jmc
Goto Top

CISCO PIX 515 PIX Version 6.3(3) PDM Version 3.0(1)

Zugriff auf Device Manager

Hallo,

ich habe ein Problem beim Zugriff auf den Device Manager, soweit geht alles nur kann ich mir die Konfiguration nicht anzeigen lassen und bekomme immer anhängenden Fehler. Vielleicht kennt jemand den Fehler und kann mir sagen woran es liegt.

6b05cb1f62b32a2e241b55ddb756f422-pdm

Vielen Dank

Content-Key: 104612

Url: https://administrator.de/contentid/104612

Ausgedruckt am: 28.03.2024 um 20:03 Uhr

Mitglied: Rafiki
Rafiki 22.12.2008 um 16:06:45 Uhr
Goto Top
PDM does not support configurations which use both ACL and Conduit/outbound for access control.


So weit ich diese Fehlermeldung interpretiere hast du eine ACL definiert und zusätzlich eine Outbound Regel. Der PDM kann nicht damit umgehen wenn beides in deiner Konfig auftaucht. Such mal nach einer Zeile wie:
Outbound 30 permit 0.0.0.0 0.0.0.0 tcp 0
und überlege dir ob das Sinn macht oder was zuletzt geändert wurde.
Mitglied: jmc
jmc 23.12.2008 um 07:32:18 Uhr
Goto Top
Hallo Rafiki,

danke für die Info, leider kann ich keinen derartigen Eintrag finden, hier mal die Konfig:

Saved
Written by enable_15 at 09:20:48.765 UTC Mon Dec 22 2008


PIX Version 6.3(3)
interface ethernet0 10baset
interface ethernet1 auto
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password xXxXxXxXx encrypted
passwd xXxXxXxXx encrypted
hostname firewall
domain-name xXxXxXxXx
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
access-list xXxXxXxXx permit ip 192.168.10.0 255.255.255.0 172.16.0.0 255.255.0.0
access-list xXxXxXxXx permit ip 192.168.20.0 255.255.255.0 172.16.0.0 255.255.0.0
access-list nonat permit ip any 192.168.199.0 255.255.255.0
access-list nonat permit ip 192.168.20.0 255.255.255.0 xXxXxXxXx 255.255.0.0
access-list nonat permit ip 192.168.10.0 255.255.255.0 xXxXxXxXx 255.255.0.0
access-list nonat permit ip 192.168.10.0 255.255.255.0 xXxXxXxXx 255.255.248.0
access-list nonat permit ip 192.168.20.0 255.255.255.0 xXxXxXxXx 255.255.248.0
access-list nonat permit ip 192.168.10.0 255.255.255.0 xXxXxXxXx 255.255.255.0
access-list acl_outside permit icmp any any echo
access-list acl_outside permit icmp any any echo-reply
access-list acl_outside permit icmp any any unreachable
access-list acl_outside permit icmp any any time-exceeded
access-list acl_outside permit icmp any any parameter-problem
access-list acl_outside permit udp host xXxXxXxXx host xXxXxXxXx eq 1433
access-list acl_outside permit tcp host xXxXxXxXx host xXxXxXxXx eq 1433
access-list xXxXxXxXx permit ip 192.168.10.0 255.255.255.0 10.173.144.0 255.255.248.0
access-list xXxXxXxXx permit ip 192.168.20.0 255.255.255.0 10.173.144.0 255.255.248.0
access-list xXxXxXxXx permit ip 192.168.10.0 255.255.255.0 192.168.22.0 255.255.255.0
pager lines 24
logging on
logging timestamp
logging console debugging
logging monitor warnings
logging buffered debugging
mtu outside 1500
mtu inside 1500
ip address outside xXxXxXxXx 255.255.255.248
ip address inside 192.168.10.2 255.255.255.0
ip verify reverse-path interface outside
ip audit info action alarm
ip audit attack action alarm
ip local pool vpnclients xXxXxXxXx
pdm location xXxXxXxXx 255.255.0.0 inside
pdm location xXxXxXxXx 255.255.255.0 inside
pdm location xXxXxXxXx 255.255.255.0 inside
pdm location xXxXxXxXx 255.255.0.0 outside
pdm location xXxXxXxXx 255.255.255.0 outside
pdm location xXxXxXxXx 255.255.248.0 outside
pdm location xXxXxXxXx 255.255.240.0 outside
pdm logging debugging 200
pdm history enable
arp timeout 14400
global (outside) 1 xXxXxXxXx
nat (inside) 0 access-list nonat
nat (inside) 1 192.168.10.0 255.255.255.0 0 0
nat (inside) 1 192.168.20.0 255.255.255.0 0 0
static (inside,outside) xXxXxXxXx 192.168.10.8 netmask 255.255.255.255 0 0
access-group acl_outside in interface outside
conduit permit icmp any any
route outside 0.0.0.0 0.0.0.0 xXxXxXxXx
route inside 192.168.20.0 255.255.255.0 192.168.10.5 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol local
aaa authentication ssh console LOCAL
http server enable
http xXxXxXxXx 255.255.240.0 outside
http xXxXxXxXx 255.255.0.0 inside
http xXxXxXxXx 255.255.255.0 inside
http xXxXxXxXx 255.255.255.255 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
sysopt connection permit-ipsec
crypto ipsec transform-set standard esp-des esp-md5-hmac
crypto ipsec transform-set high-encryption esp-3des esp-md5-hmac
crypto ipsec security-association lifetime seconds 3600
crypto dynamic-map vpn-client 4 set transform-set standard
crypto map xXxXxXxXx 10 ipsec-isakmp
crypto map xXxXxXxXx 10 match address heidelberg
crypto map xXxXxXxXx 10 set pfs group2
crypto map xXxXxXxXx 10 set peer xXxXxXxXx
crypto map xXxXxXxXx 10 set transform-set high-encryption standard
crypto map xXxXxXxXx 20 ipsec-isakmp
crypto map xXxXxXxXx 20 match address xXxXxXxXx
crypto map xXxXxXxXx 20 set pfs group2
crypto map xXxXxXxXx 20 set peer xXxXxXxXx
crypto map xXxXxXxXx 20 set transform-set high-encryption standard
crypto map xXxXxXxXx 30 ipsec-isakmp
crypto map xXxXxXxXx 30 match address lehrte-oldenburg
crypto map xXxXxXxXx 30 set pfs group2
crypto map xXxXxXxXx 30 set peer xXxXxXxXx
crypto map xXxXxXxXx 30 set transform-set high-encryption standard
crypto map xXxXxXxXx 100 ipsec-isakmp dynamic vpn-client
crypto map xXxXxXxXx interface outside
isakmp enable outside
isakmp key xXxXxXxXx address xXxXxXxXx netmask 255.255.255.255 no-xauth no-config-mode
isakmp key xXxXxXxXx address xXxXxXxXx netmask 255.255.255.255 no-xauth no-config-mode
isakmp key xXxXxXx address xXxXxXx netmask 255.255.255.255 no-xauth no-config-mode
isakmp identity address
isakmp client configuration address-pool local vpnclients outside
isakmp nat-traversal 20
isakmp policy 50 authentication pre-share
isakmp policy 50 encryption 3des
isakmp policy 50 hash md5
isakmp policy 50 group 2
isakmp policy 50 lifetime 43200
isakmp policy 100 authentication pre-share
isakmp policy 100 encryption des
isakmp policy 100 hash md5
isakmp policy 100 group 2
isakmp policy 100 lifetime 43200
vpngroup vpnuser address-pool vpnclients
vpngroup vpnuser idle-time 1800
vpngroup vpnuser password xXxXxXxXx
telnet 192.168.10.0 255.255.255.0 inside
telnet timeout 15
ssh xXxXxXxXx 255.255.248.0 outside
ssh xXxXxXxXx 255.255.240.0 outside
ssh xXxXxXxXx 255.255.255.240 outside
ssh xXxXxXxXx 255.255.0.0 inside
ssh xXxXxXxXx 255.255.255.0 inside
ssh xXxXxXxXx 255.255.255.0 inside
ssh timeout 60
management-access inside
console timeout 0
username xXxXxXxXx password xXxXxXxXx encrypted privilege 15
username xXxXxXxXx password xXxXxXxXx encrypted privilege 15
username xXxXxXxXx password xXxXxXxXx encrypted privilege 15
terminal width 80
Cryptochecksum:7492611fcda5e67230207b42d371207b
: end


Vielleicht fällt Dir dazu was ein.

VG
Mitglied: Rafiki
Rafiki 23.12.2008 um 10:33:07 Uhr
Goto Top
In deiner Config steht:
access-group acl_outside in interface outside
conduit permit icmp any any

Wenn du den PDM verwenden möchtest musst du dich entscheiden, entweder ACL oder Counduit (durchleiten)

Im Cisco Handbuch steht dazu:
http://www.cisco.com/en/US/docs/security/pix/pix63/command/reference/cm ...

conduit
Add, delete, or show conduits through the PIX Firewall for incoming connections. However, the conduit command has been superseded by the access-list command. We recommend that you migrate your configuration away from the conduit command to maintain future compatibility.