fasteddi
Goto Top

Windows 10 Pro ohne Monitor nur 640x480 Auflösung beim Teamview oder VNC Aufschaltung

Hallo Zusammen,

ich habe Windows 10 Pro wo kein Monitor angeschlossen sein soll.
Beim Aufschalten per TeamView oder per VNC habe ich nur eine Auflösung von 640x480 die ich nicht verändern kann.
Dieses Problem gibt es wohl nicht beim RDP, wie kann ich die Auflösung per VNC/TV dennoch ändern?
Ich habe hier zwar zu diesem Thema schon was gefunden aber es war leider keine Lösung dabei:

Remote-Auflösung erhöhen bei nicht angeschlossenem Monitor (Generic Non-PnP Monitor) Remote-Auflösung erhöhen bei nicht angeschlossenem Monitor (Generic Non-PnP Monitor)
oder
Windows 7 - PC ohne Monitor - feste Auflösung erzwingen?
Leider kahm ich mit dem Tool nircmd.exe von Nirsoft nicht zurecht.

Ich hoffe Ihr könnt mir helfen. Wenn ein Monitor angeschlossen ist habe ich dessen Auflösung. Aber ich möchte halt ohne Monitor den Rechner betreiben

Grüße aus der Klingenstadt

Content-Key: 336299

Url: https://administrator.de/contentid/336299

Ausgedruckt am: 19.03.2024 um 09:03 Uhr

Mitglied: Clijsters
Clijsters 27.04.2017 um 18:34:34 Uhr
Goto Top
Hast du dich mal via RDP aufgeschaltet und innerhalb der Sessoin den TV gestartet? Sollte er dann nicht die virtuelle GraKa verwenden?
Mitglied: GuentherH
GuentherH 27.04.2017 aktualisiert um 20:21:34 Uhr
Goto Top
Beim Aufschalten per TeamView oder per VNC habe ich nur eine Auflösung von 640x480 die ich nicht verändern kann.

Bastle dir einen Dummystecker, wie z.B. hier beschrieben http://www.oliver-schlenker.dyndns.org/vgadummy.html oder schau mal, ob es da schon fertige Produkte gibt.

Wir hatten ebenfalls einmal dieses Problem mit HP-Workstations - http://www8.hp.com/us/en/workstations/remote-graphics-software.html
Hier haben wir die Widerstände des Dummys direkt in einen VGA Stecker eingebaut.

LG Günther
Mitglied: BassFishFox
BassFishFox 27.04.2017 aktualisiert um 21:19:34 Uhr
Goto Top
Die Dummy's gibt es fertig hier z.B..

http://www.ebay.de/itm/VGA-Dummy-Plug-Headless-Bitcoin-Litecoin-mining- ...

Allerdings sind die drei 75 Ohm hinten in der VGA-Buchse preisguenstiger. face-wink

http://www.geeks3d.com/20091230/vga-hack-how-to-make-a-vga-dummy-plug/

BFF
Mitglied: Pedant
Pedant 29.04.2017 um 11:46:43 Uhr
Goto Top
Hallo FastEddi,

etwas teurer aber durchaus interessant sind EDID-Emulatoren.
Sie gaukeln der Grafikkarte einen echten Monitor vor und man kann daran auch einen Monitor anschließen, wenn man denn möchte.
VGA - http://www.lindy.de/EDID-DDC-Emulator-Adapter-VGA.htm?websale8=ld0101&a ...
DVI - http://www.lindy.de/EDID-DDC-Emulator-Adapter-DVI-D.htm?websale8=ld0101 ...
HDMI - http://www.lindy.de/EDID-DDC-Emulator-Adapter-HDMI.htm?websale8=ld0101& ...
Programmiergerät - http://www.lindy.de/EDID-DDC-Emulator-Programmiergeraet-fuer-VGA-DVI-Em ...

Das Programmiergerät benötigt man nur, denn man die EDID-Daten eines speziellen Monitors klonen möchte.
Unprogrammiert haben diese Emulatoren einen Standard-Datensatz (siehe Technische Datails).

Gruß Frank
Mitglied: FastEddi
FastEddi 02.05.2017 um 11:33:37 Uhr
Goto Top
Hallo danke für die Antworten, aber ich kann mir noch Vorstellen das Microsoft keine andere Möglichkeit bereit hält als einen Monitor Dummy anzuschließen. Dass sollte doch auch anders gehen.
Mal schauen ob nicht noch einer ein kleines Tool oder einen Vernünftigen Registry Eintrag für mich Parat hat. Aber Danke für eure Mühen
Mitglied: tom1stein
tom1stein 05.04.2019 um 09:41:04 Uhr
Goto Top
Microsoft scheint wirklich nichts zu bieten.
Aber Dritthersteller erledigen das:
https://www.windowspro.de/tipp/bildschirmaufloesung-auf-kommandozeile-an ...
Mitglied: Pedant
Pedant 05.04.2019 um 12:16:08 Uhr
Goto Top
Hallo tom1stein,

der Thread ist zwar schon etwas betagt, aber die Problematik ist unverändert.

Das Tool auf das Du hinweist, wird das Problem vermutlich nicht lösen.
Es kann die Bildschirmauflösung per Kommandozeile ändern, aber es wird vermutlich auch keine anderen Auflösungen einstellen können, als man über die Windows-Einstellungen einstellen könnte.
Ohne angeschossenen Bildschirm (real oder emuliert) wird es bei einer unerwünscht niedrigen Auflösung bleiben.

Das Tool ist allerdings ganz nett.
Man muss es auch nicht installieren, um es nutzen zu können.
Ausprobiert habe ich es unter
Windows 10 Pro 64-bit (de-DE) 1809 [10.0.17763.404] mit Nvidia GeForce GTX 570.

Vorgehensweise

1. Download
https://sourceforge.net/projects/qres/files/qres/
QRes setup 1.0.9

2. 2-fach auspacken
qres-setup1090.zip entpacken
Im enthaltenen Ordner patches die Datei qres1095.zip entpacken.
Die enthaltenen Dateien qres.exe und qres32.dll aus dem Unterordner system in einen Ordner seiner Wahl kopieren.
Die Dateien müssen nebeneinander liegen, also ohne den Unterordner system zu verwenden.

3. Ausführen
Die Syntax ist beispielsweise:
qres.exe x=1280 y=1024

Die Readme-Datei mit vollständiger Syntaxbescheibung erhält man nur, wenn man das Programm installiert.
Für die, die sich das sparen möchten, hab ich deren Inhalt hier eingefügt.

QRes v 1.0.9.0:  QuickRes screen mode switch
============================================

QRes is a small application that provides automation for the
Microsoft QuickRes screen mode change in Windows 95. QuickRes is
a Microsoft add-on for Windows 95 that allows you to change color
depth and screen resolution without restarting the machine.

QRes adds a front end to QuickRes so that you can automatically
switch color mode or screen resolution when you start a Windows
application. For instance, when you start a game that uses
640 x 480 pixels screen area and requires 256 color mode, you can
make QRes automatically switch to this screen mode as long as you
run the game and switch back to your regular screen mode when the
game is over.

QRes uses the built-in capabilities of Microsoft QuickRes for the 
screen mode switch on Windows 95. The added benefit that QRes 
offers is automation: the game player does not have to remember 
to switch to the correct screen mode before starting the game, 
doesn’t even have to know or understand which mode to use. This 
is especially useful when the computer is used by small children 
or other computer illiterates.

You can download QuickRes from the following page on Microsoft's 
site:
   http://www.microsoft.com/windows95/info/powertoys.htm

The newest version of Windows 95 (OSR2) and Windows 98 have
QuickRes built in. Double-click the 'System' icon in the 
control panel to find out which Windows version you have. 
Windows 95 OSR2 has system version '4.00.950 B', older versions 
have system version '4.00.950' or '4.00.950a' (OSR1).

QRes can be used without QuickRes on Windows NT 4.0.


Usage
=====
Microsoft QuickRes *must* be installed to use QRes on Windows 95. 
Configure QuickRes so that it switches screen modes without 
rebooting or asking questions for proper operation of QRes.

You can easily modify a desktop or start menu shortcut so that it 
calls QRes before starting the program. Just run the 
'QRes Configuration' wizard and follow instructions.

Alternatively you can click the right mouse button on any desktop
shortcut, select "Properties" and click the QRes tab of the 
property sheet to configure QRes for that shortcut.

QRes does not work with the AutoPlay feature of CD games.


       
Command line summary
====================
qres [options] program_name [program options]

qres options
------------
c=nnn  : switch to nnn-bit color mode
         c=8    -  256 colors
         c=16   -  High color 16 bit (65536 colors)
         c=24   -  True color 24 bit
         c=32   -  True color 32 bit (newer VGA cards)

x=nnn  : switch to nnn pixels horizontal resolution
         x=640  -  640 x 480 (standard VGA resolution)
         x=800  -  800 x 600
         x=1024 -  1024 x 768
         (See QuickRes menu for other supported resolutions)

y=nnn  : switch to nnn pixels vertical resolution. It is not
         necessary to specify both x and y, just x will do fine.

/R     : restore original screen mode after the program finishes.

         This does not work for all programs. If the game has a
         'loader program' that terminates after starting the 
         main program /R will switch back too soon.

QRes shows the command line options when it is run without
any parameters.

New parameters in beta version 1.08 are listed below. These parameters
are not supported by the QRes configuration wizard or property page, 
you have to configure them manually.

/D     : direct screen mode switch, not using QuickRes.
         This mode is the default on Windows NT but does not work
         on most Windows 95 systems.

f=nnn  : switch to nnn Hertz screen refresh rate (Windows NT only).

q=nnn  : delay before detecting MS QuickRes in multiples of 1/10 sec.
         Use q=10 or higher if you run both QuickRes and qres from
         the StartUp group in your start menu.

a=nnn  : Application start delay in multiples of 1/10 sec.
         Use this if your machine is very slow in switching screen
         resolutions.

Author   : Berend Engelbrecht
           Utrecht, Netherlands
e-mail   : einhard@wxs.nl
home page: http://www.berend.com/qres.html
           http://home.pi.net/~einhard/qres.html

Copyright (C) 1997 Berend Engelbrecht. All Rights Reserved

QRes is freeware. You may freely copy and distribute it as long 
as you distribute the complete package. You are specifically
prohibited from charging, or requesting donations, for any such
copies, however made; and from distributing the software and/or
documentation with commercial products, with one exception: 
Disk Vendors approved by the Association of Shareware 
Professionals are permitted to redistribute QRes without
specific written permission.

Questions or comments can be sent by e-mail to einhard@pi.net


History
=======
- Version 1.0.9.0   (March 22, 1997)
  Fixed configuration problems with Internet Explorer 4 on 
  Windows 95 OSR2 and Windows 98. Added support for screen savers 
  on Windows 95.

- Version 1.0.8.2   (BETA)
  Fixed property sheet problem with Internet Explorer 4.

- Version 1.0.8.1   (BETA)
  Updated help file. Microsoft QuickRes configuration check and 
  QuickRes autostart.

- Versiom 1.0.8.0   (BETA September 8, 1997)
  This version adresses the problems most frequently reported by 
  qres users. The graphical user interface does not yet support
  all new options.

- Version 1.0.6.0   (March 16, 1997)
  Windows NT support.
  Fixes inability to disable 'Restore' option in config wizard
  and property sheet.
  Fixes spurious error message when running qres without 
  specifying a program.

- Version 1.0.0.0   (January 31, 1997)
  Windows help file.
  Bugfixes in property sheet and wizard.

- Version 0.4.0.0   (January 25, 1997)
  Added restore of desktop icon positions after original
  screen resolution is restored.
  Added QRes property sheet.
  Bugfixes in configuration wizard.

- Version 0.3.0.0   (January 17, 1997)
  Added QRes Configuration wizard.
  Added Setup program.
  Bugfixes for OSR2.

- Version 0.2.0.0   (January 10, 1997)
  Added /R command line option.

- Version 0.1.0.0   (January 2, 1997)
  Initial version.


Compatibility
=============

QRes has been tested with the following operating system software:
- Windows 95 version 4.00.950 (original) with QuickRes powertoy;
- Windows 95 version 4.00.950A with QuickRes powertoy;
- Windows 95 version 4.00.950B (OSR2) with built-in QuickRes.
- Windows 98 beta 3 (version 4.10.1602) with built-in QuickRes.


The resolution switch has been tested with the following graphics
cards:
- ATI Mach 64
- Cirrus Logic 754X (laptop)
- Matrox Millenium
- Number 9 9FX vision 330
- S3 Trio 64 and Trio 64 PCI


Remarks
=======

- The powertoy version of QuickRes can in most cases not change
  color depth without restarting. When the PC restarts the 
  automatic application start does not work. This problem has
  been fixed in the OSR2 version.
- QuickRes will not accept 16 color modes (c=4), even though 
  most graphics cards support them.
- The QRes utility cannot be used with the autoplay feature
  of newer CD games.
- QRes sometimes causes screen flicker in Windows NT. Use the F=nnn 
  command line parameter (screen refresh rate parameter) to prevent 
  this. Try out a screen refresh rate setting in 'Display Properties'
  before using it in QRes.

Gruß Frank