiben
How can I mark a post as solved?
wenn man schon mit solchen unfeundlichen Doppelpostings die Forumsteilnehmer hier belastet face-sad