Top-Themen

AppleEntwicklungHardwareInternetLinuxMicrosoftMultimediaNetzwerkeOff TopicSicherheitSonstige SystemeVirtualisierungWeiterbildungZusammenarbeit

Aktuelle Themen

Administrator.de FeedbackApache ServerAppleAssemblerAudioAusbildungAuslandBackupBasicBatch & ShellBenchmarksBibliotheken & ToolkitsBlogsCloud-DiensteClusterCMSCPU, RAM, MainboardsCSSC und C++DatenbankenDatenschutzDebianDigitiales FernsehenDNSDrucker und ScannerDSL, VDSLE-BooksE-BusinessE-MailEntwicklungErkennung und -AbwehrExchange ServerFestplatten, SSD, RaidFirewallFlatratesGoogle AndroidGrafikGrafikkarten & MonitoreGroupwareHardwareHosting & HousingHTMLHumor (lol)Hyper-VIconsIDE & EditorenInformationsdiensteInstallationInstant MessagingInternetInternet DomäneniOSISDN & AnaloganschlüsseiTunesJavaJavaScriptKiXtartKVMLAN, WAN, WirelessLinuxLinux DesktopLinux NetzwerkLinux ToolsLinux UserverwaltungLizenzierungMac OS XMicrosoftMicrosoft OfficeMikroTik RouterOSMonitoringMultimediaMultimedia & ZubehörNetzwerkeNetzwerkgrundlagenNetzwerkmanagementNetzwerkprotokolleNotebook & ZubehörNovell NetwareOff TopicOpenOffice, LibreOfficeOutlook & MailPapierkorbPascal und DelphiPeripheriegerätePerlPHPPythonRechtliche FragenRedHat, CentOS, FedoraRouter & RoutingSambaSAN, NAS, DASSchriftartenSchulung & TrainingSEOServerServer-HardwareSicherheitSicherheits-ToolsSicherheitsgrundlagenSolarisSonstige SystemeSoziale NetzwerkeSpeicherkartenStudentenjobs & PraktikumSuche ProjektpartnerSuseSwitche und HubsTipps & TricksTK-Netze & GeräteUbuntuUMTS, EDGE & GPRSUtilitiesVB for ApplicationsVerschlüsselung & ZertifikateVideo & StreamingViren und TrojanerVirtualisierungVisual StudioVmwareVoice over IPWebbrowserWebentwicklungWeiterbildungWindows 7Windows 8Windows 10Windows InstallationWindows MobileWindows NetzwerkWindows ServerWindows SystemdateienWindows ToolsWindows UpdateWindows UserverwaltungWindows VistaWindows XPXenserverXMLZusammenarbeit

Bluescreen XP SP2 MACHINE CHECK EXCEPTION

Frage Microsoft Windows Systemdateien

Mitglied: tantehorst1980

tantehorst1980 (Level 1) - Jetzt verbinden

30.12.2008, aktualisiert 12:18 Uhr, 6678 Aufrufe

Hallo..

habe seit kurzem ständig Bluescreens auf meinem Zweitrechner. Ich habe mal mit dem Windows Debugging Tool den Crashdump ausgelsen. Ich würde gerne mal Eure Meinung und Einschätzung dazu hören. Ich habe auf diversen Seiten gelesen, dass der Bluescreen mit der Meldung MACHINE_CHECK_EXCEPTION viele Ursachen haben kann ( Überhitzung, defekter BUS-Treiber, etc.). Wenn ich das ausgelesene Dumpfile richtig verstehe wird die Datei ntoskernel.exe dafür verantwortlich gemacht. Hat einer eventuell ne Idee die Problemursache weiter einzugrenzen?

Schon mal vielen Dank!

Loading Dump File [D:\Dokumente und Einstellungen\Administrator\Desktop\Mini122408-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: M:\Programme\Debugging Tools for Windows (x86)\Symbols
Executable search path is:
Unable to load image ntoskrnl.exe, Win32 error 0n2
* WARNING: Unable to verify timestamp for ntoskrnl.exe
Windows XP Kernel Version 2600 (Service Pack 2) UP Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Machine Name:
Kernel base = 0x804d7000 PsLoadedModuleList = 0x805531a0
Debug session time: Wed Dec 24 15:05:47.843 2008 (GMT+1)
System Uptime: 0 days 0:09:22.438
Unable to load image ntoskrnl.exe, Win32 error 0n2
* WARNING: Unable to verify timestamp for ntoskrnl.exe
Loading Kernel Symbols
.................................................. .............
.................................................. ............
Loading User Symbols
Loading unloaded module list
............
* WARNING: Unable to verify timestamp for hal.dll
*
  • *
  • Bugcheck Analysis *
  • *
*

Use !analyze -v to get detailed debugging information.

BugCheck 9C, {4, 80545ff0, b2000000, 70f0f}

Probably caused by : ntoskrnl.exe ( nt!FsRtlRemoveMcbEntryPrivate+68 )

Followup: MachineOwner
kd> !analyze -v
*
  • *
  • Bugcheck Analysis *
  • *
***

MACHINE_CHECK_EXCEPTION (9c)
A fatal Machine Check Exception has occurred.
KeBugCheckEx parameters;
x86 Processors
If the processor has ONLY MCE feature available (For example Intel
Pentium), the parameters are:
1 - Low 32 bits of P5_MC_TYPE MSR
2 - Address of MCA_EXCEPTION structure
3 - High 32 bits of P5_MC_ADDR MSR
4 - Low 32 bits of P5_MC_ADDR MSR
If the processor also has MCA feature available (For example Intel
Pentium Pro), the parameters are:
1 - Bank number
2 - Address of MCA_EXCEPTION structure
3 - High 32 bits of MCi_STATUS MSR for the MCA bank that had the error
4 - Low 32 bits of MCi_STATUS MSR for the MCA bank that had the error
IA64 Processors
1 - Bugcheck Type
1 - MCA_ASSERT
2 - MCA_GET_STATEINFO
SAL returned an error for SAL_GET_STATEINFO while processing MCA.
3 - MCA_CLEAR_STATEINFO
SAL returned an error for SAL_CLEAR_STATEINFO while processing MCA.
4 - MCA_FATAL
FW reported a fatal MCA.
5 - MCA_NONFATAL
SAL reported a recoverable MCA and we don't support currently
support recovery or SAL generated an MCA and then couldn't
produce an error record.
0xB - INIT_ASSERT
0xC - INIT_GET_STATEINFO
SAL returned an error for SAL_GET_STATEINFO while processing INIT event.
0xD - INIT_CLEAR_STATEINFO
SAL returned an error for SAL_CLEAR_STATEINFO while processing INIT event.
0xE - INIT_FATAL
Not used.
2 - Address of log
3 - Size of log
4 - Error code in the case of x_GET_STATEINFO or x_CLEAR_STATEINFO
AMD64 Processors
1 - Bank number
2 - Address of MCA_EXCEPTION structure
3 - High 32 bits of MCi_STATUS MSR for the MCA bank that had the error
4 - Low 32 bits of MCi_STATUS MSR for the MCA bank that had the error
Arguments:
Arg1: 00000004
Arg2: 80545ff0
Arg3: b2000000
Arg4: 00070f0f

Debugging Details:
NOTE: This is a hardware error. This error was reported by the CPU
via Interrupt 18. This analysis will provide more information about
the specific error. Please contact the manufacturer for additional
information about this error and troubleshooting assistance.

This error is documented in the following publication:

- Bios and Kernel Developers Guid for AMD Athlon(r) 64 and AMD Opteron(r) Processors
Bit Mask:

MA Model Specific MCA
O ID Other Information Error Code Error Code
VV SDP ___________|____________ _______|_______ _______|______
AEUECRC| | | |
LRCNVVC| | | |
^^^| | | |
6 5 4 3 2 1
32109876543210987654321098765432109876543210987654 32109876543210
10110010000000000000000000000000000000000000011100 00111100001111


VAL - MCi_STATUS register is valid
Indicates that the information contained within the IA32_MCi_STATUS
register is valid. When this flag is set, the processor follows the
rules given for the OVER flag in the IA32_MCi_STATUS register when
overwriting previously valid entries. The processor sets the VAL
flag and software is responsible for clearing it.

UC - Error Uncorrected
Indicates that the processor did not or was not able to correct the
error condition. When clear, this flag indicates that the processor
was able to correct the error condition.

EN - Error Enabled
Indicates that the error was enabled by the associated EEj bit of the
IA32_MCi_CTL register.

PCC - Processor Context Corrupt
Indicates that the state of the processor might have been corrupted
by the error condition detected and that reliable restarting of the
processor may not be possible.

BUSCONNERR - Bus and Interconnect Error BUS{LL}_{PP}_{RRRR}_{II}_{T}_err
These errors match the format 0000 1PPT RRRR IILL



Concatenated Error Code:
_VAL_UC_EN_PCC_BUSCONNERR_30F

This error code can be reported back to the manufacturer.
They may be able to provide additional information based upon
this error. All questions regarding STOP 0x9C should be
directed to the hardware manufacturer.

BUGCHECK_STR: 0x9C_AuthenticAMD

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: DRIVER_FAULT

PROCESS_NAME: Idle

LAST_CONTROL_TRANSFER: from 806d38df to 804f8925

STACK_TEXT:
80545fc8 806d38df 0000009c 00000004 80545ff0 nt!FsRtlRemoveMcbEntryPrivate+0x68
80545fc8 00000000 0000009c 00000004 80545ff0 hal!HalpGetFeatureBits+0x75


STACK_COMMAND: kb

FOLLOWUP_IP:
nt!FsRtlRemoveMcbEntryPrivate+68
804f8925 5d pop ebp

SYMBOL_STACK_INDEX: 0

SYMBOL_NAME: nt!FsRtlRemoveMcbEntryPrivate+68

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: nt

IMAGE_NAME: ntoskrnl.exe

DEBUG_FLR_IMAGE_TIMESTAMP: 41107b0c

FAILURE_BUCKET_ID: 0x9C_AuthenticAMD_nt!FsRtlRemoveMcbEntryPrivate+68

BUCKET_ID: 0x9C_AuthenticAMD_nt!FsRtlRemoveMcbEntryPrivate+68

Followup: MachineOwner
Neuester Wissensbeitrag
Windows 10

Powershell 5 BSOD

(8)

Tipp von agowa338 zum Thema Windows 10 ...

Ähnliche Inhalte
Windows 7
Windows 7 rechner fährt nicht mehr hoch - bluescreen (10)

Frage von jensgebken zum Thema Windows 7 ...

Windows 10
Brauche Hilfe bei BlueScreen Auswertung! (10)

Frage von SgtBurner zum Thema Windows 10 ...

Windows 10
gelöst Bluescreen Memory Management (4)

Frage von achklein zum Thema Windows 10 ...

Heiß diskutierte Inhalte
Microsoft
Ordner mit LW-Buchstaben versehen und benennen (20)

Frage von Xaero1982 zum Thema Microsoft ...

Outlook & Mail
gelöst Outlook 2010 findet ost datei nicht (19)

Frage von Floh21 zum Thema Outlook & Mail ...

Netzwerkmanagement
gelöst Anregungen, kleiner Betrieb, IT-Umgebung (18)

Frage von Unwichtig zum Thema Netzwerkmanagement ...

Festplatten, SSD, Raid
M.2 SSD wird nicht erkannt (14)

Frage von uridium69 zum Thema Festplatten, SSD, Raid ...