Ubuntu 11.04 - WLAN lässt sich nach Neustart nicht aktivieren
Moin,
hab gestern Ubuntu 11.04 installiert. Im Anschluss WLAN die '/etc/interfaces' und '/etc/wpa_supplicant/wpa_supplicant.conf' wie folgt eingerichtet:
/etc/interfaces:
/etc/wpa_supplicant/wpa_supplicant.conf:
Im Anschluss WLAN wie folgt aktiviert:
Es erscheint folgende Meldung:
Darauf gebe ich folgenden Befehl ein:
Beim ersten Versuch nach anlegen der wpa_supplicant.conf funktioniert die WLAN-Verbindung einwandfrei. Nach wiederholtem Neustart nicht mehr.
Auch bei ifconfig taucht wlan0 nicht auf.
Was kann ich unternehmen, dass die WLAN-Verbindung per default verfügbar ist?
Grüße, bolshi
hab gestern Ubuntu 11.04 installiert. Im Anschluss WLAN die '/etc/interfaces' und '/etc/wpa_supplicant/wpa_supplicant.conf' wie folgt eingerichtet:
/etc/interfaces:
# loopback network interface
auto lo
iface lo inet loopback
# LAN
# auto eth0
iface eth0 inet dhcp
test missing-cable
pre-up echo No link present.
pre-up false
# Wireless
auto wlan0
iface wlan0 inet dhcp
wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf
/etc/wpa_supplicant/wpa_supplicant.conf:
network={
ssid="mein Netz"
scan_ssid=1
mode=0
key_mgmt=WPA-PSK
proto=WPA
auth_alg=OPEN
pairwise=TKIP
psk="password"
}
Im Anschluss WLAN wie folgt aktiviert:
sudo ifconfig wlan0 up
Es erscheint folgende Meldung:
operation not possible due to rf-kill
Darauf gebe ich folgenden Befehl ein:
sudo rfkill unblock all
Beim ersten Versuch nach anlegen der wpa_supplicant.conf funktioniert die WLAN-Verbindung einwandfrei. Nach wiederholtem Neustart nicht mehr.
Auch bei ifconfig taucht wlan0 nicht auf.
Was kann ich unternehmen, dass die WLAN-Verbindung per default verfügbar ist?
Grüße, bolshi
Please also mark the comments that contributed to the solution of the article
Content-Key: 167238
Url: https://administrator.de/contentid/167238
Printed on: May 4, 2024 at 14:05 o'clock
4 Comments
Latest comment
Hi Bolshi,
arbeite mal dies hier durch.
Achte auch auf die Teile: "WLAN-Sondertasten" und "Konfiguration der Kanäle 12 und 13".
mfg
kowa
arbeite mal dies hier durch.
Achte auch auf die Teile: "WLAN-Sondertasten" und "Konfiguration der Kanäle 12 und 13".
mfg
kowa