mexx
Goto Top

Knoppix bootet, Suse nicht - warum?

Hallo,

ich habe einen alten PC mit DVD-Laufwerk. Wenn ich Knoppix bootet will funktioniert alles super. Aber mit einer Suse DVD wird das nix. Der Rechner denkt nicht mal annähernd daran von DVD zu booten. Die DVD ist vollkommen ok. Habt Ihr eine Idee warum sich der PC weigert?

bye

Content-Key: 18304

Url: https://administrator.de/contentid/18304

Ausgedruckt am: 28.03.2024 um 19:03 Uhr

Mitglied: sysad
sysad 24.10.2005 um 11:16:48 Uhr
Goto Top
Hallo,

ich habe einen alten PC mit DVD-Laufwerk.
Wenn ich Knoppix bootet will funktioniert
alles super. Aber mit einer Suse DVD wird
das nix. Der Rechner denkt nicht mal
annähernd daran von DVD zu booten. Die
DVD ist vollkommen ok. Habt Ihr eine Idee
warum sich der PC weigert?

bye

Vielleicht liegt es am 'alten PC'. Ist Knoppix auf CD oder auch auf DVD?
Läuft das LW an bei der SuSE DVD?
Kann die SuSE auf einem andern PC booten?
Mitglied: mexx
mexx 24.10.2005 um 11:44:26 Uhr
Goto Top
Knoppix ist ein CD. Das LW ist nicht angelaufen. Habe jetzt Platte und DVD-LW in einen anderen Rechner eingebaut und installiere darauf das Samba. Wenn ich es dann wieder in das alte gehäuse einsetz, müsste es doch funzen. Habe nur ein wenig bedenken, weil es ja dann andere Komponenten sind. Mainboard und Karten. Windows macht da mucken.
Mitglied: sysad
sysad 24.10.2005 um 12:27:57 Uhr
Goto Top
Dann kann es sein, dass Du nur von CD booten kannst und nicht von DVD.

W wird mucken, aber die hast 3 Tage Zeit zum Aktivieren, vorher Aktivvierungsdatenbank (WPA.DBL) sichern.
Mitglied: geTuemII
geTuemII 24.10.2005 um 13:49:35 Uhr
Goto Top
Hallo Mexx,

keine Sorge, Linux ist in Sachen Hardware recht flexibel. Ich habe mal eine Platte aus einem alten Pentiumrechner in einen P4 eingebaut, ging problemlos face-smile

Viel Erfolg bei der SambaConfig, geTuemII
Mitglied: mexx
mexx 24.10.2005 um 13:59:44 Uhr
Goto Top
Musste mich komplett umstellen. Leider habe ich nur begrenzte Möglichkeiten. Somit habe ich ein 266Mhz-Rechner mit 256MB und 3giga-Platte. Aber das System wird ja wohl unter Linux rocken.
Mitglied: geTuemII
geTuemII 24.10.2005 um 14:37:40 Uhr
Goto Top
Wenn die Kiste nur samba machen soll, klemme ihm die graphische Oberfläche ab. smb.conf kannst Du auch so editieren (vi), aber die Graphic frisst Ressourcen.

geTuemII
Mitglied: mexx
mexx 24.10.2005 um 16:25:15 Uhr
Goto Top
Wo wir gerade von Grafik reden. Ich habe nach der INstallation einen gewaltigen Grafikfehler. Jeder menge vertikale und horizontale Striche. Versuche mal die Auflösung zuändern, aber waum war das dann nicht bei der INstallation und Konfiguration über Yast?
Mitglied: mexx
mexx 24.10.2005 um 16:44:06 Uhr
Goto Top
HILFE...ich werde schon ganz verrückt. Habe unter Yast in der Konsole die Auflösung geändert, aber es zeigt keine wirkung. Ich glaube, dass es auch nicht übernommen wurde.
Mitglied: duddits
duddits 25.10.2005 um 07:30:03 Uhr
Goto Top
Hi,

schau dir mal die Datei /etc/X11/XF86Config an.
Falls diese Datei nicht gibt öffne die gleichwertige Datei :
/etc/X11/xorg.conf
Nun schaust du dir den Screen Abschnitt an. Was steht dort ?
Außerdem würde ich solange du das Problem noch besitzt erstmal im Runlevel 3 arbeiten.
Konsole reicht doch.
PS. dort kannst auch Auflösung manuell ändern.

Gruß duddits
Mitglied: mexx
mexx 25.10.2005 um 08:05:19 Uhr
Goto Top
Nun, mir werden die verschiedenen Modi aufgeliestet und die Grafikkarte. Sieht aber alles OK aus. Ist nur ne Menge Zeug. Wie könnte ich die Datei per Netzwerk über die Konsole kopieren um sie zu posten?
Mitglied: duddits
duddits 25.10.2005 um 08:11:38 Uhr
Goto Top
Hi,

hast du schon Samba laufen. Wenn nicht probier scp oder direkt ssh wenn du sshd laufen hast. Musst du aber noch in der Firewall zulassen das du daruf zugreifen darfst.
Oder speicher es auf Disktte. Wenn deine anderen Rechner Windows PCs sind musst du diese aber mit Fat formatieren.

Gruß duddits
Mitglied: mexx
mexx 25.10.2005 um 08:15:20 Uhr
Goto Top
Samba habe ich noch nicht laufen. Kurz nach der Installation kam es zu den Grafikproblemen. Firwall ist zunächst komplett aus. Das wichtigste ist zunächst den Grafikfehler zu beseitigen. Selbst niedrigere Auflösung bringt nix.
Mitglied: duddits
duddits 25.10.2005 um 08:45:29 Uhr
Goto Top
Hi,

Stelle erstmal ein das du in der konsole startes dazu öffnes du mit einem Editor die Datei /etc/inittab und Stellst bei id:5:initdefault den Wert auf 3. Nun solltest du in der konsole erstmal ohne Grafikfehler arbeiten können, nach dem du neu gestartes hast. Danach kopierst die Datei /etc/X11/xorg.conf auf ein beliebiges Medium und kannst die nun posten.
Hast de eigentlich schon probiert den Grafiktreiber für deine Karte zu installieren ?

Gruß duddits
Mitglied: mexx
mexx 25.10.2005 um 09:00:23 Uhr
Goto Top
Ich arbeite bereits die gesamte Zeit in der Konsole. Wenn ich unter Yast die Auflösung oder den Grafiktreiber ändern will, startet es SaX2. Jedoch ist Sax2 eine X Window darstellung. Ergo: ich kann zwar Einstellungen ändern, aber ich sehe garnicht richtig, was ich ändere. Die Konsole war von Anfang an ohne Fehler.

Kann doch aber nicht sein, dass ich die gesamten Paket für den X Server rausschmeis und neu installiere. Wir sind ja nicht bei Windows!!! face-wink
Mitglied: mexx
mexx 25.10.2005 um 09:01:59 Uhr
Goto Top
Ich richte jetzt erstmal den Samba ein, um einige LOG-Files posten zu können. Aber das nur am Rand.
Mitglied: geTuemII
geTuemII 25.10.2005 um 09:02:03 Uhr
Goto Top
Hallo Mexx,

bevor wir hier weiter orakeln: Was ist denn das genau für eine Grafika?

geTuemII
Mitglied: mexx
mexx 25.10.2005 um 09:05:28 Uhr
Goto Top
S3 Virge/DX -> wurde auch vom System korrekt erkannt.
Mitglied: duddits
duddits 25.10.2005 um 09:17:36 Uhr
Goto Top
Hi,

was ist das für eine Grafikkarte ? Gefroce, ATI/Radion oder Matrox ?
Probier vom Hersteller den Treiber zu installieren. Kenn diese Grafikkarte gar nicht.

Gruß duddits
Mitglied: mexx
mexx 25.10.2005 um 09:33:16 Uhr
Goto Top
Jetzt wird mich der Admin umbringen: Hier die Log-File des XFree-Servers


X Window System Version 6.8.1
Release Date: 17 September 2004
X Protocol Version 11, Revision 0, Release 6.8.1
Build Operating System: SuSE Linux [ELF] SuSE
Current Operating System: Linux SambaFile 2.6.8-24-default #1 Wed Oct 6 09:16:23 UTC 2004 i586
Build Date: 20 October 2004
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, () from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Oct 25 11:19:12 2005
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout[all]"
(
) |-->Screen "Screen" (0)
() | |-->Monitor "Monitor"
(
) | |-->Device "Device"
() |-->Input Device "Keyboard"
(
) |-->Input Device "Mouse[1]"
(WW) The directory "/usr/X11R6/lib/X11/fonts/100dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/Speedo" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/PEX" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/cyrillic" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/latin2/misc" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/latin2/75dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/latin2/100dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/latin2/Type1" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/latin7/75dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/baekmuk" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/japanese" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/kwintv" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/ucs/misc" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/ucs/75dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/ucs/100dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/hellas/misc" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/hellas/75dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/hellas/100dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/hellas/Type1" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/misc/sgi" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/xtest" does not exist.
Entry deleted from font path.
() FontPath set to "/usr/X11R6/lib/X11/fonts/misc:unscaled,/usr/X11R6/lib/X11/fonts/local,/usr/X11R6/lib/X11/fonts/75dpi:unscaled,/usr/X11R6/lib/X11/fonts/Type1,/usr/X11R6/lib/X11/fonts/URW,/usr/X11R6/lib/X11/fonts/truetype,/usr/X11R6/lib/X11/fonts/uni:unscaled,/usr/X11R6/lib/X11/fonts/CID,/opt/kde3/share/fonts"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(
) Input device list set to "/dev/ttyS0,/dev/ttyS1,/dev/ttyS2,/dev/ttyS3,/dev/ttyS4,/dev/ttyS5,/dev/ttyS6,/dev/ttyS7,/dev/ttyS8,/dev/psaux,/dev/logibm,/dev/sunmouse,/dev/atibm,/dev/amigamouse,/dev/atarimouse,/dev/inportbm,/dev/gpmdata,/dev/mouse,/dev/usbmouse,/dev/adbmouse,/dev/input/mice,/dev/input/event0,/dev/pointer0,/dev/pointer1,/dev/pointer2,/dev/pointer3"
(==) ModulePath set to "/usr/X11R6/lib/modules"
() Option "AllowMouseOpenFail"
(II) Open APM successful
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.7
X.Org XInput driver : 0.4
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(++) using VT number 7

(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x80000058, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,7100 card 0000,0000 rev 01 class 06,00,00 hdr 00
(II) PCI: 00:07:0: chip 8086,7110 card 0000,0000 rev 01 class 06,01,00 hdr 80
(II) PCI: 00:07:1: chip 8086,7111 card 0000,0000 rev 01 class 01,01,80 hdr 00
(II) PCI: 00:07:2: chip 8086,7112 card 0000,0000 rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:07:3: chip 8086,7113 card 0000,0000 rev 01 class 06,80,00 hdr 00
(II) PCI: 00:0a:0: chip 5333,8a01 card 5333,8a01 rev 01 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,0), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
-1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
-1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
-1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(0:10:0) S3 Inc. ViRGE/DX or /GX rev 1, Mem @ 0xe0000000/26
(II) Addressable bus resource ranges are
-1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
-1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
-1 0 0xe0000000 - 0xe3ffffff (0x4000000) MX[B](B)
[1] -1 0 0x00006400 - 0x0000641f (0x20) IX[B]
[2] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
(II) Active PCI resource ranges after removing overlaps:
-1 0 0xe0000000 - 0xe3ffffff (0x4000000) MX[B](B)
[1] -1 0 0x00006400 - 0x0000641f (0x20) IX[B]
[2] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
-1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
-1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xe0000000 - 0xe3ffffff (0x4000000) MX[B](B)
[6] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[7] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[8] -1 0 0x00006400 - 0x0000641f (0x20) IX[B]
[9] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 6.8.1, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "v4l"
(II) Loading /usr/X11R6/lib/modules/drivers/linux/v4l_drv.o
(II) Module v4l: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 0.0.1
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "s3virge"
(II) Loading /usr/X11R6/lib/modules/drivers/s3virge_drv.o
(II) Module s3virge: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 1.8.6
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "kbd"
(II) Loading /usr/X11R6/lib/modules/input/kbd_drv.o
(II) Module kbd: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) v4l driver for Video4Linux
(II) S3VIRGE: driver (version 1.8.6) for S3 ViRGE chipsets: virge, 86C325,
virge vx, 86C988, virge dx, virge gx, 86C375, 86C385, virge gx2,
86C357, virge mx, 86C260, virge mx+, 86C280, trio 3d, 86C365,
trio 3d/2x, 86C362, 86C368
(II) Primary Device is: PCI 00:0a:0
(--) Chipset virge dx found
(II) resource ranges after xf86ClaimFixedResources() call:
-1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xe0000000 - 0xe3ffffff (0x4000000) MX[B](B)
[6] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[7] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[8] -1 0 0x00006400 - 0x0000641f (0x20) IX[B]
[9] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
(II) resource ranges after probing:
-1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xe0000000 - 0xe3ffffff (0x4000000) MX[B](B)
[6] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[7] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[8] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[9] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[10] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[11] -1 0 0x00006400 - 0x0000641f (0x20) IX[B]
[12] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[13] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[14] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(
) S3VIRGE(0): Depth 16, (--) framebuffer bpp 16
(==) S3VIRGE(0): RGB weight 565
(==) S3VIRGE(0): Default visual is TrueColor
(==) S3VIRGE(0): Using HW Cursor
(==) S3VIRGE(0): Using fb.
(==) S3VIRGE(0): mx_cr3a_fix.
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 1.1.0
ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) S3VIRGE(0): initializing int10
(II) S3VIRGE(0): Primary V_BIOS segment is: 0xc000
(WW) System lacks support for changing MTRRs
(II) S3VIRGE(0): VESA BIOS detected
(II) S3VIRGE(0): VESA VBE Version 1.2
(II) S3VIRGE(0): VESA VBE Total Mem: 4096 kB
(II) S3VIRGE(0): VESA VBE OEM: S3 Incorporated. 86C375/86C385
(--) S3VIRGE(0): Chipset: "virge dx"
(==) S3VIRGE(0): XVideo supported.
(II) S3VIRGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) S3VIRGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(--) S3VIRGE(0): No DDC signal
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.7
(II) S3VIRGE(0): I2C bus "I2C bus" initialized.
(II) S3VIRGE(0): I2C device "I2C bus:ddc2" registered at address 0xA0.
(II) S3VIRGE(0): I2C device "I2C bus:ddc2" removed.
(==) S3VIRGE(0): Using gamma correction (1.0, 1.0, 1.0)
(--) S3VIRGE(0): videoram: 4096k
(--) S3VIRGE(0): Detected current MCLK value of 45.102 MHz
(II) S3VIRGE(0): Monitor: Using hsync range of 31.00-82.00 kHz
(II) S3VIRGE(0): Monitor: Using vrefresh range of 55.00-120.00 Hz
(II) S3VIRGE(0): Clock range: 10.00 to 270.00 MHz
(II) S3VIRGE(0): Not using default mode "1280x960" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "640x512" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1600x1200" (horizontal timing out of range)
(II) S3VIRGE(0): Not using default mode "1600x1200" (horizontal timing out of range)
(II) S3VIRGE(0): Not using default mode "1600x1200" (horizontal timing out of range)
(II) S3VIRGE(0): Not using default mode "1600x1200" (horizontal timing out of range)
(II) S3VIRGE(0): Not using default mode "1600x1200" (horizontal timing out of range)
(II) S3VIRGE(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "896x672" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "896x672" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "928x696" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "928x696" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "960x720" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "960x720" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "960x720" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) S3VIRGE(0): Not using default mode "1400x1050" (width too large for virtual size)
(--) S3VIRGE(0): Virtual size is 1280x1024 (pitch 1280)
() S3VIRGE(0): *Mode "1280x1024": 138.5 MHz, 80.2 kHz, 75.0 Hz
(II) S3VIRGE(0): Modeline "1280x1024" 138.54 1280 1368 1504 1728 1024 1025 1028 1069
(
) S3VIRGE(0): *Mode "1152x864": 127.0 MHz, 81.0 kHz, 89.0 Hz
(II) S3VIRGE(0): Modeline "1152x864" 126.99 1152 1232 1360 1568 864 865 868 910
() S3VIRGE(0): *Mode "1024x768": 112.0 MHz, 80.5 kHz, 99.0 Hz
(II) S3VIRGE(0): Modeline "1024x768" 112.04 1024 1096 1208 1392 768 769 772 813
(
) S3VIRGE(0): *Mode "800x600": 82.5 MHz, 75.9 kHz, 118.0 Hz
(II) S3VIRGE(0): Modeline "800x600" 82.55 800 856 944 1088 600 601 604 643
() S3VIRGE(0): *Mode "640x480": 51.4 MHz, 60.6 kHz, 118.0 Hz
(II) S3VIRGE(0): Modeline "640x480" 51.43 640 680 744 848 480 481 484 514
(
) S3VIRGE(0): Mode "1280x1024": 125.1 MHz, 72.4 kHz, 68.0 Hz
(II) S3VIRGE(0): Modeline "1280x1024" 125.14 1280 1368 1504 1728 1024 1025 1028 1065
() S3VIRGE(0): Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
(II) S3VIRGE(0): Modeline "1280x960" 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
(
) S3VIRGE(0): Mode "1152x864": 125.4 MHz, 80.0 kHz, 88.0 Hz
(II) S3VIRGE(0): Modeline "1152x864" 125.43 1152 1232 1360 1568 864 865 868 909
() S3VIRGE(0): Mode "1152x864": 109.4 MHz, 70.5 kHz, 78.0 Hz
(II) S3VIRGE(0): Modeline "1152x864" 109.43 1152 1224 1352 1552 864 865 868 904
(
) S3VIRGE(0): Mode "1152x864": 93.9 MHz, 61.1 kHz, 68.0 Hz
(II) S3VIRGE(0): Modeline "1152x864" 93.90 1152 1224 1344 1536 864 865 868 899
() S3VIRGE(0): Default mode "1152x768": 65.0 MHz, 44.2 kHz, 54.8 Hz
(II) S3VIRGE(0): Modeline "1152x768" 65.00 1152 1178 1314 1472 768 771 777 806 +hsync +vsync
(
) S3VIRGE(0): Mode "1024x768": 110.9 MHz, 79.7 kHz, 98.0 Hz
(II) S3VIRGE(0): Modeline "1024x768" 110.91 1024 1096 1208 1392 768 769 772 813
() S3VIRGE(0): Mode "1024x768": 97.8 MHz, 71.1 kHz, 88.0 Hz
(II) S3VIRGE(0): Modeline "1024x768" 97.84 1024 1088 1200 1376 768 769 772 808
(
) S3VIRGE(0): Mode "1024x768": 86.2 MHz, 62.6 kHz, 78.0 Hz
(II) S3VIRGE(0): Modeline "1024x768" 86.18 1024 1088 1200 1376 768 769 772 803
() S3VIRGE(0): Mode "1024x768": 73.9 MHz, 54.3 kHz, 68.0 Hz
(II) S3VIRGE(0): Modeline "1024x768" 73.89 1024 1080 1192 1360 768 769 772 799
(
) S3VIRGE(0): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) S3VIRGE(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync
() S3VIRGE(0): Mode "800x600": 74.0 MHz, 69.0 kHz, 108.0 Hz
(II) S3VIRGE(0): Modeline "800x600" 73.98 800 848 936 1072 600 601 604 639
(
) S3VIRGE(0): Mode "800x600": 66.7 MHz, 62.2 kHz, 98.0 Hz
(II) S3VIRGE(0): Modeline "800x600" 66.71 800 848 936 1072 600 601 604 635
() S3VIRGE(0): Mode "800x600": 58.7 MHz, 55.6 kHz, 88.0 Hz
(II) S3VIRGE(0): Modeline "800x600" 58.73 800 840 928 1056 600 601 604 632
(
) S3VIRGE(0): Mode "800x600": 51.7 MHz, 49.0 kHz, 78.0 Hz
(II) S3VIRGE(0): Modeline "800x600" 51.73 800 840 928 1056 600 601 604 628
() S3VIRGE(0): Mode "800x600": 44.1 MHz, 42.4 kHz, 68.0 Hz
(II) S3VIRGE(0): Modeline "800x600" 44.13 800 840 920 1040 600 601 604 624
(
) S3VIRGE(0): Default mode "700x525": 77.9 MHz, 81.5 kHz, 74.8 Hz (D)
(II) S3VIRGE(0): Modeline "700x525" 77.90 700 732 892 956 525 526 532 545 doublescan +hsync +vsync
() S3VIRGE(0): Default mode "700x525": 61.0 MHz, 64.9 kHz, 60.0 Hz (D)
(II) S3VIRGE(0): Modeline "700x525" 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync
(
) S3VIRGE(0): Default mode "640x512": 67.5 MHz, 80.0 kHz, 75.0 Hz (D)
(II) S3VIRGE(0): Modeline "640x512" 67.50 640 648 720 844 512 512 514 533 doublescan +hsync +vsync
() S3VIRGE(0): Default mode "640x512": 54.0 MHz, 64.0 kHz, 60.0 Hz (D)
(II) S3VIRGE(0): Modeline "640x512" 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync
(
) S3VIRGE(0): Mode "640x480": 46.8 MHz, 55.2 kHz, 108.0 Hz
(II) S3VIRGE(0): Modeline "640x480" 46.80 640 680 744 848 480 481 484 511
() S3VIRGE(0): Mode "640x480": 42.2 MHz, 49.8 kHz, 98.0 Hz
(II) S3VIRGE(0): Modeline "640x480" 42.22 640 680 744 848 480 481 484 508
(
) S3VIRGE(0): Mode "640x480": 37.0 MHz, 44.4 kHz, 88.0 Hz
(II) S3VIRGE(0): Modeline "640x480" 36.97 640 672 736 832 480 481 484 505
() S3VIRGE(0): Mode "640x480": 32.6 MHz, 39.2 kHz, 78.0 Hz
(II) S3VIRGE(0): Modeline "640x480" 32.64 640 672 736 832 480 481 484 503
(
) S3VIRGE(0): Mode "640x480": 27.7 MHz, 34.0 kHz, 68.0 Hz
(II) S3VIRGE(0): Modeline "640x480" 27.74 640 664 728 816 480 481 484 500
() S3VIRGE(0): Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(II) S3VIRGE(0): Modeline "720x400" 35.50 720 756 828 936 400 401 404 446 -hsync +vsync
(
) S3VIRGE(0): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) S3VIRGE(0): Modeline "640x400" 31.50 640 672 736 832 400 401 404 445 -hsync +vsync
() S3VIRGE(0): Default mode "576x432": 54.0 MHz, 67.5 kHz, 75.0 Hz (D)
(II) S3VIRGE(0): Modeline "576x432" 54.00 576 608 672 800 432 432 434 450 doublescan +hsync +vsync
(
) S3VIRGE(0): Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) S3VIRGE(0): Modeline "640x350" 31.50 640 672 736 832 350 382 385 445 +hsync -vsync
() S3VIRGE(0): Default mode "576x384": 32.5 MHz, 44.2 kHz, 54.8 Hz (D)
(II) S3VIRGE(0): Modeline "576x384" 32.50 576 589 657 736 384 385 388 403 doublescan +hsync +vsync
(
) S3VIRGE(0): Default mode "512x384": 47.2 MHz, 68.7 kHz, 85.0 Hz (D)
(II) S3VIRGE(0): Modeline "512x384" 47.25 512 536 584 688 384 384 386 404 doublescan +hsync +vsync
() S3VIRGE(0): Default mode "512x384": 39.4 MHz, 60.1 kHz, 75.1 Hz (D)
(II) S3VIRGE(0): Modeline "512x384" 39.40 512 520 568 656 384 384 386 400 doublescan +hsync +vsync
(
) S3VIRGE(0): Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
(II) S3VIRGE(0): Modeline "512x384" 37.50 512 524 592 664 384 385 388 403 doublescan -hsync -vsync
() S3VIRGE(0): Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(II) S3VIRGE(0): Modeline "512x384" 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync
(
) S3VIRGE(0): Default mode "512x384": 22.4 MHz, 35.5 kHz, 87.1 Hz (D)
(II) S3VIRGE(0): Modeline "512x384" 22.45 512 516 604 632 384 384 388 409 interlace doublescan +hsync +vsync
() S3VIRGE(0): Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
(II) S3VIRGE(0): Modeline "416x312" 28.64 416 432 464 576 312 312 314 333 doublescan -hsync -vsync
(
) S3VIRGE(0): Default mode "400x300": 28.1 MHz, 53.7 kHz, 85.3 Hz (D)
(II) S3VIRGE(0): Modeline "400x300" 28.15 400 416 448 524 300 300 302 315 doublescan +hsync +vsync
() S3VIRGE(0): Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
(II) S3VIRGE(0): Modeline "400x300" 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync
(
) S3VIRGE(0): Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(II) S3VIRGE(0): Modeline "400x300" 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync
() S3VIRGE(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) S3VIRGE(0): Modeline "400x300" 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync
(
) S3VIRGE(0): Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(II) S3VIRGE(0): Modeline "400x300" 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync
() S3VIRGE(0): Default mode "320x240": 18.0 MHz, 43.3 kHz, 85.2 Hz (D)
(II) S3VIRGE(0): Modeline "320x240" 18.00 320 348 376 416 240 240 242 254 doublescan -hsync -vsync
(
) S3VIRGE(0): Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
(II) S3VIRGE(0): Modeline "320x240" 15.75 320 328 360 420 240 240 242 250 doublescan -hsync -vsync
() S3VIRGE(0): Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D)
(II) S3VIRGE(0): Modeline "320x240" 15.75 320 332 352 416 240 244 245 260 doublescan -hsync -vsync
(
) S3VIRGE(0): Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(II) S3VIRGE(0): Modeline "320x240" 12.60 320 328 376 400 240 245 246 262 doublescan -hsync -vsync
() S3VIRGE(0): Default mode "360x200": 17.8 MHz, 37.9 kHz, 85.0 Hz (D)
(II) S3VIRGE(0): Modeline "360x200" 17.75 360 378 414 468 200 200 202 223 doublescan -hsync +vsync
(
) S3VIRGE(0): Default mode "320x200": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(II) S3VIRGE(0): Modeline "320x200" 15.75 320 336 368 416 200 200 202 222 doublescan -hsync +vsync
() S3VIRGE(0): Default mode "320x175": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(II) S3VIRGE(0): Modeline "320x175" 15.75 320 336 368 416 175 191 192 222 doublescan +hsync -vsync
(
) S3VIRGE(0): Display dimensions: (400, 300) mm
() S3VIRGE(0): DPI set to (81, 86)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
0 0 0xe0000000 - 0xe3ffffff (0x4000000) MS[B]
[1] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[6] -1 0 0xe0000000 - 0xe3ffffff (0x4000000) MX[B](B)
[7] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[8] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[9] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[11] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[12] -1 0 0x00006400 - 0x0000641f (0x20) IX[B]
[13] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[14] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[15] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) S3VIRGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) S3VIRGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(
) S3VIRGE(0): Using FB
(II) S3VIRGE(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
CPU to Screen color expansion
Solid Horizontal and Vertical Lines
Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
20 128x128 slots
5 256x256 slots
(==) S3VIRGE(0): Backing store disabled
(==) S3VIRGE(0): Silken mouse enabled
() Option "dpms"
(
) S3VIRGE(0): DPMS enabled
(II) S3VIRGE(0): Using overlay video
(WW) S3VIRGE(0): Option "noVBE" is not used
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
() Option "CoreKeyboard"
(
) Keyboard: Core Keyboard
() Option "Protocol" "Standard"
(
) Keyboard: Protocol: Standard
() Option "AutoRepeat" "500 30"
(
) Option "XkbRules" "xfree86"
() Keyboard: XkbRules: "xfree86"
(
) Option "XkbModel" "pc105"
() Keyboard: XkbModel: "pc105"
(
) Option "XkbLayout" "de"
() Keyboard: XkbLayout: "de"
(
) Option "XkbVariant" "nodeadkeys"
() Keyboard: XkbVariant: "nodeadkeys"
(
) Option "CustomKeycodes" "off"
() Keyboard: CustomKeycodes disabled
(
) Option "Protocol" "microsoft"
() Mouse[1]: Device: "/dev/ttyS0"
(
) Mouse[1]: Protocol: "microsoft"
() Option "CorePointer"
(
) Mouse[1]: Core Pointer
() Option "Device" "/dev/ttyS0"
(
) Option "BaudRate" "1200"
() Option "StopBits" "1"
(
) Option "DataBits" "7"
() Option "Parity" "None"
(
) Option "Vmin" "1"
() Option "Vtime" "0"
(
) Option "FlowControl" "None"
(==) Mouse[1]: Emulate3Buttons, Emulate3Timeout: 50
(==) Mouse[1]: Buttons: 3
(**) Mouse[1]: BaudRate: 1200
(II) XINPUT: Adding extended input device "Mouse[1]" (type: MOUSE)
(II) XINPUT: Adding extended input device "Keyboard" (type: KEYBOARD)
Could not init font path element /usr/X11R6/lib/X11/fonts/local, removing from list!
Could not init font path element /usr/X11R6/lib/X11/fonts/CID, removing from list!
(II) Open APM successful
(II) S3VIRGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
Mitglied: mexx
mexx 25.10.2005 um 09:34:55 Uhr
Goto Top
Und die xconf.org


  1. /.../
  2. SaX generated X11 config file
  3. Created on: 2005-10-25T10:41:12+0200.
#
  1. Version: 4.8
  2. Contact: Marcus Schaefer <sax@suse.de>, 2002
#
  1. Automatically generated by [SaX2] (4.8)
  2. PLEASE DO NOT EDIT THIS FILE!
#

Section "Files"
FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/local"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/URW"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo"
FontPath "/usr/X11R6/lib/X11/fonts/PEX"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/latin7/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/baekmuk:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/japanese:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/kwintv"
FontPath "/usr/X11R6/lib/X11/fonts/truetype"
FontPath "/usr/X11R6/lib/X11/fonts/uni:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/CID"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/misc/sgi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/xtest"
FontPath "/opt/kde3/share/fonts"
InputDevices "/dev/ttyS0"
InputDevices "/dev/ttyS1"
InputDevices "/dev/ttyS2"
InputDevices "/dev/ttyS3"
InputDevices "/dev/ttyS4"
InputDevices "/dev/ttyS5"
InputDevices "/dev/ttyS6"
InputDevices "/dev/ttyS7"
InputDevices "/dev/ttyS8"
InputDevices "/dev/psaux"
InputDevices "/dev/logibm"
InputDevices "/dev/sunmouse"
InputDevices "/dev/atibm"
InputDevices "/dev/amigamouse"
InputDevices "/dev/atarimouse"
InputDevices "/dev/inportbm"
InputDevices "/dev/gpmdata"
InputDevices "/dev/mouse"
InputDevices "/dev/usbmouse"
InputDevices "/dev/adbmouse"
InputDevices "/dev/input/mice"
InputDevices "/dev/input/event0"
InputDevices "/dev/pointer0"
InputDevices "/dev/pointer1"
InputDevices "/dev/pointer2"
InputDevices "/dev/pointer3"
EndSection

Section "Module"
Load "dbe"
Load "type1"
Load "freetype"
Load "extmod"
Load "glx"
Load "v4l"
EndSection

Section "ServerFlags"
Option "AllowMouseOpenFail"
EndSection

Section "InputDevice"
Driver "kbd"
Identifier "Keyboard"
Option "Protocol" "Standard"
Option "XkbLayout" "de"
Option "XkbModel" "pc105"
Option "XkbRules" "xfree86"
Option "XkbVariant" "nodeadkeys"
EndSection

Section "InputDevice"
Driver "mouse"
Identifier "Mouse[1]"
Option "Device" "/dev/ttyS0"
Option "Name" "Logitech First/Pilot Mouse"
Option "Protocol" "microsoft"
Option "Vendor" "Sysp"
EndSection


Section "Monitor"
DisplaySize 400 300
HorizSync 31-82
Identifier "Monitor"
ModelName "MULTISYNC E1100"
Option "DPMS"
VendorName "NEC"
VertRefresh 55-120
UseModes "Modes"
EndSection


Section "Modes"
Identifier "Modes"
Modeline "1280x1024" 125.14 1280 1368 1504 1728 1024 1025 1028 1065
Modeline "1280x1024" 138.54 1280 1368 1504 1728 1024 1025 1028 1069
Modeline "1152x864" 93.90 1152 1224 1344 1536 864 865 868 899
Modeline "1152x864" 109.43 1152 1224 1352 1552 864 865 868 904
Modeline "1152x864" 125.43 1152 1232 1360 1568 864 865 868 909
Modeline "1152x864" 126.99 1152 1232 1360 1568 864 865 868 910
Modeline "1024x768" 73.89 1024 1080 1192 1360 768 769 772 799
Modeline "1024x768" 86.18 1024 1088 1200 1376 768 769 772 803
Modeline "1024x768" 97.84 1024 1088 1200 1376 768 769 772 808
Modeline "1024x768" 110.91 1024 1096 1208 1392 768 769 772 813
Modeline "1024x768" 112.04 1024 1096 1208 1392 768 769 772 813
Modeline "800x600" 44.13 800 840 920 1040 600 601 604 624
Modeline "800x600" 51.73 800 840 928 1056 600 601 604 628
Modeline "800x600" 58.73 800 840 928 1056 600 601 604 632
Modeline "800x600" 66.71 800 848 936 1072 600 601 604 635
Modeline "800x600" 73.98 800 848 936 1072 600 601 604 639
Modeline "800x600" 82.55 800 856 944 1088 600 601 604 643
Modeline "640x480" 27.74 640 664 728 816 480 481 484 500
Modeline "640x480" 32.64 640 672 736 832 480 481 484 503
Modeline "640x480" 36.97 640 672 736 832 480 481 484 505
Modeline "640x480" 42.22 640 680 744 848 480 481 484 508
Modeline "640x480" 46.80 640 680 744 848 480 481 484 511
Modeline "640x480" 51.43 640 680 744 848 480 481 484 514
EndSection


Section "Device"
BoardName "ViRGE/DX"
BusID "0:10:0"
Driver "s3virge"
Identifier "Device"
Option "noVBE"
VendorName "S3"
EndSection


Section "Screen"
DefaultDepth 16
SubSection "Display"
Depth 15
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
Device "Device"
Identifier "Screen"
Monitor "Monitor"
EndSection


Section "ServerLayout"
Identifier "Layout[all]"
InputDevice "Keyboard" "CoreKeyboard"
InputDevice "Mouse[1]" "CorePointer"
Screen "Screen"
EndSection

Section "DRI"
Group "video"
Mode 0660
EndSection
Mitglied: geTuemII
geTuemII 25.10.2005 um 10:16:49 Uhr
Goto Top
Hi mexx,

die Grafika ist absolut Standard, und das logFile sieht auch gut aus. Kann es sein, daß der Monitor die eingestellte Frequenz nicht mitmacht? Prüfe das doch bitte nochmal.
Sorry, wenn das nix hilft, muss ich erstmal drüber nachdenken.

Gruss, geTuemII
Mitglied: mexx
mexx 25.10.2005 um 10:31:47 Uhr
Goto Top
An welcher stelle ändere ich die Frequenz?
Mitglied: geTuemII
geTuemII 25.10.2005 um 13:31:07 Uhr
Goto Top
Im Logfile steht, daß ein NEC Multisync E1100 erkannt wurde, das ist ein sehr guter 21" CRT-Monitor. ast Du den auch wirklich? Ansonsten im Sax2 (oder bei neueren Systemen IMHO auch im Yast2) eine richtigen Monitor einstellen.

geTuemII
Mitglied: mexx
mexx 25.10.2005 um 14:29:36 Uhr
Goto Top
Ich habe diesen sehr guten Monitor tatsächlich face-big-smile !!!

Hmm, bin nun endgültig von Runlevel 5 auf 3 umgestiegen. Brauche die Oberfläche nicht zwingend. Wäre aber schöner gewesen. gerade für das konfigurieren und senden von mails.
Mitglied: 2795
2795 31.10.2005 um 15:40:19 Uhr
Goto Top
Hi,

mal abgesehen von deinem Grafikproblem, das wahrscheinlich eine Mischung aus alter Grafikkarte und tollen Monitor ist - kenne ich dieses Boot-Problem auch.
Nach mehreren Versuchen habe ich das Gefühl, das SUSE(ab 9.2) sich nur bei PC's mit CPU > 1GHz installieren läßt.

Achso, deine S3-Grafikkarte. Folgender Vorschlag von "640x480" mit 60Hz.
Im Augenblick, wenn ich es richtig gesehen habe, ist "1280x1024" eingestellt.


Kerl
Mitglied: tueftler2
tueftler2 16.01.2006 um 20:01:59 Uhr
Goto Top
Hallo Kerl
Nach mehreren Versuchen habe ich das
Gefühl, das SUSE(ab 9.2) sich nur bei
PC's mit CPU > 1GHz installieren
läßt.

habe suse mittlerweile 10 auf nem alten 850 p3 mit 8 mb ati und 1600x1200dpi und funktioniert immer prima. linux macht alles !!! face-wink
für mexx

starte mal einfach mit knoppix und schau dir die konfig an. die stellst du dann bei suse ein, dann klappts bestimmt, wenn die komponenten erkannt werden.

gruß
der tüftler
Mitglied: 2795
2795 17.01.2006 um 13:26:24 Uhr
Goto Top
hi @tüftler,

inzwischen habe ich SUSE auch auf einem alten 800 p3 zu laufen. Davor habe ich mal mit einem 400 p2 probiert. Mit dem Ergebnis, das sich SUSE beim Hardwarecheck aufgehängt hat.
Insofern revidiere ich an dieser Stelle meine Aussage. face-smile
Und behaupte SUSE(ab 9.2) arbeitet erst mit PC's ab 500MHz zusammen. Aber glücklich, glücklich wird man damit nicht.

Kerl