Top-Themen

Aktuelle Themen (A bis Z)

Administrator.de FeedbackApache ServerAppleAssemblerAudioAusbildungAuslandBackupBasicBatch & ShellBenchmarksBibliotheken & ToolkitsBlogsCloud-DiensteClusterCMSCPU, RAM, MainboardsCSSC und C++DatenbankenDatenschutzDebianDigitiales FernsehenDNSDrucker und ScannerDSL, VDSLE-BooksE-BusinessE-MailEntwicklungErkennung und -AbwehrExchange ServerFestplatten, SSD, RaidFirewallFlatratesGoogle AndroidGrafikGrafikkarten & MonitoreGroupwareHardwareHosting & HousingHTMLHumor (lol)Hyper-VIconsIDE & EditorenInformationsdiensteInstallationInstant MessagingInternetInternet DomäneniOSISDN & AnaloganschlüsseiTunesJavaJavaScriptKiXtartKVMLAN, WAN, WirelessLinuxLinux DesktopLinux NetzwerkLinux ToolsLinux UserverwaltungLizenzierungMac OS XMicrosoftMicrosoft OfficeMikroTik RouterOSMonitoringMultimediaMultimedia & ZubehörNetzwerkeNetzwerkgrundlagenNetzwerkmanagementNetzwerkprotokolleNotebook & ZubehörNovell NetwareOff TopicOpenOffice, LibreOfficeOutlook & MailPapierkorbPascal und DelphiPeripheriegerätePerlPHPPythonRechtliche FragenRedHat, CentOS, FedoraRouter & RoutingSambaSAN, NAS, DASSchriftartenSchulung & TrainingSEOServerServer-HardwareSicherheitSicherheits-ToolsSicherheitsgrundlagenSolarisSonstige SystemeSoziale NetzwerkeSpeicherkartenStudentenjobs & PraktikumSuche ProjektpartnerSuseSwitche und HubsTipps & TricksTK-Netze & GeräteUbuntuUMTS, EDGE & GPRSUtilitiesVB for ApplicationsVerschlüsselung & ZertifikateVideo & StreamingViren und TrojanerVirtualisierungVisual StudioVmwareVoice over IPWebbrowserWebentwicklungWeiterbildungWindows 7Windows 8Windows 10Windows InstallationWindows MobileWindows NetzwerkWindows ServerWindows SystemdateienWindows ToolsWindows UpdateWindows UserverwaltungWindows VistaWindows XPXenserverXMLZusammenarbeit

Acronis True Image Echo auf Suse Linux 9.3 mit Kernel 2.6.11.4-20a SNAPAPI wird nicht erstellt

Frage Linux Suse

Mitglied: MSC

MSC (Level 1) - Jetzt verbinden

27.03.2009, aktualisiert 16:08 Uhr, 5874 Aufrufe

Bei der Installation von Acronis True Image Echo Built 8203, läuft auf einem Suse System 10.3 einwandfrei, bricht die Installation bei der Compelierung des SAPAPI Moduls mit der Fehlermeldung ab das das SNAPAPI Modul nicht fertiggestellt werden kann.
Kernel Source, DKMS usw. sind installiert.

Hat jemand von euch Acronis auf einem 9.x Suse System fertig instalieren können?

Hier der Inhalt der beiden Insatllations Logs mit den entsprechenden Meldungen vielleicht kann ja jemand diese richtig interpretieren.

Herzlich Dank für eure Unterstützung

MSC

Trueimage-setup.log
______________________

glibc version is: 2.4

Detected mdk10: 0x0000

Detected mdk10: 0x0000

Detected mdk: 0x0000

Detected mdk: 0x0000

Detected deb: 0x0000

Detected deb: 0x0000

Detected suse91: 0x0000

Detected suse92: 0x0000

Detected suse93: 0x0000

Detected fc4: 0x0000

Detected fc5: 0x0000

Detected virtuozzo: 0x0000

Detected virtuozzo: 0x0000

Detected esx25: 0x0000

Detected esx25: 0x0000

Detected esx3: 0x0000

Detected esx3: 0x0000

glibc version is: 2.4

glibc version is: 2.4

glibc version is: 2.4

glibc version is: 2.4

glibc version is: 2.4

glibc version is: 2.4

Running 'rpm -U --percent --force --nodeps /tmp/RPMS.HX9Xsa/dkms-2.0.16-1.noarch.rpm':
finished with exit code 0
Running 'rpm -U --percent --force --nodeps /tmp/RPMS.HX9Xsa/snapapi26_modules-0.7.28-1.noarch.rpm':
finished with exit code 0
Running 'rpm -U --percent --force --nodeps /tmp/RPMS.HX9Xsa/acronis-glibc-1.0-0.noarch.rpm':
finished with exit code 0
Running 'rpm -U --percent --force --nodeps /tmp/RPMS.HX9Xsa/MediaBuilder-9.5.8018-1.i386.rpm':
finished with exit code 0
glibc version is: 2.4

Running 'rpm -e trueimage':
error: package trueimage is not installed
finished with exit code 256
Running 'rpm -U --percent --force --nodeps /tmp/RPMS.HX9Xsa/TrueImageClient-9.5.8018-1.i386.rpm':
ln: Erzeugen der symbolischen Verknüpfung „/root/Desktop/TrueImage.desktop“ zu „/usr/lib/Acronis/TrueImageEchoServer/TrueImage.desktop“: Datei oder Verzeichnis nicht gefunden
finished with exit code 0
glibc version is: 2.4

glibc version is: 2.4

glibc version is: 2.4

glibc version is: 2.4

Launching '/usr/sbin/dkms install -m snapapi26 -v 0.7.28 2>&1'.

Error! DKMS tree does not contain: snapapi26-0.7.28
Build cannot continue without the proper tree.

Launching '/usr/sbin/dkms ldtarball --force --archive /usr/lib/Acronis/kernel_modules/snapapi26-0.7.28-all.tar.gz 2>&1'.

Warning! This tarball was created with dkms < 2.0 and contains
no arch info. DKMS will assume the arch: i586

Loading tarball for module: snapapi26 / version: 0.7.28

Loading /usr/src/snapapi26-0.7.28...
Creating /var/lib/dkms/snapapi26/0.7.28/source symlink...

DKMS: ldtarball Completed.

Launching '/usr/sbin/dkms install -m snapapi26 -v 0.7.28 2>&1'.

Error! Could not locate snapapi26.ko for module snapapi26 in the DKMS tree.
You must run a dkms build for kernel 2.6.16.54-0.2.5-smp (i586) first.


Error! Your kernel source for kernel 2.6.16.54-0.2.5-smp cannot be found at
/lib/modules/2.6.16.54-0.2.5-smp/build or /lib/modules/2.6.16.54-0.2.5-smp/source.
You can use the --kernelsourcedir option to tell DKMS where it's located.
exited with status 1.
Das Setup von Acronis True Image Echo Server konnte die Kernel-Module nicht erstellen. Konsultieren Sie /var/log/trueimage-setup.log und /var/lib/dkms/snapapi26/0.7.28/build/make.log, um die Fehlermeldungen zu sehen.
glibc version is: 2.4

Detected mdk10: 0x0000

Detected mdk10: 0x0000

Detected mdk: 0x0000

Detected mdk: 0x0000

Detected deb: 0x0000

Detected deb: 0x0000

Detected suse91: 0x0000

Detected suse92: 0x0000

Detected suse93: 0x0000

Detected fc4: 0x0000

Detected fc5: 0x0000

Detected virtuozzo: 0x0000

Detected virtuozzo: 0x0000

Detected esx25: 0x0000

Detected esx25: 0x0000

Detected esx3: 0x0000

Detected esx3: 0x0000

glibc version is: 2.4

glibc version is: 2.4

glibc version is: 2.4

glibc version is: 2.4

glibc version is: 2.4

glibc version is: 2.4

Running 'rpm -U --percent --force --nodeps /tmp/RPMS.QhcGKZ/dkms-2.0.16-1.noarch.rpm':
finished with exit code 0
Running 'rpm -U --percent --force --nodeps /tmp/RPMS.QhcGKZ/snapapi26_modules-0.7.28-1.noarch.rpm':
finished with exit code 0
Running 'rpm -U --percent --force --nodeps /tmp/RPMS.QhcGKZ/acronis-glibc-1.0-0.noarch.rpm':
finished with exit code 0
Running 'rpm -U --percent --force --nodeps /tmp/RPMS.QhcGKZ/MediaBuilder-9.5.8018-1.i386.rpm':
finished with exit code 0
glibc version is: 2.4

Running 'rpm -e trueimage':
error: package trueimage is not installed
finished with exit code 256
Running 'rpm -U --percent --force --nodeps /tmp/RPMS.QhcGKZ/TrueImageClient-9.5.8018-1.i386.rpm':
ln: Erzeugen der symbolischen Verknüpfung „/root/Desktop/TrueImage.desktop“ zu „/usr/lib/Acronis/TrueImageEchoServer/TrueImage.desktop“: Datei oder Verzeichnis nicht gefunden
finished with exit code 0
glibc version is: 2.4

glibc version is: 2.4

glibc version is: 2.4

glibc version is: 2.4

Launching '/usr/sbin/dkms install -m snapapi26 -v 0.7.28 2>&1'.

Error! This module/version combo is already installed
for kernel: 2.6.16.54-0.2.5-bigsmp (i586)

Launching '/usr/sbin/dkms uninstall -m snapapi26 -v 0.7.28 2>&1'.

Uninstall Beginning --------
Module: snapapi26
Version: 0.7.28
Kernel: 2.6.16.54-0.2.5-bigsmp (i586)
Status: Before uninstall, this module version was ACTIVE on this kernel.
Removing any linked weak-modules

snapapi26.ko:
- Uninstallation
- Deleting from: /lib/modules/2.6.16.54-0.2.5-bigsmp/kernel/drivers/bloc k
- Original module
- No original module was found for this module on this kernel.
- Use the dkms install command to reinstall any previous module version.


snumbd26.ko:
- Uninstallation
- Deleting from: /lib/modules/2.6.16.54-0.2.5-bigsmp/kernel/drivers/block

- Original module
- No original module was found for this module on this kernel.
- Use the dkms install command to reinstall any previous module version.


DKMS: uninstall Completed.

Launching '/usr/sbin/dkms install -m snapapi26 -v 0.7.28 2>&1'.
Running module version sanity check.

snapapi26.ko:
- Original module
- No original module exists within this kernel
- Installation
- Installing to /lib/modules/2.6.16.54-0.2.5-bigsmp/kernel/drivers/bloc k

snumbd26.ko:
- Original module
- No original module exists within this kernel
- Installation
- Installing to /lib/modules/2.6.16.54-0.2.5-bigsmp/kernel/drivers/block

Adding any weak-modules

depmod......

DKMS: install Completed.

Data file gui_config.german not found
Data file gui_config.german not found
glibc version is: 2.4

Detected mdk10: 0x0000

Detected mdk10: 0x0000

Detected mdk: 0x0000

Detected mdk: 0x0000

Detected deb: 0x0000

Detected deb: 0x0000

Detected suse80: 0x0000

Detected suse80: 0x0000

Detected suse91: 0x0000

Detected suse92: 0x0000

Detected suse93: 0x0000

Detected fc4: 0x0000

Detected fc5: 0x0000

Detected virtuozzo: 0x0000

Detected virtuozzo: 0x0000

Detected esx25: 0x0000

Detected esx25: 0x0000

Detected esx3: 0x0000

Detected esx3: 0x0000

glibc version is: 2.4

glibc version is: 2.4

glibc version is: 2.4

glibc version is: 2.4

glibc version is: 2.4

glibc version is: 2.4

Running 'rpm -U --percent --force --nodeps /tmp/RPMS.hyJDID/dkms-2.0.16-1.noarch.rpm':
finished with exit code 0
Running 'rpm -U --percent --force --nodeps /tmp/RPMS.hyJDID/snapapi26_modules-0.7.29-1.noarch.rpm':
finished with exit code 0
Running 'rpm -U --percent --force --nodeps /tmp/RPMS.hyJDID/acronis-glibc-1.0-0.noarch.rpm':
finished with exit code 0
Running 'rpm -U --percent --force --nodeps /tmp/RPMS.hyJDID/MediaBuilder-9.5.8076-1.i386.rpm':
finished with exit code 0
glibc version is: 2.4

Running 'rpm -e trueimage':
error: package trueimage is not installed
finished with exit code 256
Running 'rpm -U --percent --force --nodeps /tmp/RPMS.hyJDID/TrueImageClient-9.5.8076-1.i386.rpm':
ln: Erzeugen der symbolischen Verknüpfung „/root/Desktop/TrueImage.desktop“ zu „/usr/lib/Acronis/TrueImageEchoServer/TrueImage.desktop“: Datei oder Verzeichnis nicht gefunden
finished with exit code 0
glibc version is: 2.4

glibc version is: 2.4

glibc version is: 2.4

glibc version is: 2.4

Launching '/usr/sbin/dkms install -m snapapi26 -v 0.7.29 2>&1'.

Error! DKMS tree does not contain: snapapi26-0.7.29
Build cannot continue without the proper tree.

Launching '/usr/sbin/dkms ldtarball --force --archive /usr/lib/Acronis/kernel_modules/snapapi26-0.7.29-all.tar.gz 2>&1'.

Warning! This tarball was created with dkms < 2.0 and contains
no arch info. DKMS will assume the arch: i586

Loading tarball for module: snapapi26 / version: 0.7.29

Loading /usr/src/snapapi26-0.7.29...
Creating /var/lib/dkms/snapapi26/0.7.29/source symlink...

DKMS: ldtarball Completed.

Launching '/usr/sbin/dkms install -m snapapi26 -v 0.7.29 2>&1'.

Error! Could not locate snapapi26.ko for module snapapi26 in the DKMS tree.
You must run a dkms build for kernel 2.6.16.54-0.2.5-bigsmp (i586) first.


Preparing kernel 2.6.16.54-0.2.5-bigsmp for module build:
(This is not compiling a kernel, just preparing kernel symbols)
Storing current .config to be restored when complete
using presented .config
make oldconfig.....
make prepare-all....

Building module:
cleaning build area....
make KERNELRELEASE=2.6.16.54-0.2.5-bigsmp -C /lib/modules/2.6.16.54-0.2.5-bigsmp/build SUBDIRS=/var/lib/dkms/snapapi26/0.7.29/build modules.....
cleaning build area....
cleaning kernel tree (make mrproper).....

DKMS: build Completed.
exited with status 0.
Launching '/usr/sbin/dkms install -m snapapi26 -v 0.7.29 2>&1'.
Running module version sanity check.

snapapi26.ko:
- Original module
- No original module exists within this kernel
- Installation
- Installing to /lib/modules/2.6.16.54-0.2.5-bigsmp/kernel/drivers/bloc k

snumbd26.ko:
- Original module
- No original module exists within this kernel
- Installation
- Installing to /lib/modules/2.6.16.54-0.2.5-bigsmp/kernel/drivers/block

Adding any weak-modules

depmod......

DKMS: install Completed.

Data file gui_config.german not found
Data file gui_config.german not found
glibc version is: 2.4

Detected mdk10: 0x0000

Detected mdk10: 0x0000

Detected mdk: 0x0000

Detected mdk: 0x0000

Detected deb: 0x0000

Detected deb: 0x0000

Detected suse80: 0x0000

Detected suse80: 0x0000

Detected suse91: 0x0000

Detected suse92: 0x0000

Detected suse93: 0x0000

Detected fc4: 0x0000

Detected fc5: 0x0000

Detected virtuozzo: 0x0000

Detected virtuozzo: 0x0000

Detected esx25: 0x0000

Detected esx25: 0x0000

Detected esx3: 0x0000

Detected esx3: 0x0000

glibc version is: 2.4

glibc version is: 2.4

glibc version is: 2.4

glibc version is: 2.4

glibc version is: 2.4

glibc version is: 2.4

Running 'rpm -U --percent --force --nodeps /tmp/RPMS.EdIa3r/dkms-2.0.16-1.noarch.rpm':
finished with exit code 0
Running 'rpm -U --percent --force --nodeps /tmp/RPMS.EdIa3r/snapapi26_modules-0.7.29-1.noarch.rpm':
finished with exit code 0
Running 'rpm -U --percent --force --nodeps /tmp/RPMS.EdIa3r/acronis-glibc-1.0-0.noarch.rpm':
finished with exit code 0
Running 'rpm -U --percent --force --nodeps /tmp/RPMS.EdIa3r/MediaBuilder-9.5.8076-1.i386.rpm':
finished with exit code 0
glibc version is: 2.4

Running 'rpm -e trueimage':
error: package trueimage is not installed
finished with exit code 256
Running 'rpm -U --percent --force --nodeps /tmp/RPMS.EdIa3r/TrueImageClient-9.5.8076-1.i386.rpm':
ln: creating symbolic link `/root/Desktop/TrueImage.desktop' to `/usr/lib/Acronis/TrueImageEchoServer/TrueImage.desktop': No such file or directory
finished with exit code 0
glibc version is: 2.4

glibc version is: 2.4

glibc version is: 2.4

glibc version is: 2.4

Launching '/usr/sbin/dkms install -m snapapi26 -v 0.7.29 2>&1'.

Error! This module/version combo is already installed
for kernel: 2.6.16.54-0.2.5-bigsmp (i586)

Launching '/usr/sbin/dkms uninstall -m snapapi26 -v 0.7.29 2>&1'.

Uninstall Beginning --------
Module: snapapi26
Version: 0.7.29
Kernel: 2.6.16.54-0.2.5-bigsmp (i586)
Status: Before uninstall, this module version was ACTIVE on this kernel.
Removing any linked weak-modules

snapapi26.ko:
- Uninstallation
- Deleting from: /lib/modules/2.6.16.54-0.2.5-bigsmp/kernel/drivers/bloc k
- Original module
- No original module was found for this module on this kernel.
- Use the dkms install command to reinstall any previous module version.


snumbd26.ko:
- Uninstallation
- Deleting from: /lib/modules/2.6.16.54-0.2.5-bigsmp/kernel/drivers/block

- Original module
- No original module was found for this module on this kernel.
- Use the dkms install command to reinstall any previous module version.


DKMS: uninstall Completed.

Launching '/usr/sbin/dkms install -m snapapi26 -v 0.7.29 2>&1'.
Running module version sanity check.

snapapi26.ko:
- Original module
- No original module exists within this kernel
- Installation
- Installing to /lib/modules/2.6.16.54-0.2.5-bigsmp/kernel/drivers/bloc k

snumbd26.ko:
- Original module
- No original module exists within this kernel
- Installation
- Installing to /lib/modules/2.6.16.54-0.2.5-bigsmp/kernel/drivers/block

Adding any weak-modules

depmod.....

DKMS: install Completed.

Data file gui_config.german not found
Data file gui_config.german not found
glibc version is: 2.4

Detected mdk10: 0x0000

Detected mdk10: 0x0000

Detected mdk: 0x0000

Detected mdk: 0x0000

Detected deb: 0x0000

Detected deb: 0x0000

Detected suse80: 0x0000

Detected suse80: 0x0000

Detected suse91: 0x0000

Detected suse92: 0x0000

Detected suse93: 0x0000

Detected fc4: 0x0000

Detected fc5: 0x0000

Detected virtuozzo: 0x0000

Detected virtuozzo: 0x0000

Detected esx25: 0x0000

Detected esx25: 0x0000

Detected esx3: 0x0000

Detected esx3: 0x0000

glibc version is: 2.4

glibc version is: 2.4

glibc version is: 2.4

glibc version is: 2.4

glibc version is: 2.4

glibc version is: 2.4

Running 'rpm -U --percent --force --nodeps /tmp/RPMS.K5ilwF/dkms-2.0.16-2.noarch.rpm':
finished with exit code 0
Running 'rpm -U --percent --force --nodeps /tmp/RPMS.K5ilwF/snapapi26_modules-0.7.42-1.noarch.rpm':
ERROR: Module snapapi26 does not exist in /proc/modules
ERROR: Module snumbd26 does not exist in /proc/modules

Uninstall Beginning --------
Module: snapapi26
Version: 0.7.29
Kernel: 2.6.16.54-0.2.5-bigsmp (i586)
Status: Before uninstall, this module version was ACTIVE on this kernel.
Removing any linked weak-modules

snapapi26.ko:
- Uninstallation
- Deleting from: /lib/modules/2.6.16.54-0.2.5-bigsmp/kernel/drivers/bloc k
- Original module
- No original module was found for this module on this kernel.
- Use the dkms install command to reinstall any previous module version.


snumbd26.ko:
- Uninstallation
- Deleting from: /lib/modules/2.6.16.54-0.2.5-bigsmp/kernel/drivers/block

- Original module
- No original module was found for this module on this kernel.
- Use the dkms install command to reinstall any previous module version.


DKMS: uninstall Completed.

Deleting module version: 0.7.29
completely from the DKMS tree.
Done.
finished with exit code 0
Running 'rpm -U --percent --force --nodeps /tmp/RPMS.K5ilwF/acronis-glibc-1.0-0.noarch.rpm':
finished with exit code 0
Running 'rpm -U --percent --force --nodeps /tmp/RPMS.K5ilwF/MediaBuilder-9.7.8203.5-1.i386.rpm':
finished with exit code 0
glibc version is: 2.4

Running 'rpm -e trueimage':
error: package trueimage is not installed
finished with exit code 256
Running 'rpm -U --percent --force --nodeps /tmp/RPMS.K5ilwF/TrueImageClient-9.7.8203.5-1.i386.rpm':
ln: creating symbolic link `/root/Desktop/TrueImage.desktop' to `/usr/lib/Acronis/TrueImageEchoServer/TrueImage.desktop': No such file or directory
finished with exit code 0
glibc version is: 2.4

glibc version is: 2.4

glibc version is: 2.4

glibc version is: 2.4

Launching '/usr/sbin/dkms install -m snapapi26 -v 0.7.42 2>&1'.

Error! DKMS tree does not contain: snapapi26-0.7.42
Build cannot continue without the proper tree.

Launching '/usr/sbin/dkms ldtarball --force --archive /usr/lib/Acronis/kernel_modules/snapapi26-0.7.42-all.tar.gz 2>&1'.

Warning! This tarball was created with dkms < 2.0 and contains
no arch info. DKMS will assume the arch: i586

Loading tarball for module: snapapi26 / version: 0.7.42

Loading /usr/src/snapapi26-0.7.42...
Creating /var/lib/dkms/snapapi26/0.7.42/source symlink...

DKMS: ldtarball Completed.

Launching '/usr/sbin/dkms install -m snapapi26 -v 0.7.42 2>&1'.

Error! Could not locate snapapi26.ko for module snapapi26 in the DKMS tree.
You must run a dkms build for kernel 2.6.16.54-0.2.5-bigsmp (i586) first.

- snapapi kernel module load failed.

glibc version is: 2.4

glibc version is: 2.4

Data file gui_config.german not found
Data file gui_config.german not found
glibc version is: 2.4

Detected mdk10: 0x0000

Detected mdk10: 0x0000

Detected mdk: 0x0000

Detected mdk: 0x0000

Detected deb: 0x0000

Detected deb: 0x0000

Detected suse80: 0x0000

Detected suse80: 0x0000

Detected suse91: 0x0000

Detected suse92: 0x0000

Detected suse93: 0x0000

Detected fc4: 0x0000

Detected fc5: 0x0000

Detected virtuozzo: 0x0000

Detected virtuozzo: 0x0000

Detected esx25: 0x0000

Detected esx25: 0x0000

Detected esx3: 0x0000

Detected esx3: 0x0000

glibc version is: 2.4

glibc version is: 2.4

glibc version is: 2.4

glibc version is: 2.4

glibc version is: 2.4

glibc version is: 2.4

Running 'rpm -U --percent --force --nodeps /tmp/RPMS.K4C2uU/dkms-2.0.16-2.noarch.rpm':
finished with exit code 0
Running 'rpm -U --percent --force --nodeps /tmp/RPMS.K4C2uU/snapapi26_modules-0.7.42-1.noarch.rpm':
finished with exit code 0
Running 'rpm -U --percent --force --nodeps /tmp/RPMS.K4C2uU/acronis-glibc-1.0-0.noarch.rpm':
finished with exit code 0
Running 'rpm -U --percent --force --nodeps /tmp/RPMS.K4C2uU/MediaBuilder-9.7.8203.5-1.i386.rpm':
finished with exit code 0
glibc version is: 2.4

Running 'rpm -e trueimage':
error: package trueimage is not installed
finished with exit code 256
Running 'rpm -U --percent --force --nodeps /tmp/RPMS.K4C2uU/TrueImageClient-9.7.8203.5-1.i386.rpm':
ln: creating symbolic link `/root/Desktop/TrueImage.desktop' to `/usr/lib/Acronis/TrueImageEchoServer/TrueImage.desktop': No such file or directory
finished with exit code 0
glibc version is: 2.4

glibc version is: 2.4

glibc version is: 2.4

glibc version is: 2.4

Launching '/usr/sbin/dkms install -m snapapi26 -v 0.7.42 2>&1'.

Error! Could not locate snapapi26.ko for module snapapi26 in the DKMS tree.
You must run a dkms build for kernel 2.6.16.54-0.2.5-bigsmp (i586) first.

- snapapi kernel module load failed.

glibc version is: 2.4

glibc version is: 2.4

Data file gui_config.german not found
Data file gui_config.german not found
glibc version is: 2.4

Detected mdk10: 0x0000

Detected mdk10: 0x0000

Detected mdk: 0x0000

Detected mdk: 0x0000

Detected deb: 0x0000

Detected deb: 0x0000

Detected suse80: 0x0000

Detected suse80: 0x0000

Detected suse91: 0x0000

Detected suse92: 0x0000

Detected suse93: 0x0000

Detected fc4: 0x0000

Detected fc5: 0x0000

Detected virtuozzo: 0x0000

Detected virtuozzo: 0x0000

Detected esx25: 0x0000

Detected esx25: 0x0000

Detected esx3: 0x0000

Detected esx3: 0x0000

glibc version is: 2.4

glibc version is: 2.4

glibc version is: 2.4

glibc version is: 2.4

glibc version is: 2.4

glibc version is: 2.4

Running 'rpm -U --percent --force --nodeps /tmp/RPMS.3kSTzr/dkms-2.0.16-2.noarch.rpm':
finished with exit code 0
Running 'rpm -U --percent --force --nodeps /tmp/RPMS.3kSTzr/snapapi26_modules-0.7.42-1.noarch.rpm':
finished with exit code 0
Running 'rpm -U --percent --force --nodeps /tmp/RPMS.3kSTzr/acronis-glibc-1.0-0.noarch.rpm':
finished with exit code 0
Running 'rpm -U --percent --force --nodeps /tmp/RPMS.3kSTzr/MediaBuilder-9.7.8203.5-1.i386.rpm':
finished with exit code 0
glibc version is: 2.4

Running 'rpm -e trueimage':
error: package trueimage is not installed
finished with exit code 256
Running 'rpm -U --percent --force --nodeps /tmp/RPMS.3kSTzr/TrueImageClient-9.7.8203.5-1.i386.rpm':
finished with exit code 0
glibc version is: 2.4

glibc version is: 2.4

glibc version is: 2.4

glibc version is: 2.4

Launching '/usr/sbin/dkms install -m snapapi26 -v 0.7.42 2>&1'.

Error! Could not locate snapapi26.ko for module snapapi26 in the DKMS tree.
You must run a dkms build for kernel 2.6.16.54-0.2.5-bigsmp (i586) first.


Preparing kernel 2.6.16.54-0.2.5-bigsmp for module build:
(This is not compiling a kernel, just preparing kernel symbols)
Storing current .config to be restored when complete
using presented .config
make oldconfig.....
make prepare-all....

Building module:
cleaning build area....
make KERNELRELEASE=2.6.16.54-0.2.5-bigsmp -C /lib/modules/2.6.16.54-0.2.5-bigsmp/build SUBDIRS=/var/lib/dkms/snapapi26/0.7.42/build modules.....(bad exit status: 2)

Error! Bad return status for module build on kernel: 2.6.16.54-0.2.5-bigsmp (i586)
Consult the make.log in the build directory
/var/lib/dkms/snapapi26/0.7.42/build/ for more information.
exited with status 10.
Das Setup von Acronis True Imagec
glibc version is: 2.4

Detected mdk10: 0x0000

Detected mdk10: 0x0000

Detected mdk: 0x0000

Detected mdk: 0x0000

Detected deb: 0x0000

Detected deb: 0x0000

Detected suse80: 0x0000

Detected suse80: 0x0000

Detected suse91: 0x0000

Detected suse92: 0x0000

Detected suse93: 0x0000

Detected fc4: 0x0000

Detected fc5: 0x0000

Detected virtuozzo: 0x0000

Detected virtuozzo: 0x0000

Detected esx25: 0x0000

Detected esx25: 0x0000

Detected esx3: 0x0000

Detected esx3: 0x0000

glibc version is: 2.4

glibc version is: 2.4

glibc version is: 2.4

glibc version is: 2.4

glibc version is: 2.4

glibc version is: 2.4

Running 'rpm -U --percent --force --nodeps /tmp/RPMS.7Vlu5j/dkms-2.0.16-2.noarch.rpm':
finished with exit code 0
Running 'rpm -U --percent --force --nodeps /tmp/RPMS.7Vlu5j/snapapi26_modules-0.7.42-1.noarch.rpm':
finished with exit code 0
Running 'rpm -U --percent --force --nodeps /tmp/RPMS.7Vlu5j/acronis-glibc-1.0-0.noarch.rpm':
finished with exit code 0
Running 'rpm -U --percent --force --nodeps /tmp/RPMS.7Vlu5j/MediaBuilder-9.7.8203.5-1.i386.rpm':
finished with exit code 0
glibc version is: 2.4

Running 'rpm -e trueimage':
error: package trueimage is not installed
finished with exit code 256
Running 'rpm -U --percent --force --nodeps /tmp/RPMS.7Vlu5j/TrueImageClient-9.7.8203.5-1.i386.rpm':
finished with exit code 0
glibc version is: 2.4

glibc version is: 2.4

glibc version is: 2.4

glibc version is: 2.4

Launching '/usr/sbin/dkms install -m snapapi26 -v 0.7.42 2>&1'.

Error! This module/version combo is already installed
for kernel: 2.6.16.54-0.2.5-bigsmp (i586)

Launching '/usr/sbin/dkms uninstall -m snapapi26 -v 0.7.42 2>&1'.

Uninstall Beginning --------
Module: snapapi26
Version: 0.7.42
Kernel: 2.6.16.54-0.2.5-bigsmp (i586)
Status: Before uninstall, this module version was ACTIVE on this kernel.
Removing any linked weak-modules

snapapi26.ko:
- Uninstallation
- Deleting from: /lib/modules/2.6.16.54-0.2.5-bigsmp/kernel/drivers/bloc k
- Original module
- No original module was found for this module on this kernel.
- Use the dkms install command to reinstall any previous module version.

snumbd26.ko:
- Uninstallation
- Deleting from: /lib/modules/2.6.16.54-0.2.5-bigsmp/kernel/drivers/block

- Original module
- No original module was found for this module on this kernel.
- Use the dkms install command to reinstall any previous module version.


DKMS: uninstall Completed.

Launching '/usr/sbin/dkms install -m snapapi26 -v 0.7.42 2>&1'.
Running module version sanity check.

snapapi26.ko:
- Original module
- No original module exists within this kernel
- Installation
- Installing to /lib/modules/2.6.16.54-0.2.5-bigsmp/kernel/drivers/bloc k

snumbd26.ko:
- Original module
- No original module exists within this kernel
- Installation
- Installing to /lib/modules/2.6.16.54-0.2.5-bigsmp/kernel/drivers/block

Adding any weak-modules
WARNING: /lib/modules/2.6.16.54-0.2.5-default/weak-updates/lib/modules/2.6.16.54-0.2.5-bigsmp/kernel/drivers/block/snapapi26.ko needs unknown symbol _spin_lock_bh
WARNING: /lib/modules/2.6.16.54-0.2.5-default/weak-updates/lib/modules/2.6.16.54-0.2.5-bigsmp/kernel/drivers/block/snapapi26.ko needs unknown symbol _spin_unlock_bh
WARNING: /lib/modules/2.6.16.54-0.2.5-default/weak-updates/lib/modules/2.6.16.54-0.2.5-bigsmp/kernel/drivers/block/snapapi26.ko needs unknown symbol unlock_kernel
WARNING: /lib/modules/2.6.16.54-0.2.5-default/weak-updates/lib/modules/2.6.16.54-0.2.5-bigsmp/kernel/drivers/block/snapapi26.ko needs unknown symbol cpu_possible_map
WARNING: /lib/modules/2.6.16.54-0.2.5-default/weak-updates/lib/modules/2.6.16.54-0.2.5-bigsmp/kernel/drivers/block/snapapi26.ko needs unknown symbol _spin_unlock_irqrestore
WARNING: /lib/modules/2.6.16.54-0.2.5-default/weak-updates/lib/modules/2.6.16.54-0.2.5-bigsmp/kernel/drivers/block/snapapi26.ko needs unknown symbol lock_kernel
WARNING: /lib/modules/2.6.16.54-0.2.5-default/weak-updates/lib/modules/2.6.16.54-0.2.5-bigsmp/kernel/drivers/block/snapapi26.ko needs unknown symbol _spin_lock_irq
WARNING: /lib/modules/2.6.16.54-0.2.5-default/weak-updates/lib/modules/2.6.16.54-0.2.5-bigsmp/kernel/drivers/block/snapapi26.ko needs unknown symbol del_timer_sync
WARNING: /lib/modules/2.6.16.54-0.2.5-default/weak-updates/lib/modules/2.6.16.54-0.2.5-bigsmp/kernel/drivers/block/snapapi26.ko needs unknown symbol _spin_lock_irqsave
WARNING: /lib/modules/2.6.16.54-0.2.5-default/weak-updates/lib/modules/2.6.16.54-0.2.5-bigsmp/kernel/drivers/block/snapapi26.ko needs unknown symbol _spin_lock
WARNING: /lib/modules/2.6.16.54-0.2.5-default/weak-updates/lib/modules/2.6.16.54-0.2.5-bigsmp/kernel/drivers/block/snumbd26.ko needs unknown symbol _spin_unlock_irqrestore
WARNING: /lib/modules/2.6.16.54-0.2.5-default/weak-updates/lib/modules/2.6.16.54-0.2.5-bigsmp/kernel/drivers/block/snumbd26.ko needs unknown symbol _spin_lock_irq
WARNING: /lib/modules/2.6.16.54-0.2.5-default/weak-updates/lib/modules/2.6.16.54-0.2.5-bigsmp/kernel/drivers/block/snumbd26.ko needs unknown symbol del_timer_sync
WARNING: /lib/modules/2.6.16.54-0.2.5-default/weak-updates/lib/modules/2.6.16.54-0.2.5-bigsmp/kernel/drivers/block/snumbd26.ko needs unknown symbol _spin_lock_irqsave
WARNING: /lib/modules/2.6.16.54-0.2.5-default/weak-updates/lib/modules/2.6.16.54-0.2.5-bigsmp/kernel/drivers/block/snumbd26.ko needs unknown symbol _spin_lock

depmod.....

DKMS: install Completed.

glibc version is: 2.4

glibc version is: 2.4

Data file gui_config.german not found
Data file gui_config.german not found
glibc version is: 2.4

Detected mdk10: 0x0000

Detected mdk10: 0x0000

Detected mdk: 0x0000

Detected mdk: 0x0000

Detected deb: 0x0000

Detected deb: 0x0000

Detected suse80: 0x0000

Detected suse80: 0x0000

Detected suse91: 0x0000

Detected suse92: 0x0000

Detected suse93: 0x0000

Detected fc4: 0x0000

Detected fc5: 0x0000

Detected virtuozzo: 0x0000

Detected virtuozzo: 0x0000

Detected esx25: 0x0000

Detected esx25: 0x0000

Detected esx3: 0x0000

Detected esx3: 0x0000

glibc version is: 2.4

glibc version is: 2.4

glibc version is: 2.4

glibc version is: 2.4

glibc version is: 2.4

glibc version is: 2.4

Running 'rpm -U --percent --force --nodeps /tmp/RPMS.iGnrT4/dkms-2.0.16-2.noarch.rpm':
finished with exit code 0
Running 'rpm -U --percent --force --nodeps /tmp/RPMS.iGnrT4/snapapi26_modules-0.7.42-1.noarch.rpm':
finished with exit code 0
Running 'rpm -U --percent --force --nodeps /tmp/RPMS.iGnrT4/acronis-glibc-1.0-0.noarch.rpm':
finished with exit code 0
Running 'rpm -U --percent --force --nodeps /tmp/RPMS.iGnrT4/MediaBuilder-9.7.8203.5-1.i386.rpm':
finished with exit code 0
glibc version is: 2.4

Running 'rpm -e trueimage':
error: package trueimage is not installed
finished with exit code 256
Running 'rpm -U --percent --force --nodeps /tmp/RPMS.iGnrT4/TrueImageClient-9.7.8203.5-1.i386.rpm':
finished with exit code 0
glibc version is: 2.4

glibc version is: 2.4

glibc version is: 2.4

glibc version is: 2.4

Launching '/usr/sbin/dkms install -m snapapi26 -v 0.7.42 2>&1'.

Error! DKMS tree does not contain: snapapi26-0.7.42
Build cannot continue without the proper tree.

Launching '/usr/sbin/dkms ldtarball --force --archive /usr/lib/Acronis/kernel_modules/snapapi26-0.7.42-all.tar.gz 2>&1'.

Warning! This tarball was created with dkms < 2.0 and contains
no arch info. DKMS will assume the arch: i586

Loading tarball for module: snapapi26 / version: 0.7.42

Loading /usr/src/snapapi26-0.7.42...
Creating /var/lib/dkms/snapapi26/0.7.42/source symlink...

DKMS: ldtarball Completed.

Launching '/usr/sbin/dkms install -m snapapi26 -v 0.7.42 2>&1'.

Error! Could not locate snapapi26.ko for module snapapi26 in the DKMS tree.
You must run a dkms build for kernel 2.6.16.54-0.2.5-bigsmp (i586) first.


Preparing kernel 2.6.16.54-0.2.5-bigsmp for module build:
(This is not compiling a kernel, just preparing kernel symbols)
Storing current .config to be restored when complete
using presented .config
make oldconfig.....
make prepare-all....

Building module:
cleaning build area....
make KERNELRELEASE=2.6.16.54-0.2.5-bigsmp -C /lib/modules/2.6.16.54-0.2.5-bigsmp/build SUBDIRS=/var/lib/dkms/snapapi26/0.7.42/build modules.....(bad exit status: 2)

Error! Bad return status for module build on kernel: 2.6.16.54-0.2.5-bigsmp (i586)
Consult the make.log in the build directory
/var/lib/dkms/snapapi26/0.7.42/build/ for more information.
exited with status 10.
Das Setup von Acronis True ImageØPP·<
glibc version is: 2.4

Detected mdk10: 0x0000

Detected mdk10: 0x0000

Detected mdk: 0x0000

Detected mdk: 0x0000

Detected deb: 0x0000

Detected deb: 0x0000

Detected suse80: 0x0000

Detected suse80: 0x0000

Detected suse91: 0x0000

Detected suse92: 0x0000

Detected suse93: 0x0000

Detected fc4: 0x0000

Detected fc5: 0x0000

Detected virtuozzo: 0x0000

Detected virtuozzo: 0x0000

Detected esx25: 0x0000

Detected esx25: 0x0000

Detected esx3: 0x0000

Detected esx3: 0x0000

glibc version is: 2.4

glibc version is: 2.4

glibc version is: 2.4

glibc version is: 2.4

glibc version is: 2.4

glibc version is: 2.4

Running 'rpm -U --percent --force --nodeps /tmp/RPMS.McCTPw/dkms-2.0.16-2.noarch.rpm':
finished with exit code 0
Running 'rpm -U --percent --force --nodeps /tmp/RPMS.McCTPw/snapapi26_modules-0.7.42-1.noarch.rpm':
finished with exit code 0
Running 'rpm -U --percent --force --nodeps /tmp/RPMS.McCTPw/acronis-glibc-1.0-0.noarch.rpm':
finished with exit code 0
Running 'rpm -U --percent --force --nodeps /tmp/RPMS.McCTPw/MediaBuilder-9.7.8203.5-1.i386.rpm':
finished with exit code 0
glibc version is: 2.4

Running 'rpm -e trueimage':
error: package trueimage is not installed
finished with exit code 256
Running 'rpm -U --percent --force --nodeps /tmp/RPMS.McCTPw/TrueImageClient-9.7.8203.5-1.i386.rpm':
finished with exit code 0
glibc version is: 2.4

glibc version is: 2.4

glibc version is: 2.4

glibc version is: 2.4

Launching '/usr/sbin/dkms install -m snapapi26 -v 0.7.42 2>&1'.

Error! Could not locate snapapi26.ko for module snapapi26 in the DKMS tree.
You must run a dkms build for kernel 2.6.16.54-0.2.5-bigsmp (i586) first.


Preparing kernel 2.6.16.54-0.2.5-bigsmp for module build:
(This is not compiling a kernel, just preparing kernel symbols)
Storing current .config to be restored when complete
using presented .config
make oldconfig.....
make prepare-all....

Building module:
cleaning build area....
make KERNELRELEASE=2.6.16.54-0.2.5-bigsmp -C /lib/modules/2.6.16.54-0.2.5-bigsmp/build SUBDIRS=/var/lib/dkms/snapapi26/0.7.42/build modules.....(bad exit status: 2)

Error! Bad return status for module build on kernel: 2.6.16.54-0.2.5-bigsmp (i586)
Consult the make.log in the build directory
/var/lib/dkms/snapapi26/0.7.42/build/ for more information.
exited with status 10.
Das Setup von Acronis True Image


_________
make.log
_________
DKMS make.log for snapapi26-0.7.42 for kernel 2.6.16.54-0.2.5-bigsmp (i586)
Fri Mar 27 10:55:35 CET 2009
make: Entering directory `/usr/src/linux-2.6.16.54-0.2.5-obj/i386/bigsmp'
make -C /usr/src/linux-2.6.16.54-0.2.5 O=/usr/src/linux-2.6.16.54-0.2.5-obj/i386/bigsmp modules
CC [M] /var/lib/dkms/snapapi26/0.7.42/build/snapapi26.o
CC [M] /var/lib/dkms/snapapi26/0.7.42/build/snumbd26.o
Building modules, stage 2.
MODPOST
/bin/sh: scripts/mod/modpost: No such file or directory
make[3]: * [__modpost] Error 127
make[2]:
* [modules] Error 2
make[1]: * [modules] Error 2
make:
* [modules] Error 2
make: Leaving directory `/usr/src/linux-2.6.16.54-0.2.5-obj/i386/bigsmp'
Ähnliche Inhalte
Backup
Acronis True Image startet nicht
Frage von MazenauerBackup3 Kommentare

Guten Tag zusammen, Ich habe ein sehr merkwürdiges Problem über das ich mir jetzt schon lange den Kopf zerbreche. ...

Windows 10
Acronis True Image: Ein Image für UEFI und Legacy?
Frage von MatsushitaWindows 105 Kommentare

Hallo Forum, kann mit Acronis True Image ein "neutrales" Windows 10 Image erstellt werden, welches sowohl auf einem UEFI- ...

Backup
Sicherung mit Acronis True Images auf RDX
Frage von AkcentBackup8 Kommentare

Hallo, wir haben hier ein System mit einem RDX Laufwerk und Acronis True Images 2014. Es stehen 2 Cartridges ...

Windows Tools
Acronis True Image 2017 + 1TB Cloud Speicher
gelöst Frage von m.reegerWindows Tools8 Kommentare

Hallo zusammen, ich bin in die Verlegenheit gekommen die Software plus 1TB Cloud Speicher für 2 Jahre kostenlos zu ...

Neue Wissensbeiträge
Verschlüsselung & Zertifikate

Die Hölle friert ein weiteres Stück zu: Microsoft integriert OpenSSH in Windows

Information von ticuta1 vor 2 StundenVerschlüsselung & Zertifikate

Interessant SSH-Kommando in CMD.exe und PowerShell

Apple

IOS 11.2.1 stopft HomeKit-Remote-Lücke

Tipp von BassFishFox vor 1 TagApple

Das Update für iPhone, iPad und Apple TV soll die Fernsteuerung von Smart-Home-Geräten wieder in vollem Umfang ermöglichen. Apple ...

Windows 10

Windows 10 v1709 EN murkst bei den Regionseinstellungen

Tipp von DerWoWusste vor 1 TagWindows 10

Dieser kurze Tipp richtet sich an den kleinen Personenkreis, der Win10 v1709 EN-US frisch installiert und dabei die englische ...

Webbrowser

Kein Ton bei Firefox Quantum über RDP

Tipp von Moddry vor 1 TagWebbrowser

Hallo Kollegen! Hatte das Problem, dass der neue Firefox bei mir auf der Kiste keinen Ton hat, wenn ich ...

Heiß diskutierte Inhalte
Windows Server
RODC kann nicht aus Domäne entfernt werden
Frage von NilsvLehnWindows Server19 Kommentare

HAllo, ich arbeite in einem Universitätsnetzwerk mit 3 Standorten. Die Standorte haben alle ein ESXi Cluster und auf diesen ...

Hardware
Kein Bild mit nur einer bestimmten Grafikkarten - Mainboard Konfiguration
gelöst Frage von bestelittHardware18 Kommentare

Hallo zusammen, ich hatte schon einmal eine ähnliche Frage gestellt. Damals hatte ich genau das gleiche Problem. Allerdings lies ...

Netzwerkmanagement
Mehrere Netzwerkadapter in einem PC zu einem Switch zusammenfügen
Frage von prodriveNetzwerkmanagement17 Kommentare

Hallo zusammen Vorweg, ich konnte schon einige IT-Probleme mit Hilfe dieses Forums lösen. Wirklich klasse hier! Doch für das ...

Hardware
Links klick bei Maus funktioniert nicht
gelöst Frage von Pablu23Hardware16 Kommentare

Hallo erstmal. Ich habe ein Problem mit meiner relativ alten maus jedoch denke ich nicht das es an der ...