icewave
Goto Top

Samba 3.5.6 PDC und Win7 wollen einfach nicht!

Trotz sämtlicher Anleitungen und Tips will Win7 einfach nicht mit dem Samba verbinden.

Heyhu face-smile

Ich hab da ein Problem, was ich einfach nicht gelöst bekomme...

Ich habe einen Debian-Sqeeze-Server, auf welchem ich verschiedene Dienste am laufen habe. Darunter auch Samba und BIND9.

Nun habe ich schon länger Dateifreigaben über den Samba erledigt, was auch wunderbar funktionierte, doch trotz aller mühen mag der Win7 Client einfach nicht verbinden.
Es kommt immer die Fehlermeldung "Die angegebene Domäne ist nicht vorhanden, oder es konnte keine Verbindung hergestllt werden."

Hier einmal meine smb.conf
#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
   workgroup = LXPDC

# server string is the equivalent of the NT Description field
   server string = Samba (%h)

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
   wins support = no

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.
   dns proxy = no

# What naming service and in what order should we use to resolve host names
# to IP addresses
;   name resolve order = lmhosts host wins bcast

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
   interfaces = 127.0.0.0/8 eth1

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this. 
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself.  However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
   bind interfaces only = yes



#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
   log file = /var/log/samba/%m.log
   log level = 20

# Cap the size of the individual log files (in KiB).
   max log size = 1000

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'. 
   syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
   syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
   panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# "security = user" is always a good idea. This will require a Unix account 
# in this server for every user accessing the server. See
# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
# in the samba-doc package for details.
   security = user

# You may wish to use password encryption.  See the section on
# 'encrypt passwords' in the smb.conf(5) manpage before enabling. 
   encrypt passwords = true

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using.  
   passdb backend = tdbsam

   obey pam restrictions = yes

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
   unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
   passwd program = /usr/bin/passwd %u
   passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'. 
   pam password change = yes

########## Domains ###########

# Is this machine able to authenticate users. Both PDC and BDC
# must have this setting enabled. If you are the BDC you must
# change the 'domain master' setting to no 
#
   domain logons = yes
#
# The following setting only takes effect if 'domain logons' is set  
# It specifies the location of the user's profile directory  
# from the client point of view)
# The following required a [profiles] share to be setup on the
# samba server (see below)
;   logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory  
# (this is Samba's default)  
   logon path = \\shares.intern\%U\profile

# The following setting only takes effect if 'domain logons' is set  
# It specifies the location of a user's home directory (from the client  
# point of view)
   logon drive = H:
   logon home = \\shares.intern\%U

# The following setting only takes effect if 'domain logons' is set  
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention  
;   logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe.  The example command creates a user account with a disabled Unix
# password; please adapt to your needs
 add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u  

# This allows machine accounts to be created on the domain controller via the 
# SAMR RPC pipe.  
# The following assumes a "machines" group exists on the system  
 add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u  

# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe.  
 add group script = /usr/sbin/addgroup --force-badname %g

########## Printing ##########

# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this  
#   load printers = yes

# lpr(ng) printing. You may wish to override the location of the
# printcap file
;   printing = bsd
;   printcap name = /etc/printcap

# CUPS printing.  See also the cupsaddsmb(8) manpage in the
# cupsys-client package.
;   printing = cups
;   printcap name = cups

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.%m

# Most people will find that this option gives better performance.
# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
# for details
# You may want to add the following on a Linux system:
   SO_RCVBUF=8192 SO_SNDBUF=8192
   socket options = TCP_NODELAY

# The following parameter is useful only if you have the linpopup package
# installed. The samba maintainer and the linpopup maintainer are
# working to ease installation and configuration of linpopup and samba.
;   message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &  

# Domain Master specifies Samba to be the Domain Master Browser. If this
# machine will be configured as a BDC (a secondary logon server), you
# must set this to 'no'; otherwise, the default behavior is recommended.  
   domain master = auto

# Some defaults for winbind (make sure you're not using the ranges  
# for something else.)
   idmap uid = 10000-20000
   idmap gid = 10000-20000
   template shell = /bin/bash

# The following was the default behaviour in sarge,
# but samba upstream reverted the default because it might induce
# performance issues in large organizations.
# See Debian bug #368251 for some of the consequences of *not*
# having this setting and smb.conf(5) for details.
;   winbind enum groups = yes
;   winbind enum users = yes

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 (default) means that usershare is disabled.
   usershare max shares = 100

#======================= Share Definitions =======================

[homes]
	browseable = no
	comment = Home Directories
	valid users = @users
	writeable = yes
	create mode = 0777
	directory mode = 0777
	
[netlogon]
	browseable = no
	comment = Netlogon-Scripts
	writeable = no

#weitere Shares für Dateifreigaben

Ich habe ebenfalls im Win7 Client die Registry-Einträge und Sicherheitsrichtlinien wie in den Tutorials angegeben geändert.

Trotzdem bringt das nichts - ioch finde weder eine Fehlermeldung bei Samba, bei Win7 weiß ich nicht wo ich so etwas finden könnte.


Hatte vielleicht jemand schon einmal dieses Problem oder kann mir helfen?


Liebe Grüße,

icewave

Content-Key: 180091

Url: https://administrator.de/contentid/180091

Ausgedruckt am: 29.03.2024 um 08:03 Uhr

Mitglied: Wombie
Wombie 24.06.2012 um 17:36:30 Uhr
Goto Top
Hi!

Ich stehe aktuell vor dem gleichen Problem.
Konntest du denn mittlerweile eine Lösung dafür finden?

Danke!
Mitglied: holli.zimmi
holli.zimmi 26.05.2015 um 13:58:21 Uhr
Goto Top
Hi,

hast Du User angelegt in Linux?

Gruss

Holli
Mitglied: icewave
icewave 26.05.2015 um 14:54:07 Uhr
Goto Top
Hey,

Ich hab den PDC leider nicht mehr im Betrieb und kann deshalb leider nichts dazu sagen.

Liebe Grüße,

icewave