- Copy internal post link
- Copy external post link
- Report article
https://administrator.de/forum/cisco-3560-probleme-mit-dem-flash-speicher-179991.html
[content:179991]
Cisco 3560 Probleme mit dem Flash Speicher
ich habe eine Cisco 3560 auf dem ich Probleme mit dem Flashspeicher habe.
Test_switch#sh flash
Directory of flash:/
%Error opening flash:/ (Invalid argument)
No space information available
Test_switch#dir
%Error opening flash:/ (Invalid argument)
Test_switch#
Beim booten hat er aber alles gefunden...
Test_switch#sh boot
BOOT path-list : flash:/c3560-ipbasek9-mz.122-44.SE2/c3560-ipbasek9-mz.122-44.SE2.bin
Config file : flash:/config.text
Private Config file : flash:/private-config.text
Enable Break : no
Manual Boot : no
HELPER path-list :
Auto upgrade : yes
Auto upgrade path :
Timeout for Config
Download: 0 seconds
Config Download
via DHCP: disabled (next boot: disabled)
Eine File system Check ist nicht möglich...
Test_switch#fsck
Fsck operation may take a while. Continue? [confirm]
%Error fscking flash: (Device or resource busy)
booten will ich den Switch sehr ungerne, ich befürchte das er dann Nackt neustartet, da hängt aber ein Produktionslinie dran...
Hat jemand eine Idee was da los ist?
brammer
Content-Key: 179991
Url: https://administrator.de/contentid/179991
Printed on: April 26, 2024 at 17:04 o'clock
- Comment overview - Please log in
- Copy internal comment link
- Copy external comment link
- To the beginning of the comments
https://administrator.de/forum/cisco-3560-probleme-mit-dem-flash-speicher-179991.html#comment-730299
[content:179991#730299]
Du musst aber keine Angst haben das der Switch nicht rebootet. Auch wenn das Flash corrupted ist kannst du über den rommon Bootloader immer wieder ein aktuelles Image booten und den Switch wieder Leben einhauchen.
Allerdings bedeutet das dann eine längere Ausfallzeit zum Recover. So oder so ist das angeraten. Spätestens beim nächsten kurzen Stromausfall holt dich das problem ganz schnell wieder ein.
Untersuchen musst du es deshalb schon....
- Copy internal comment link
- Copy external comment link
- To the beginning of the comments
https://administrator.de/forum/cisco-3560-probleme-mit-dem-flash-speicher-179991.html#comment-730459
[content:179991#730459]
@aqui
dann hoffe ich mal auf den Best Case!
Der Switch steht 4000 Km weit weg beim Kunden.
Rebooten wird er, da ist mir klar, aber evtl. ohne IOS und ohne config...
Und dann ist das mit der Erreichbarkeit des Switches so ein Problem, der hängt an einem Trunk hinter einem 881.
Muss einfach abwarten was der Kunde in den nächsten Tagen sagt.
brammer
- Copy internal comment link
- Copy external comment link
- To the beginning of the comments
https://administrator.de/forum/cisco-3560-probleme-mit-dem-flash-speicher-179991.html#comment-743733
[content:179991#743733]
der Switch ist jetzt getauscht, Gerät liegt hier bei mir auf dem Tisch.
Die selben Symptome...
Allerdings startet der Switch ohne Probleme, nur anstatt der üblichen 2 minuten braucht er etwa 5 minuten.
Base ethernet MAC Address: 00:23:34:21:8c:00
Xmodem file system is available.
The password-recovery mechanism is enabled.
Initializing Flash...
flashfs: 354 files, 6 directories
flashfs: 0 orphaned files, 0 orphaned directories
flashfs: Total bytes: 32514048
flashfs: Bytes used: 32514048
flashfs: Bytes available: 0
flashfs: flashfs fsck took 102 seconds.
...done Initializing Flash.
Boot Sector Filesystem (bs) installed, fsid: 3
done.
Loading "flash:/c3560-ipbasek9-mz.122-44.SE2/c3560-ipbasek9-mz.122-44.SE2.bin"...@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
File "flash:/c3560-ipbasek9-mz.122-44.SE2/c3560-ipbasek9-mz.122-44.SE2.bin" uncompressed and installed, entry point: 0x3000
executing...
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, C3560 Software (C3560-IPBASEK9-M), Version 12.2(44)SE2, RELEASE SOFTWARE (fc2)
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Thu 01-May-08 15:28 by antonino
Image text-base: 0x00003000, data-base: 0x01600000
Initializing flashfs...
flashfs[1]: 354 files, 6 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 32514048
flashfs[1]: Bytes used: 32514048
flashfs[1]: Bytes available: 0
flashfs[1]: flashfs fsck took 100 seconds.
flashfs[1]: Initialization complete....done Initializing flashfs.
POST: CPU MIC register Tests : Begin
POST: CPU MIC register Tests : End, Status Passed
POST: PortASIC Memory Tests : Begin
POST: PortASIC Memory Tests : End, Status Passed
POST: CPU MIC interface Loopback Tests : Begin
POST: CPU MIC interface Loopback Tests : End, Status Passed
POST: PortASIC RingLoopback Tests : Begin
POST: PortASIC RingLoopback Tests : End, Status Passed
POST: PortASIC CAM Subsystem Tests : Begin
POST: PortASIC CAM Subsystem Tests : End, Status Passed
POST: PortASIC Port Loopback Tests : Begin
POST: PortASIC Port Loopback Tests : End, Status Passed
Waiting for Port download...Complete
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
cisco WS-C3560-24TS (PowerPC405) processor (revision E0) with 0K/8184K bytes of memory.
Processor board ID FDO1236Y0LZ
Last reset from power-on
1 Virtual Ethernet interface
24 FastEthernet interfaces
2 Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.
512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : 00:23:34:21:8C:00
Motherboard assembly number : 73-9897-06
Power supply part number : 341-0097-02
Motherboard serial number : FDO12350Y0Z
Power supply serial number : DCA122988G3
Model revision number : E0
Motherboard revision number : B0
Model number : WS-C3560-24TS-S
System serial number : FDO1236Y0LZ
Top Assembly Part Number : 800-26160-02
Top Assembly Revision Number : E0
Version ID : V02
CLEI Code Number : COMMG00ARB
Hardware Board Revision Number : 0x01
Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 1 26 WS-C3560-24TS 12.2(44)SE2 C3560-IPBASEK9-M
% There may not be enough space available to collect the complete crashinfo
% It would be advisable to have 282836 bytes free space on flash:crashinfo
Press RETURN to get started!
*Mar 1 00:02:02.473: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down
*Mar 1 00:02:03.715: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan
000003: *Mar 1 01:02:06.047: %SYS-6-CLOCKUPDATE: System clock has been updated from 00:02:06 UTC Mon Mar 1 1993 to 01:02:06 EET Mon Mar 1 1993, configured from console by console.
000004: *Mar 1 01:02:06.718: %SYS-5-CONFIG_I: Configured from memory by console
000005: *Mar 1 01:02:07.582: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C3560 Software (C3560-IPBASEK9-M), Version 12.2(44)SE2, RELEASE SOFTWARE (fc2)
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Thu 01-May-08 15:28 by antonino
K597381-SWIK221#sh flash% Generating 1024 bit RSA keys, keys will be non-exportable...
Directory of flash:/
2 -rwx 3096 Mar 1 1993 22:15:36 +01:00 multiple-fs
3 drwx 192 Mar 1 1993 01:13:48 +01:00 c3560-ipbasek9-mz.122-44.SE2
5 -rwx 4096 Mar 1 1993 01:12:08 +01:00 multiple-fs.new
6 -rwx 7346 Mar 1 1993 22:15:36 +01:00 config.text
814 -rwx 684 Mar 1 1993 01:01:41 +01:00 vtp.dat
815 -rwx 564 Mar 1 1993 01:01:40 +01:00 vlan.dat
7 -rwx 0 Mar 1 1993 01:10:49 +01:00 config.text.new
817 -rwx 21566976 Mar 1 1993 01:02:09 +01:00 logging_errors.txt
32514048 bytes total (0 bytes free)
K597381-SWIK221#
K597381-SWIK221#
K597381-SWIK221#
K597381-SWIK221#[OK]
logo
000006: *Mar 1 01:02:28.277: %SSH-5-ENABLED: SSH 2.0 has been enabled
000007: *Mar 1 01:02:29.778: %PKI-6-AUTOSAVE: Running configuration saved to NVRA
K597381-SWIK221#
Error writing new config file "flash:/config.text.new"
Error writing new config file "flash:/private-config.text.new"
flashfs[1]: erasing block, flash handle 0x22D2E8C, device 0, offset 0x13A0000: Poll Timeout
flashfs[1]: writing to flash handle 0x22D2E8C, device 0, offset 0x15E0000, length 0x208: Illegal Operation -- setting bit(s) with write operation
flashfs[1]: sector ptr: {0xAF, 0x76}
flashfs[1]: filesystem marked down. Use "fsck" to recover.
Error writing new block-fs file "flash:/multiple-fs.new"
K597381-SWIK221#fsck
Fsck operation may take a while. Continue? [confirm]
%Error fscking flash: (Device or resource busy)
K597381-SWIK221#
Initializing Flash...
flashfs: sector 118, block 15 checksum (0x321f != 0xe2f0)
flashfs: Checking block 157...bad block number (-1)
flashfs: erasing block 157...done.
Initializing Flash...
flashfs: sector 118, block 15 checksum (0x321f != 0xe2f0)
flashfs: Checking block 157...bad block number (-1)
flashfs: erasing block 157...done.
Test_Switch#sh flash
Directory of flash:/
%Error opening flash:/ (Invalid argument)
No space information available
Test_Switch#wr me
Building configuration...
nv_done: unable to open "flash:/config.text.new"
nv_done: unable to open "flash:/private-config.text.new"
nv_done: unable to open "flash:/multiple-fs.new"[OK]
brammer
- Copy internal comment link
- Copy external comment link
- To the beginning of the comments
https://administrator.de/forum/cisco-3560-probleme-mit-dem-flash-speicher-179991.html#comment-744081
[content:179991#744081]
- Copy internal comment link
- Copy external comment link
- To the beginning of the comments
https://administrator.de/forum/cisco-3560-probleme-mit-dem-flash-speicher-179991.html#comment-744155
[content:179991#744155]
geht nicht...
Test_Switch#squeeze flash
^
% Invalid input detected at '^' marker.
Test_Switch#sh ver
Cisco IOS Software, C3560 Software (C3560-IPBASEK9-M), Version 12.2(44)SE2, RELEASE SOFTWARE (fc2)
Squeeze sollte aber ab Version 12.2(1) funktionieren.
Ich werde mal versuchen ob ich per tftp eine neuere IOS version auf den switch bekomme.
brammer
- Copy internal comment link
- Copy external comment link
- To the beginning of the comments
https://administrator.de/forum/cisco-3560-probleme-mit-dem-flash-speicher-179991.html#comment-745427
[content:179991#745427]
so ich habe den Switch wieder in Griff bekommen.
Im ROM mode habe ich den Flash neu initialisieren lassen dabei wurde ein paar defekte Sektoren ausgespart.
Danach konnte ich auch auf den Switch normal zu greifen.
Interessant war die logging_errors.txt. Die war auf 20.5 MB angewachsen
Die beinhaltete fast 140.000 Zeilen .
000657: *Mar 10 00:52:45.200: %PORT_SECURITY-2-PSECURE_VIOLATION: Security violation occurred, caused by MAC address 000e.8cxx.xxxx on port FastEthernet0/4.
Nach dem Löschen der Datei lief der Switch wieder komplett normal
brammer
- Copy internal comment link
- Copy external comment link
- To the beginning of the comments
https://administrator.de/forum/cisco-3560-probleme-mit-dem-flash-speicher-179991.html#comment-746176
[content:179991#746176]