sirus
Goto Top

cisco PIX 501 Version 6.2

Hallo zusammen ich sitze gerade vor einer Cisco PIX 501. Ich will sie neu konfigurieren und hab sie erst einmal reseted.


16626bffd233f4f7c64030d531a4629e-cisco

Auf dem Client 1 läuft ein FTP Server auf Port 3333. Der Clinet 2 soll auf diesem Port zugreiffen, sonnst soll alles gesperrt werden. Da es bei mir nur zum konfigurieren von routen recht bitte ich um eure hilfe

Konfig:

PIX Version 6.2(2)
nameif ethernet0 outside security0
nameif ethernet1 inside security100
hostname PIX
domain-name heimnetz
fixup protocol ftp 21
fixup protocol http 80
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol ils 389
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol sip 5060
fixup protocol skinny 2000
names
pager lines 24
interface ethernet0 10baset
interface ethernet1 10full
mtu outside 1500
mtu inside 1500
ip address outside 192.168.1.1 255.255.255.0
ip address inside 192.168.0.1 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
pdm history enable
arp timeout 14400
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h323 0:05:00 si
p 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol local
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
no sysopt route dnat
telnet timeout 5
ssh timeout 5
terminal width 80
: end

Content-Key: 65651

Url: https://administrator.de/contentid/65651

Ausgedruckt am: 28.03.2024 um 18:03 Uhr

Mitglied: aqui
aqui 07.08.2007 um 17:13:21 Uhr
Goto Top
Beispiele findest du zuhauf hier:

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/prod_configuratio ...

Es fehlt sowas wie access-list outin permit tcp any any eq ftp in deiner Konfig.