Druckerport erstellt, erscheint aber leider erst nach reboot...
Habe über die Registry einen Druckerport erstellt.
Folgender Eintrag in der Registry:
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors\Standard TCP/IP Port\Ports\IP_192.168.10.66]
"HostName"=""
"HWAddress"=""
"IPAddress"="192.168.10.66]"
"PortNumber"=dword:0000238c
"Protocol"=dword:00000001
"SNMP Community"="public"
"SNMP Enabled"=dword:00000001
"SNMP Index"=dword:00000001
"Version"=dword:00000001
Das klappt eigentlich alles wunderbar, doch der erstellte TCP/IP Port steht erst nach einem reboot zur Verfügung. Gibt es eine Möglichkeit einen Refresh zu machen, sodass ein reboot nicht nötig ist?
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors\Standard TCP/IP Port\Ports\IP_192.168.10.66]
"HostName"=""
"HWAddress"=""
"IPAddress"="192.168.10.66]"
"PortNumber"=dword:0000238c
"Protocol"=dword:00000001
"SNMP Community"="public"
"SNMP Enabled"=dword:00000001
"SNMP Index"=dword:00000001
"Version"=dword:00000001
Das klappt eigentlich alles wunderbar, doch der erstellte TCP/IP Port steht erst nach einem reboot zur Verfügung. Gibt es eine Möglichkeit einen Refresh zu machen, sodass ein reboot nicht nötig ist?
Please also mark the comments that contributed to the solution of the article
Content-Key: 41528
Url: https://administrator.de/contentid/41528
Printed on: April 24, 2024 at 13:04 o'clock