montecristo
Goto Top

W-LAN Treiber für Linux (Debian 8 )

Hej

Ich hab ein kleines Problem, ich hab hier ein Lenovo E31 auf dem ich Debian installiert habe.

Es läuft alles ausser das W-LAN.

lspci gibt mir folgendes aus:
00:00.0 Host bridge: Intel Corporation Device 1904 (rev 08)
00:02.0 VGA compatible controller: Intel Corporation Device 1916 (rev 07)
00:14.0 USB controller: Intel Corporation Device 9d2f (rev 21)
00:14.2 Signal processing controller: Intel Corporation Device 9d31 (rev 21)
00:16.0 Communication controller: Intel Corporation Device 9d3a (rev 21)
00:17.0 SATA controller: Intel Corporation Device 9d03 (rev 21)
00:1c.0 PCI bridge: Intel Corporation Device 9d14 (rev f1)
00:1c.5 PCI bridge: Intel Corporation Device 9d15 (rev f1)
00:1f.0 ISA bridge: Intel Corporation Device 9d48 (rev 21)
00:1f.2 Memory controller: Intel Corporation Device 9d21 (rev 21)
00:1f.3 Audio device: Intel Corporation Device 9d70 (rev 21)
00:1f.4 SMBus: Intel Corporation Device 9d23 (rev 21)
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15)
02:00.0 Network controller: Qualcomm Atheros Device 0042 (rev 30)
Ich hab schon im Netz gesucht und den Artikel gefunden; http://askubuntu.com/questions/708061/qualcomm-atheros-device-168c0042- ...

Hat aber leider auch nicht geholfen.

Ich bin nicht der Held in Sachen Linux, habe aber grad mit dem LPIC 1 angefangen, weil ich doch sehr interessiert bin ^^

Hoffe es kann mir jemand helfen das "Problem" zu lösen

Gruss MonteCristo

Content-Key: 298031

Url: https://administrator.de/contentid/298031

Ausgedruckt am: 28.03.2024 um 16:03 Uhr

Mitglied: michi1983
michi1983 03.03.2016 um 10:39:12 Uhr
Goto Top
Hallo,

schau dir mal den 3. Post ganz genau durch und befolge die Schritte 1:1, dann sollte es klappen.
http://ubuntuforums.org/showthread.php?t=2298485&highlight=ath10k

Gruß
Mitglied: MonteCristo
MonteCristo 03.03.2016 aktualisiert um 12:16:40 Uhr
Goto Top
Hej

Danke. Das hab ich auch schon versucht.

Am Schluss macht er das:
....@ch80:~$ cd backports-20150903
....@ch80:~/backports-20150903$ make defconfig-ath10k
/bin/bash: Zeile 47: .kernel_config_md5: Keine Berechtigung
Makefile:40: recipe for target 'defconfig-ath10k' failed  
make: *** [defconfig-ath10k] Error 1
.....@ch80:~/backports-20150903$ make
/bin/bash: Zeile 47: .kernel_config_md5: Keine Berechtigung
Makefile:40: recipe for target 'modules' failed  
make[1]: *** [modules] Error 1
Makefile:30: recipe for target 'default' failed  
make: *** [default] Error 2
....@ch80:~/backports-20150903$ sudo make install
bash: sudo: Kommando nicht gefunden.
....@ch80:~/backports-20150903$ git clone https://github.com/atondwal/ath10k-firmware.git
bash: git: Kommando nicht gefunden.
.....@ch80:~/backports-20150903$ sudo cp -r ath10k-firmware/ath10k/ /lib/firmware/
bash: sudo: Kommando nicht gefunden.
.....@ch80:~/backports-20150903$ cd /lib/firmware/ath10k/QCA6164
bash: cd: /lib/firmware/ath10k/QCA6164: Datei oder Verzeichnis nicht gefunden
....@ch80:~/backports-20150903$ sudo cp -r hw2.1/ /lib/firmware/ath10k/QCA6174/
Und dann ist macht er nicht weiter. Reboot aber nix geht face-sad
Mitglied: michi1983
michi1983 03.03.2016 aktualisiert um 11:43:20 Uhr
Goto Top
....@ch80:~$ cd backports-20150903
Warum machst du das überhaupt?
In der Anleitung steht doch ausdrücklich:
If you get a new kernel
Du hast ja jetzt noch keinen neuen Kernel bekommen während du den 1. Teil der Anleitung abgearbeitet hast oder?