Top-Themen

AppleEntwicklungHardwareInternetLinuxMicrosoftMultimediaNetzwerkeOff TopicSicherheitSonstige SystemeVirtualisierungWeiterbildungZusammenarbeit

Aktuelle Themen

Administrator.de FeedbackApache ServerAppleAssemblerAudioAusbildungAuslandBackupBasicBatch & ShellBenchmarksBibliotheken & ToolkitsBlogsCloud-DiensteClusterCMSCPU, RAM, MainboardsCSSC und C++DatenbankenDatenschutzDebianDigitiales FernsehenDNSDrucker und ScannerDSL, VDSLE-BooksE-BusinessE-MailEntwicklungErkennung und -AbwehrExchange ServerFestplatten, SSD, RaidFirewallFlatratesGoogle AndroidGrafikGrafikkarten & MonitoreGroupwareHardwareHosting & HousingHTMLHumor (lol)Hyper-VIconsIDE & EditorenInformationsdiensteInstallationInstant MessagingInternetInternet DomäneniOSISDN & AnaloganschlüsseiTunesJavaJavaScriptKiXtartKVMLAN, WAN, WirelessLinuxLinux DesktopLinux NetzwerkLinux ToolsLinux UserverwaltungLizenzierungMac OS XMicrosoftMicrosoft OfficeMikroTik RouterOSMonitoringMultimediaMultimedia & ZubehörNetzwerkeNetzwerkgrundlagenNetzwerkmanagementNetzwerkprotokolleNotebook & ZubehörNovell NetwareOff TopicOpenOffice, LibreOfficeOutlook & MailPapierkorbPascal und DelphiPeripheriegerätePerlPHPPythonRechtliche FragenRedHat, CentOS, FedoraRouter & RoutingSambaSAN, NAS, DASSchriftartenSchulung & TrainingSEOServerServer-HardwareSicherheitSicherheits-ToolsSicherheitsgrundlagenSolarisSonstige SystemeSoziale NetzwerkeSpeicherkartenStudentenjobs & PraktikumSuche ProjektpartnerSuseSwitche und HubsTipps & TricksTK-Netze & GeräteUbuntuUMTS, EDGE & GPRSUtilitiesVB for ApplicationsVerschlüsselung & ZertifikateVideo & StreamingViren und TrojanerVirtualisierungVisual StudioVmwareVoice over IPWebbrowserWebentwicklungWeiterbildungWindows 7Windows 8Windows 10Windows InstallationWindows MobileWindows NetzwerkWindows ServerWindows SystemdateienWindows ToolsWindows UpdateWindows UserverwaltungWindows VistaWindows XPXenserverXMLZusammenarbeit

VMware Management Interface - startet nicht

Frage Virtualisierung Vmware

Mitglied: TodoDoc

TodoDoc (Level 1) - Jetzt verbinden

07.02.2007 um 09:21 Uhr, 10322 Aufrufe

Ich habe VMWare Server auf einem Debian Etch System zulaufen.


So weit läuft alles super, nur bekomme ich bei der Configuration des VMWares das LOG:


Stopping VMware services:
Virtual machine monitor done
Bridged networking on /dev/vmnet0 done
DHCP server on /dev/vmnet1 done
Host-only networking on /dev/vmnet1 done
DHCP server on /dev/vmnet8 done
NAT service on /dev/vmnet8 done
Host-only networking on /dev/vmnet8 done
Virtual ethernet done

Configuring fallback GTK+ 2.4 libraries.

In which directory do you want to install the mime type icons?
[/usr/share/icons]

What directory contains your desktop menu entry files? These files have a
.desktop file extension. [/usr/share/applications]

In which directory do you want to install the application's icon?
[/usr/share/pixmaps]

/usr/share/applications/vmware-server.desktop: error: Categories values must be one of "Core", "Development", "Building", "Debugger", "IDE", "GUIDesigner", "Profiling", "RevisionControl", "Translation", "Office", "Calendar", "ContactManagement", "Database", "Dictionary", "Chart", "Email", "Finance", "FlowChart", "PDA", "ProjectManagement", "Presentation", "Spreadsheet", "WordProcessor", "Graphics", "2DGraphics", "VectorGraphics", "RasterGraphics", "3DGraphics", "Scanning", "OCR", "Photography", "Viewer", "Settings", "DesktopSettings", "HardwareSettings", "PackageManager", "Network", "Dialup", "InstantMessaging", "IRCClient", "FileTransfer", "HamRadio", "News", "P2P", "RemoteAccess", "Telephony", "WebBrowser", "WebDevelopment", "AudioVideo", "Audio", "Midi", "Mixer", "Sequencer", "Tuner", "Video", "TV", "AudioVideoEditing", "Player", "Recorder", "DiscBurning", "Game", "ActionGame", "AdventureGame", "ArcadeGame", "BoardGame", "BlocksGame", "CardGame", "KidsGame", "LogicGame", "RolePlaying", "Simulation", "SportsGame", "StrategyGame", "Education", "Art", "Construction", "Music", "Languages", "Science", "Astronomy", "Biology", "Chemistry", "Geology", "Math", "MedicalSoftware", "Physics", "Teaching", "Amusement", "Applet", "Archiving", "Electronics", "Emulator", "Engineering", "FileManager", "Shell", "ScreenSaver", "TeminalEmulator", "TrayIcon", "System", "Filesystem", "Monitor", "Security", "Utility", "Accessibility", "Calculator", "Clock", "TextEditor", "KDE", "GNOME", "GTK", "Qt", "Motif", "Java", "ConsoleOnly" (found "Application")
desktop-file-install created an invalid desktop file!
Unable to install the .desktop menu entry file. You must add it to your menus
by hand.
/usr/share/applications/vmware-console-uri-handler.desktop: error: Categories values must be one of "Core", "Development", "Building", "Debugger", "IDE", "GUIDesigner", "Profiling", "RevisionControl", "Translation", "Office", "Calendar", "ContactManagement", "Database", "Dictionary", "Chart", "Email", "Finance", "FlowChart", "PDA", "ProjectManagement", "Presentation", "Spreadsheet", "WordProcessor", "Graphics", "2DGraphics", "VectorGraphics", "RasterGraphics", "3DGraphics", "Scanning", "OCR", "Photography", "Viewer", "Settings", "DesktopSettings", "HardwareSettings", "PackageManager", "Network", "Dialup", "InstantMessaging", "IRCClient", "FileTransfer", "HamRadio", "News", "P2P", "RemoteAccess", "Telephony", "WebBrowser", "WebDevelopment", "AudioVideo", "Audio", "Midi", "Mixer", "Sequencer", "Tuner", "Video", "TV", "AudioVideoEditing", "Player", "Recorder", "DiscBurning", "Game", "ActionGame", "AdventureGame", "ArcadeGame", "BoardGame", "BlocksGame", "CardGame", "KidsGame", "LogicGame", "RolePlaying", "Simulation", "SportsGame", "StrategyGame", "Education", "Art", "Construction", "Music", "Languages", "Science", "Astronomy", "Biology", "Chemistry", "Geology", "Math", "MedicalSoftware", "Physics", "Teaching", "Amusement", "Applet", "Archiving", "Electronics", "Emulator", "Engineering", "FileManager", "Shell", "ScreenSaver", "TeminalEmulator", "TrayIcon", "System", "Filesystem", "Monitor", "Security", "Utility", "Accessibility", "Calculator", "Clock", "TextEditor", "KDE", "GNOME", "GTK", "Qt", "Motif", "Java", "ConsoleOnly" (found "Application")
desktop-file-install created an invalid desktop file!
Unable to install the .desktop menu entry file. You must add it to your menus
by hand.
Trying to find a suitable vmmon module for your running kernel.

None of the pre-built vmmon modules for VMware Server is suitable for your
running kernel. Do you want this program to try to build the vmmon module for
your system (you need to have a C compiler installed on your system)? [yes]

Using compiler "/usr/bin/gcc". Use environment variable CC to override.

What is the location of the directory of C header files that match your running
kernel? [/lib/modules/2.6.18-3-686/build/include]

Extracting the sources of the vmmon module.

Building the vmmon module.

Using 2.6.x kernel build system.
make: Entering directory `/tmp/vmware-config3/vmmon-only'
make -C /lib/modules/2.6.18-3-686/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. modules
make[1]: Entering directory `/usr/src/linux-headers-2.6.18-3-686'
CC [M] /tmp/vmware-config3/vmmon-only/linux/driver.o
CC [M] /tmp/vmware-config3/vmmon-only/linux/hostif.o
CC [M] /tmp/vmware-config3/vmmon-only/common/cpuid.o
CC [M] /tmp/vmware-config3/vmmon-only/common/hash.o
CC [M] /tmp/vmware-config3/vmmon-only/common/memtrack.o
CC [M] /tmp/vmware-config3/vmmon-only/common/phystrack.o
CC [M] /tmp/vmware-config3/vmmon-only/common/task.o
CC [M] /tmp/vmware-config3/vmmon-only/common/vmx86.o
CC [M] /tmp/vmware-config3/vmmon-only/vmcore/moduleloop.o
LD [M] /tmp/vmware-config3/vmmon-only/vmmon.o
Building modules, stage 2.
MODPOST
CC /tmp/vmware-config3/vmmon-only/vmmon.mod.o
LD [M] /tmp/vmware-config3/vmmon-only/vmmon.ko
make[1]: Leaving directory `/usr/src/linux-headers-2.6.18-3-686'
cp -f vmmon.ko ./../vmmon.o
make: Leaving directory `/tmp/vmware-config3/vmmon-only'
The module loads perfectly in the running kernel.

This program previously created the file /dev/vmmon, and was about to remove
it. Somebody else apparently did it already.

You have already setup networking.

Would you like to skip networking setup and keep your old settings as they are?
(yes/no) [no]

Do you want networking for your virtual machines? (yes/no/help) [yes]

Would you prefer to modify your existing networking configuration using the
wizard or the editor? (wizard/editor/help) [editor]

The following virtual networks have been defined:

. vmnet0 is bridged to eth0
. vmnet1 is a host-only network on private subnet 172.16.93.0.
. vmnet8 is a NAT network on private subnet 192.168.194.0.

Do you wish to make any changes to the current virtual networks settings?
(yes/no) [no]

Extracting the sources of the vmnet module.

Building the vmnet module.

Using 2.6.x kernel build system.
make: Entering directory `/tmp/vmware-config3/vmnet-only'
make -C /lib/modules/2.6.18-3-686/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. modules
make[1]: Entering directory `/usr/src/linux-headers-2.6.18-3-686'
CC [M] /tmp/vmware-config3/vmnet-only/driver.o
CC [M] /tmp/vmware-config3/vmnet-only/hub.o
CC [M] /tmp/vmware-config3/vmnet-only/userif.o
CC [M] /tmp/vmware-config3/vmnet-only/netif.o
CC [M] /tmp/vmware-config3/vmnet-only/bridge.o
CC [M] /tmp/vmware-config3/vmnet-only/procfs.o
CC [M] /tmp/vmware-config3/vmnet-only/smac_compat.o
SHIPPED /tmp/vmware-config3/vmnet-only/smac_linux.x386.o
LD [M] /tmp/vmware-config3/vmnet-only/vmnet.o
Building modules, stage 2.
MODPOST
CC /tmp/vmware-config3/vmnet-only/vmnet.mod.o
LD [M] /tmp/vmware-config3/vmnet-only/vmnet.ko
make[1]: Leaving directory `/usr/src/linux-headers-2.6.18-3-686'
cp -f vmnet.ko ./../vmnet.o
make: Leaving directory `/tmp/vmware-config3/vmnet-only'
The module loads perfectly in the running kernel.

Shutting down http.vmware: done
Starting httpd.vmware: done
Please specify a port for remote console connections to use [902]

You already have an entry for "/usr/sbin/vmware-authd" in the "/etc/inetd.conf"
file. No change will be made to it.

Hit enter to continue.

Configuring the VMware VmPerl Scripting API.

Building the VMware VmPerl Scripting API.

Using compiler "/usr/bin/gcc". Use environment variable CC to override.

Unable to compile the VMware VmPerl Scripting API.


The VMware VmPerl Scripting API was not installed. Errors encountered during
compilation and installation of the module can be found here:
/tmp/vmware-config3

You will not be able to use the "vmware-cmd" program.

Errors can be found in the log file:
'/tmp/vmware-config3/control-only/make.log'


Hit enter to continue.

Do you want this program to set up permissions for your registered virtual
machines? This will be done by setting new permissions on all files found in
the "/etc/vmware/vm-list" file. [no]

Generating SSL Server Certificate

In which directory do you want to keep your virtual machine files?
[/var/lib/vmware/Virtual Machines]

Do you want to enter a serial number now? (yes/no/help) [no]

Starting VMware services:
Virtual machine monitor done
Virtual ethernet done
Bridged networking on /dev/vmnet0 done
Host-only networking on /dev/vmnet1 (background) done
Host-only networking on /dev/vmnet8 (background) done
NAT service on /dev/vmnet8 done
Starting VMware virtual machines... done

The configuration of VMware Server 1.0.1 build-29996 for Linux for this running
kernel completed successfully.

Setup found that the VMware Management Interface is installed on your machine.
The VMware Management Interface configurator (/usr/bin/vmware-config-mui.pl)
needs to be run. Do you want to run this program now? [yes]

Configuring httpd.conf to run Apache as:
User: www-data and Group: nogroup

Set the number of minutes before a http session times out. (This is the length
of time before someone connecting to VMware Management Interface will be logged
out) [120]

Generating SSL Server Certificate

Starting httpd.vmware: done
The configuration of VMware Management Interface completed successfully.

vmware:/tmp/vmware-mui-distrib#



Frage:

Warum startet das VMware Management Interface nicht?
Wenn ich einen Portscann mache, dann seigt er mir folgendes an:


vmware:/tmp/vmware-mui-distrib# nmap 127.0.0.1

Starting Nmap 4.11 ( http://www.insecure.org/nmap/ ) at 2007-02-07 09:33 CET
Interesting ports on localhost (127.0.0.1):
Not shown: 1671 closed ports
PORT STATE SERVICE
22/tcp open ssh
25/tcp open smtp
80/tcp open http
111/tcp open rpcbind
113/tcp open auth
139/tcp open netbios-ssn
445/tcp open microsoft-ds
631/tcp open ipp
902/tcp open iss-realsecure-sensor

Nmap finished: 1 IP address (1 host up) scanned in 0.114 seconds
vmware:/tmp/vmware-mui-distrib#


Es lief schon mal unter Debian Etch, das weiß ich.
Neuester Wissensbeitrag
Festplatten, SSD, Raid

12TB written pro SSD in 2 Jahren mit RAID5 auf Hyper-VServer

Erfahrungsbericht von Lochkartenstanzer zum Thema Festplatten, SSD, Raid ...

Ähnliche Inhalte
Windows Server
Server 2008R2 startet nicht mehr (Bad Patch 0xa) (18)

Frage von Haures zum Thema Windows Server ...

Ubuntu
Kerio Mailserver Startet nicht (5)

Frage von Patrick2017 zum Thema Ubuntu ...

Heiß diskutierte Inhalte
Windows Userverwaltung
Ausgeschiedene Mitarbeiter im Unternehmen - was tun mit den AD Konten? (34)

Frage von patz223 zum Thema Windows Userverwaltung ...

LAN, WAN, Wireless
gelöst Server erkennt Client nicht wenn er ausserhalb des DHCP Pools liegt (28)

Frage von Mar-west zum Thema LAN, WAN, Wireless ...

Windows Server
Server 2008R2 startet nicht mehr (Bad Patch 0xa) (18)

Frage von Haures zum Thema Windows Server ...