43344
May 18, 2007, updated at 09:08:04 (UTC)
7158
2
0
Windows PXE LAN Installation via Suse 10.2
Moin,
bräuchte mal eure kompetente Hilfe!
Ich versuche Windows übers Netz zu installieren. Das Image liegt dabei auf einer Suse 10.2 Machine.
Der zukünftige Windows Client bekommt per DHCP eine IP zugewiesen, woraus ich mal schließe, dass die PXE/TFTP Konfiguration grundsätzlich richtig ist ;)
Wenn er allerdings die "default" (liegt bei mir in "/tftpboot/pxelinux.cfg/") sucht, steigt er nach geraumer Suchzeit mit der Meldung: "unable to locate configuration file" aus.
Kann mir da jemand einen Tip geben, woran das liegen könnte ?????
Grüße vom Dorf
bräuchte mal eure kompetente Hilfe!
Ich versuche Windows übers Netz zu installieren. Das Image liegt dabei auf einer Suse 10.2 Machine.
Der zukünftige Windows Client bekommt per DHCP eine IP zugewiesen, woraus ich mal schließe, dass die PXE/TFTP Konfiguration grundsätzlich richtig ist ;)
Wenn er allerdings die "default" (liegt bei mir in "/tftpboot/pxelinux.cfg/") sucht, steigt er nach geraumer Suchzeit mit der Meldung: "unable to locate configuration file" aus.
Kann mir da jemand einen Tip geben, woran das liegen könnte ?????
Grüße vom Dorf
Please also mark the comments that contributed to the solution of the article
Content-Key: 59271
Url: https://administrator.de/contentid/59271
Printed on: April 24, 2024 at 12:04 o'clock
2 Comments
Latest comment