Top-Themen

AppleEntwicklungHardwareInternetLinuxMicrosoftMultimediaNetzwerkeOff TopicSicherheitSonstige SystemeVirtualisierungWeiterbildungZusammenarbeit

Aktuelle Themen

Administrator.de FeedbackApache ServerAppleAssemblerAudioAusbildungAuslandBackupBasicBatch & ShellBenchmarksBibliotheken & ToolkitsBlogsCloud-DiensteClusterCMSCPU, RAM, MainboardsCSSC und C++DatenbankenDatenschutzDebianDigitiales FernsehenDNSDrucker und ScannerDSL, VDSLE-BooksE-BusinessE-MailEntwicklungErkennung und -AbwehrExchange ServerFestplatten, SSD, RaidFirewallFlatratesGoogle AndroidGrafikGrafikkarten & MonitoreGroupwareHardwareHosting & HousingHTMLHumor (lol)Hyper-VIconsIDE & EditorenInformationsdiensteInstallationInstant MessagingInternetInternet DomäneniOSISDN & AnaloganschlüsseiTunesJavaJavaScriptKiXtartKVMLAN, WAN, WirelessLinuxLinux DesktopLinux NetzwerkLinux ToolsLinux UserverwaltungLizenzierungMac OS XMicrosoftMicrosoft OfficeMikroTik RouterOSMonitoringMultimediaMultimedia & ZubehörNetzwerkeNetzwerkgrundlagenNetzwerkmanagementNetzwerkprotokolleNotebook & ZubehörNovell NetwareOff TopicOpenOffice, LibreOfficeOutlook & MailPapierkorbPascal und DelphiPeripheriegerätePerlPHPPythonRechtliche FragenRedHat, CentOS, FedoraRouter & RoutingSambaSAN, NAS, DASSchriftartenSchulung & TrainingSEOServerServer-HardwareSicherheitSicherheits-ToolsSicherheitsgrundlagenSolarisSonstige SystemeSoziale NetzwerkeSpeicherkartenStudentenjobs & PraktikumSuche ProjektpartnerSuseSwitche und HubsTipps & TricksTK-Netze & GeräteUbuntuUMTS, EDGE & GPRSUtilitiesVB for ApplicationsVerschlüsselung & ZertifikateVideo & StreamingViren und TrojanerVirtualisierungVisual StudioVmwareVoice over IPWebbrowserWebentwicklungWeiterbildungWindows 7Windows 8Windows 10Windows InstallationWindows MobileWindows NetzwerkWindows ServerWindows SystemdateienWindows ToolsWindows UpdateWindows UserverwaltungWindows VistaWindows XPXenserverXMLZusammenarbeit
GELÖST

Linux erkennt keine Festplatte, Windows dagegen schon

Frage Linux

Mitglied: LayerAcht

LayerAcht (Level 1) - Jetzt verbinden

09.05.2010 um 21:13 Uhr, 6173 Aufrufe, 10 Kommentare

Ich habe ein Toshiba Qosmio G10 und möchte Linux installieren, jedoch findet Linux keine Festplatten. Das verrückte ist aber, dass Windows einwandfrei funktioniert

Erstmal einige Informationen zu meinem Notebook:
Prozessor: Intel Centrino (1,8GHz)
RAM: 1024 Gb
Chipsatz: Intel 915PM Express-Chipsatz
Video: NVIDIA Go 6600 (PCI Express)
HDD: Fujitsu mit 60 GB (IDE)

Wie bereits geschrieben funktioniert Windows XP wunderbar, jedoch lässt sich kein Linux installieren. Ich habe es mit Ubuntu, Fedora und Knoppix versucht.
Ich habe mehrere Festplatten ausprobiert, also liegt es schonmal nicht an den Festplatten.

Mir ist aufgefallen, dass die HDD-LED dauerhaft leuchtet (wenn ich Linux von CD starte. Bei Windows ist alles i.o.)

Hier mal ein kompletter Auszug von dmesg:

01.
[    0.000000] Initializing cgroup subsys cpuset 
02.
[    0.000000] Initializing cgroup subsys cpu 
03.
[    0.000000] Linux version 2.6.31-14-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009 (Ubuntu 2.6.31-14.48-generic) 
04.
[    0.000000] KERNEL supported cpus: 
05.
[    0.000000]   Intel GenuineIntel 
06.
[    0.000000]   AMD AuthenticAMD 
07.
[    0.000000]   NSC Geode by NSC 
08.
[    0.000000]   Cyrix CyrixInstead 
09.
[    0.000000]   Centaur CentaurHauls 
10.
[    0.000000]   Transmeta GenuineTMx86 
11.
[    0.000000]   Transmeta TransmetaCPU 
12.
[    0.000000]   UMC UMC UMC UMC 
13.
[    0.000000] BIOS-provided physical RAM map: 
14.
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) 
15.
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) 
16.
[    0.000000]  BIOS-e820: 00000000000e0000 - 00000000000eee00 (reserved) 
17.
[    0.000000]  BIOS-e820: 00000000000eee00 - 00000000000ef000 (ACPI NVS) 
18.
[    0.000000]  BIOS-e820: 00000000000ef000 - 0000000000100000 (reserved) 
19.
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable) 
20.
[    0.000000]  BIOS-e820: 000000003ffb0000 - 000000003ffc0000 (ACPI data) 
21.
[    0.000000]  BIOS-e820: 000000003ffc0000 - 0000000040000000 (reserved) 
22.
[    0.000000]  BIOS-e820: 00000000f0000000 - 00000000f0006000 (reserved) 
23.
[    0.000000]  BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved) 
24.
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved) 
25.
[    0.000000]  BIOS-e820: 00000000fed13000 - 00000000fed14000 (reserved) 
26.
[    0.000000]  BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) 
27.
[    0.000000]  BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved) 
28.
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) 
29.
[    0.000000]  BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved) 
30.
[    0.000000]  BIOS-e820: 00000000ffe80000 - 0000000100000000 (reserved) 
31.
[    0.000000] DMI 2.3 present. 
32.
[    0.000000] last_pfn = 0x3ffb0 max_arch_pfn = 0x100000 
33.
[    0.000000] MTRR default type: uncachable 
34.
[    0.000000] MTRR fixed ranges enabled: 
35.
[    0.000000]   00000-9FFFF write-back 
36.
[    0.000000]   A0000-BFFFF uncachable 
37.
[    0.000000]   C0000-CFFFF write-protect 
38.
[    0.000000]   D0000-DFFFF uncachable 
39.
[    0.000000]   E0000-E7FFF write-protect 
40.
[    0.000000]   E8000-EFFFF write-back 
41.
[    0.000000]   F0000-FFFFF write-protect 
42.
[    0.000000] MTRR variable ranges enabled: 
43.
[    0.000000]   0 base 0FEDA0000 mask FFFFE0000 write-back 
44.
[    0.000000]   1 base 0FFF00000 mask FFFF00000 write-protect 
45.
[    0.000000]   2 base 000000000 mask FC0000000 write-back 
46.
[    0.000000]   3 disabled 
47.
[    0.000000]   4 disabled 
48.
[    0.000000]   5 disabled 
49.
[    0.000000]   6 disabled 
50.
[    0.000000]   7 disabled 
51.
[    0.000000] PAT not supported by CPU. 
52.
[    0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) 
53.
[    0.000000] Scanning 1 areas for low memory corruption 
54.
[    0.000000] modified physical RAM map: 
55.
[    0.000000]  modified: 0000000000000000 - 0000000000002000 (usable) 
56.
[    0.000000]  modified: 0000000000002000 - 0000000000006000 (reserved) 
57.
[    0.000000]  modified: 0000000000006000 - 000000000009fc00 (usable) 
58.
[    0.000000]  modified: 000000000009fc00 - 00000000000a0000 (reserved) 
59.
[    0.000000]  modified: 00000000000e0000 - 00000000000eee00 (reserved) 
60.
[    0.000000]  modified: 00000000000eee00 - 00000000000ef000 (ACPI NVS) 
61.
[    0.000000]  modified: 00000000000ef000 - 0000000000100000 (reserved) 
62.
[    0.000000]  modified: 0000000000100000 - 000000003ffb0000 (usable) 
63.
[    0.000000]  modified: 000000003ffb0000 - 000000003ffc0000 (ACPI data) 
64.
[    0.000000]  modified: 000000003ffc0000 - 0000000040000000 (reserved) 
65.
[    0.000000]  modified: 00000000f0000000 - 00000000f0006000 (reserved) 
66.
[    0.000000]  modified: 00000000f0008000 - 00000000f000c000 (reserved) 
67.
[    0.000000]  modified: 00000000fec00000 - 00000000fed00000 (reserved) 
68.
[    0.000000]  modified: 00000000fed13000 - 00000000fed14000 (reserved) 
69.
[    0.000000]  modified: 00000000fed20000 - 00000000fed90000 (reserved) 
70.
[    0.000000]  modified: 00000000feda0000 - 00000000fedc0000 (reserved) 
71.
[    0.000000]  modified: 00000000fee00000 - 00000000fef00000 (reserved) 
72.
[    0.000000]  modified: 00000000ffb00000 - 00000000ffc00000 (reserved) 
73.
[    0.000000]  modified: 00000000ffe80000 - 0000000100000000 (reserved) 
74.
[    0.000000] initial memory mapped : 0 - 00c00000 
75.
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 
76.
[    0.000000] Using x86 segment limits to approximate NX protection 
77.
[    0.000000]  0000000000 - 0000400000 page 4k 
78.
[    0.000000]  0000400000 - 0037400000 page 2M 
79.
[    0.000000]  0037400000 - 00377fe000 page 4k 
80.
[    0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 
81.
[    0.000000] RAMDISK: 3fa03000 - 3ff7f4e6 
82.
[    0.000000] Allocated new RAMDISK: 008ad000 - 00e294e6 
83.
[    0.000000] Move RAMDISK from 000000003fa03000 - 000000003ff7f4e5 to 008ad000 - 00e294e5 
84.
[    0.000000] ACPI: RSDP 000f0180 00014 (v00 TOSHIB) 
85.
[    0.000000] ACPI: RSDT 3ffb0000 0003C (v01 TOSHIB 750      00970814 TASM 04010000) 
86.
[    0.000000] ACPI: FACP 3ffb0064 00084 (v02 TOSHIB 750      00970814 TASM 04010000) 
87.
[    0.000000] ACPI: DSDT 3ffb00e8 050BB (v01 TOSHIB A003D    20051214 MSFT 0100000E) 
88.
[    0.000000] ACPI: FACS 000eee00 00040 
89.
[    0.000000] ACPI: SSDT 3ffb51a3 00231 (v01 TOSHIB A003D    20040908 MSFT 0100000E) 
90.
[    0.000000] ACPI: DBGP 3ffb54aa 00034 (v01 TOSHIB 750      00970814 TASM 04010000) 
91.
[    0.000000] ACPI: BOOT 3ffb003c 00028 (v01 TOSHIB 750      00970814 TASM 04010000) 
92.
[    0.000000] ACPI: APIC 3ffb5414 0005A (v01 TOSHIB 750      00970814 TASM 04010000) 
93.
[    0.000000] ACPI: MCFG 3ffb546e 0003C (v01 TOSHIB 750      00970814 TASM 04010000) 
94.
[    0.000000] ACPI: Local APIC address 0xfec80000 
95.
[    0.000000] 135MB HIGHMEM available. 
96.
[    0.000000] 887MB LOWMEM available. 
97.
[    0.000000]   mapped low ram: 0 - 377fe000 
98.
[    0.000000]   low ram: 0 - 377fe000 
99.
[    0.000000]   node 0 low ram: 00000000 - 377fe000 
100.
[    0.000000]   node 0 bootmap 00008000 - 0000ef00 
101.
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] 
102.
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000] 
103.
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000] 
104.
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000] 
105.
[    0.000000]   #3 [0000100000 - 00008a80a0]    TEXT DATA BSS ==> [0000100000 - 00008a80a0] 
106.
[    0.000000]   #4 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000] 
107.
[    0.000000]   #5 [00008a9000 - 00008ac1b8]              BRK ==> [00008a9000 - 00008ac1b8] 
108.
[    0.000000]   #6 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000] 
109.
[    0.000000]   #7 [00008ad000 - 0000e294e6]      NEW RAMDISK ==> [00008ad000 - 0000e294e6] 
110.
[    0.000000]   #8 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000] 
111.
[    0.000000] Zone PFN ranges: 
112.
[    0.000000]   DMA      0x00000000 -> 0x00001000 
113.
[    0.000000]   Normal   0x00001000 -> 0x000377fe 
114.
[    0.000000]   HighMem  0x000377fe -> 0x0003ffb0 
115.
[    0.000000] Movable zone start PFN for each node 
116.
[    0.000000] early_node_map[3] active PFN ranges 
117.
[    0.000000]     0: 0x00000000 -> 0x00000002 
118.
[    0.000000]     0: 0x00000006 -> 0x0000009f 
119.
[    0.000000]     0: 0x00000100 -> 0x0003ffb0 
120.
[    0.000000] On node 0 totalpages: 261963 
121.
[    0.000000] free_area_init_node: node 0, pgdat c0784900, node_mem_map c1000000 
122.
[    0.000000]   DMA zone: 32 pages used for memmap 
123.
[    0.000000]   DMA zone: 0 pages reserved 
124.
[    0.000000]   DMA zone: 3963 pages, LIFO batch:0 
125.
[    0.000000]   Normal zone: 1744 pages used for memmap 
126.
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31 
127.
[    0.000000]   HighMem zone: 272 pages used for memmap 
128.
[    0.000000]   HighMem zone: 34466 pages, LIFO batch:7 
129.
[    0.000000] Using APIC driver default 
130.
[    0.000000] ACPI: PM-Timer IO Port: 0xd808 
131.
[    0.000000] ACPI: Local APIC address 0xfec80000 
132.
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) 
133.
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) 
134.
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) 
135.
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 
136.
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) 
137.
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) 
138.
[    0.000000] ACPI: IRQ0 used by override. 
139.
[    0.000000] ACPI: IRQ2 used by override. 
140.
[    0.000000] ACPI: IRQ9 used by override. 
141.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs 
142.
[    0.000000] Using ACPI (MADT) for SMP configuration information 
143.
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs 
144.
[    0.000000] nr_irqs_gsi: 24 
145.
[    0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 
146.
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 
147.
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 
148.
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 00000000000ee000 
149.
[    0.000000] PM: Registered nosave memory: 00000000000ee000 - 00000000000ef000 
150.
[    0.000000] PM: Registered nosave memory: 00000000000ef000 - 0000000000100000 
151.
[    0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:b0000000) 
152.
[    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 
153.
[    0.000000] PERCPU: Embedded 14 pages at c1805000, static data 35612 bytes 
154.
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 259915 
155.
[    0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/xubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- debian-installer/language=de console-setup/layoutcode?=de 
156.
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) 
157.
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) 
158.
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) 
159.
[    0.000000] Enabling fast FPU save and restore... done. 
160.
[    0.000000] Enabling unmasked SIMD FPU exception support... done. 
161.
[    0.000000] Initializing CPU#0 
162.
[    0.000000] allocated 5241280 bytes of page_cgroup 
163.
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups 
164.
[    0.000000] Initializing HighMem for node 0 (000377fe:0003ffb0) 
165.
[    0.000000] Memory: 1019852k/1048256k available (4565k kernel code, 27688k reserved, 2143k data, 540k init, 138952k highmem) 
166.
[    0.000000] virtual kernel memory layout: 
167.
[    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB) 
168.
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB) 
169.
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB) 
170.
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB) 
171.
[    0.000000]       .init : 0xc078e000 - 0xc0815000   ( 540 kB) 
172.
[    0.000000]       .data : 0xc0575554 - 0xc078d308   (2143 kB) 
173.
[    0.000000]       .text : 0xc0100000 - 0xc0575554   (4565 kB) 
174.
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. 
175.
[    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 
176.
[    0.000000] NR_IRQS:2304 nr_irqs:256 
177.
[    0.000000] Fast TSC calibration using PIT 
178.
[    0.000000] Detected 598.494 MHz processor. 
179.
[    0.002549] Console: colour VGA+ 80x25 
180.
[    0.002559] console [tty0] enabled 
181.
[    0.004014] Calibrating delay loop (skipped), value calculated using timer frequency.. 1196.98 BogoMIPS (lpj=2393976) 
182.
[    0.004062] Security Framework initialized 
183.
[    0.004116] AppArmor: AppArmor initialized 
184.
[    0.004136] Mount-cache hash table entries: 512 
185.
[    0.004441] Initializing cgroup subsys ns 
186.
[    0.004452] Initializing cgroup subsys cpuacct 
187.
[    0.004465] Initializing cgroup subsys memory 
188.
[    0.004488] Initializing cgroup subsys freezer 
189.
[    0.004495] Initializing cgroup subsys net_cls 
190.
[    0.004531] CPU: L1 I cache: 32K, L1 D cache: 32K 
191.
[    0.004540] CPU: L2 cache: 2048K 
192.
[    0.004551] mce: CPU supports 5 MCE banks 
193.
[    0.004572] CPU0: Thermal monitoring enabled (TM1) 
194.
[    0.004591] Performance Counters: p6 PMU driver. 
195.
[    0.004611] ... version:                 0 
196.
[    0.004617] ... bit width:               32 
197.
[    0.004623] ... generic counters:        2 
198.
[    0.004630] ... value mask:              00000000ffffffff 
199.
[    0.004637] ... max period:              000000007fffffff 
200.
[    0.004643] ... fixed-purpose counters:  0 
201.
[    0.004649] ... counter mask:            0000000000000003 
202.
[    0.004660] Checking 'hlt' instruction... OK. 
203.
[    0.021820] SMP alternatives: switching to UP code 
204.
[    0.036021] Freeing SMP alternatives: 19k freed 
205.
[    0.036041] ACPI: Core revision 20090521 
206.
[    0.050428] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 
207.
[    0.090129] CPU0: Intel(R) Pentium(R) M processor 1.80GHz stepping 06 
208.
[    0.092001] Brought up 1 CPUs 
209.
[    0.092001] Total of 1 processors activated (1196.98 BogoMIPS). 
210.
[    0.092001] CPU0 attaching NULL sched-domain. 
211.
[    0.092001] Booting paravirtualized kernel on bare hardware 
212.
[    0.092001] regulator: core version 0.5 
213.
[    0.092001] Time: 19:08:27  Date: 05/09/10 
214.
[    0.092001] NET: Registered protocol family 16 
215.
[    0.092001] EISA bus registered 
216.
[    0.092001] ACPI: bus type pci registered 
217.
[    0.092001] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 
218.
[    0.092001] PCI: Not using MMCONFIG. 
219.
[    0.092001] PCI: PCI BIOS revision 2.10 entry at 0xfd4ab, last bus=4 
220.
[    0.092001] PCI: Using configuration type 1 for base access 
221.
[    0.093488] bio: create slab <bio-0> at 0 
222.
[    0.095279] ACPI: EC: Look up EC in DSDT 
223.
[    0.099376] ACPI Warning: Package List length (10) larger than NumElements count (1), truncated 
224.
[    0.099393]  20090521 dsobject-502 
225.
[    0.103373] ACPI: Interpreter enabled 
226.
[    0.103390] ACPI: (supports S0 S3 S4 S5) 
227.
[    0.103451] ACPI: Using IOAPIC for interrupt routing 
228.
[    0.103554] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 
229.
[    0.110406] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources 
230.
[    0.110415] PCI: Using MMCONFIG for extended config space 
231.
[    0.119500] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function 
232.
[    0.122028] ACPI: No dock devices found. 
233.
[    0.122246] ACPI: PCI Root Bridge [PCI0] (0000:00) 
234.
[    0.122478] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold 
235.
[    0.122488] pci 0000:00:01.0: PME# disabled 
236.
[    0.122600] pci 0000:00:1d.0: reg 20 io port: [0xcfe0-0xcfff] 
237.
[    0.122680] pci 0000:00:1d.1: reg 20 io port: [0xcf80-0xcf9f] 
238.
[    0.122760] pci 0000:00:1d.2: reg 20 io port: [0xcf60-0xcf7f] 
239.
[    0.122839] pci 0000:00:1d.3: reg 20 io port: [0xcf40-0xcf5f] 
240.
[    0.122929] pci 0000:00:1d.7: reg 10 32bit mmio: [0x000000-0x0003ff] 
241.
[    0.123006] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold 
242.
[    0.123017] pci 0000:00:1d.7: PME# disabled 
243.
[    0.123141] pci 0000:00:1e.2: reg 10 io port: [0x00-0xff] 
244.
[    0.123155] pci 0000:00:1e.2: reg 14 io port: [0x00-0x3f] 
245.
[    0.123170] pci 0000:00:1e.2: reg 18 32bit mmio: [0x000000-0x0001ff] 
246.
[    0.123185] pci 0000:00:1e.2: reg 1c 32bit mmio: [0x000000-0x0000ff] 
247.
[    0.123231] pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold 
248.
[    0.123242] pci 0000:00:1e.2: PME# disabled 
249.
[    0.123291] pci 0000:00:1e.3: reg 10 io port: [0x00-0xff] 
250.
[    0.123305] pci 0000:00:1e.3: reg 14 io port: [0x00-0x7f] 
251.
[    0.123362] pci 0000:00:1e.3: PME# supported from D0 D3hot D3cold 
252.
[    0.123373] pci 0000:00:1e.3: PME# disabled 
253.
[    0.123474] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 
254.
[    0.123490] pci 0000:00:1f.0: quirk: region d800-d87f claimed by ICH6 ACPI/GPIO/TCO 
255.
[    0.123501] pci 0000:00:1f.0: quirk: region eec0-eeff claimed by ICH6 GPIO 
256.
[    0.123512] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0680-06ff 
257.
[    0.123522] pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 01e0-01ef 
258.
[    0.123577] pci 0000:00:1f.2: reg 10 io port: [0xaff8-0xafff] 
259.
[    0.123591] pci 0000:00:1f.2: reg 14 io port: [0xaff4-0xaff7] 
260.
[    0.123606] pci 0000:00:1f.2: reg 18 io port: [0xafe8-0xafef] 
261.
[    0.123620] pci 0000:00:1f.2: reg 1c io port: [0xafe4-0xafe7] 
262.
[    0.123634] pci 0000:00:1f.2: reg 20 io port: [0xafa0-0xafaf] 
263.
[    0.123676] pci 0000:00:1f.2: PME# supported from D3hot 
264.
[    0.123686] pci 0000:00:1f.2: PME# disabled 
265.
[    0.123755] pci 0000:01:00.0: reg 10 32bit mmio: [0xcf000000-0xcfffffff] 
266.
[    0.123776] pci 0000:01:00.0: reg 14 64bit mmio: [0xb0000000-0xbfffffff] 
267.
[    0.123795] pci 0000:01:00.0: reg 1c 64bit mmio: [0xce000000-0xceffffff] 
268.
[    0.123815] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] 
269.
[    0.123916] pci 0000:00:01.0: bridge 32bit mmio: [0xce000000-0xcfffffff] 
270.
[    0.123927] pci 0000:00:01.0: bridge 32bit mmio pref: [0xb0000000-0xbfffffff] 
271.
[    0.124011] pci 0000:02:05.0: reg 10 32bit mmio: [0xcdfff000-0xcdffffff] 
272.
[    0.124087] pci 0000:02:05.0: PME# supported from D0 D3hot D3cold 
273.
[    0.124098] pci 0000:02:05.0: PME# disabled 
274.
[    0.124160] pci 0000:02:08.0: reg 10 32bit mmio: [0xcdffe000-0xcdffefff] 
275.
[    0.124177] pci 0000:02:08.0: reg 14 io port: [0xbf40-0xbf7f] 
276.
[    0.124241] pci 0000:02:08.0: supports D1 D2 
277.
[    0.124249] pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold 
278.
[    0.124259] pci 0000:02:08.0: PME# disabled 
279.
[    0.124317] pci 0000:02:09.0: reg 10 32bit mmio: [0x000000-0x3ffffff] 
280.
[    0.124443] pci 0000:02:0b.0: reg 10 32bit mmio: [0x000000-0x000fff] 
281.
[    0.124477] pci 0000:02:0b.0: supports D1 D2 
282.
[    0.124484] pci 0000:02:0b.0: PME# supported from D0 D1 D2 D3hot 
283.
[    0.124495] pci 0000:02:0b.0: PME# disabled 
284.
[    0.124554] pci 0000:02:0b.2: reg 10 32bit mmio: [0x000000-0x0007ff] 
285.
[    0.124571] pci 0000:02:0b.2: reg 14 32bit mmio: [0x000000-0x003fff] 
286.
[    0.124643] pci 0000:02:0b.2: supports D1 D2 
287.
[    0.124651] pci 0000:02:0b.2: PME# supported from D0 D1 D2 D3hot 
288.
[    0.124661] pci 0000:02:0b.2: PME# disabled 
289.
[    0.124729] pci 0000:02:0b.3: reg 10 32bit mmio: [0x000000-0x001fff] 
290.
[    0.124802] pci 0000:02:0b.3: supports D1 D2 
291.
[    0.124809] pci 0000:02:0b.3: PME# supported from D0 D1 D2 D3hot 
292.
[    0.124820] pci 0000:02:0b.3: PME# disabled 
293.
[    0.124876] pci 0000:02:0b.4: reg 10 32bit mmio: [0x000000-0x0000ff] 
294.
[    0.124893] pci 0000:02:0b.4: reg 14 32bit mmio: [0x000000-0x0000ff] 
295.
[    0.124908] pci 0000:02:0b.4: reg 18 32bit mmio: [0x000000-0x0000ff] 
296.
[    0.124968] pci 0000:02:0b.4: supports D1 D2 
297.
[    0.124975] pci 0000:02:0b.4: PME# supported from D0 D1 D2 D3hot 
298.
[    0.124986] pci 0000:02:0b.4: PME# disabled 
299.
[    0.125041] pci 0000:00:1e.0: transparent bridge 
300.
[    0.125052] pci 0000:00:1e.0: bridge io port: [0xb000-0xbfff] 
301.
[    0.125063] pci 0000:00:1e.0: bridge 32bit mmio: [0xcdf00000-0xcdffffff] 
302.
[    0.125116] pci_bus 0000:00: on NUMA node 0 
303.
[    0.125128] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] 
304.
[    0.125402] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] 
305.
[    0.125814] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] 
306.
[    0.131543] ACPI: PCI Interrupt Link [LNKA] (IRQs *10) 
307.
[    0.131900] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11) 
308.
[    0.132274] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *11) 
309.
[    0.132630] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11) 
310.
[    0.132985] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *11) 
311.
[    0.133340] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11) 
312.
[    0.133695] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *11) 
313.
[    0.134049] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11) 
314.
[    0.134562] SCSI subsystem initialized 
315.
[    0.134671] libata version 3.00 loaded. 
316.
[    0.134873] usbcore: registered new interface driver usbfs 
317.
[    0.134927] usbcore: registered new interface driver hub 
318.
[    0.135000] usbcore: registered new device driver usb 
319.
[    0.135367] ACPI: WMI: Mapper loaded 
320.
[    0.135374] PCI: Using ACPI for IRQ routing 
321.
[    0.135769] Bluetooth: Core ver 2.15 
322.
[    0.135843] NET: Registered protocol family 31 
323.
[    0.135850] Bluetooth: HCI device and connection manager initialized 
324.
[    0.135858] Bluetooth: HCI socket layer initialized 
325.
[    0.135864] NetLabel: Initializing 
326.
[    0.135870] NetLabel:  domain hash size = 128 
327.
[    0.135875] NetLabel:  protocols = UNLABELED CIPSOv4 
328.
[    0.135913] NetLabel:  unlabeled traffic allowed by default 
329.
[    0.136356] hpet clockevent registered 
330.
[    0.136365] HPET: 3 timers in total, 0 timers will be used for per-cpu timer 
331.
[    0.136378] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 
332.
[    0.136394] hpet0: 3 comparators, 64-bit 14.318180 MHz counter 
333.
[    0.144778] pnp: PnP ACPI init 
334.
[    0.144805] ACPI: bus type pnp registered 
335.
[    0.147799] pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:02:09.0 BAR 0 (0x0-0x3ffffff), disabling 
336.
[    0.147813] pnp 00:00: mem resource (0xe0000-0xfffff) overlaps 0000:02:09.0 BAR 0 (0x0-0x3ffffff), disabling 
337.
[    0.147826] pnp 00:00: mem resource (0x100000-0x3ffaffff) overlaps 0000:02:09.0 BAR 0 (0x0-0x3ffffff), disabling 
338.
[    0.152930] pnp 00:09: io resource (0x80-0x80) overlaps 0000:00:1e.2 BAR 0 (0x0-0xff), disabling 
339.
[    0.152944] pnp 00:09: io resource (0x84-0x86) overlaps 0000:00:1e.2 BAR 0 (0x0-0xff), disabling 
340.
[    0.152956] pnp 00:09: io resource (0x88-0x88) overlaps 0000:00:1e.2 BAR 0 (0x0-0xff), disabling 
341.
[    0.152968] pnp 00:09: io resource (0x8c-0x8e) overlaps 0000:00:1e.2 BAR 0 (0x0-0xff), disabling 
342.
[    0.152980] pnp 00:09: io resource (0x2e-0x2f) overlaps 0000:00:1e.2 BAR 0 (0x0-0xff), disabling 
343.
[    0.152992] pnp 00:09: io resource (0x62-0x62) overlaps 0000:00:1e.2 BAR 0 (0x0-0xff), disabling 
344.
[    0.153004] pnp 00:09: io resource (0x66-0x66) overlaps 0000:00:1e.2 BAR 0 (0x0-0xff), disabling 
345.
[    0.153019] pnp 00:09: io resource (0x10-0x1f) overlaps 0000:00:1e.2 BAR 0 (0x0-0xff), disabling 
346.
[    0.153031] pnp 00:09: io resource (0x24-0x25) overlaps 0000:00:1e.2 BAR 0 (0x0-0xff), disabling 
347.
[    0.153043] pnp 00:09: io resource (0x28-0x29) overlaps 0000:00:1e.2 BAR 0 (0x0-0xff), disabling 
348.
[    0.153055] pnp 00:09: io resource (0x2c-0x2d) overlaps 0000:00:1e.2 BAR 0 (0x0-0xff), disabling 
349.
[    0.153067] pnp 00:09: io resource (0x30-0x31) overlaps 0000:00:1e.2 BAR 0 (0x0-0xff), disabling 
350.
[    0.153079] pnp 00:09: io resource (0x34-0x35) overlaps 0000:00:1e.2 BAR 0 (0x0-0xff), disabling 
351.
[    0.153091] pnp 00:09: io resource (0x38-0x39) overlaps 0000:00:1e.2 BAR 0 (0x0-0xff), disabling 
352.
[    0.153103] pnp 00:09: io resource (0x3c-0x3d) overlaps 0000:00:1e.2 BAR 0 (0x0-0xff), disabling 
353.
[    0.153115] pnp 00:09: io resource (0x50-0x53) overlaps 0000:00:1e.2 BAR 0 (0x0-0xff), disabling 
354.
[    0.153127] pnp 00:09: io resource (0x63-0x63) overlaps 0000:00:1e.2 BAR 0 (0x0-0xff), disabling 
355.
[    0.153139] pnp 00:09: io resource (0x65-0x65) overlaps 0000:00:1e.2 BAR 0 (0x0-0xff), disabling 
356.
[    0.153151] pnp 00:09: io resource (0x72-0x77) overlaps 0000:00:1e.2 BAR 0 (0x0-0xff), disabling 
357.
[    0.153163] pnp 00:09: io resource (0x90-0x9f) overlaps 0000:00:1e.2 BAR 0 (0x0-0xff), disabling 
358.
[    0.153176] pnp 00:09: io resource (0xa4-0xa5) overlaps 0000:00:1e.2 BAR 0 (0x0-0xff), disabling 
359.
[    0.153188] pnp 00:09: io resource (0xa8-0xa9) overlaps 0000:00:1e.2 BAR 0 (0x0-0xff), disabling 
360.
[    0.153200] pnp 00:09: io resource (0xac-0xad) overlaps 0000:00:1e.2 BAR 0 (0x0-0xff), disabling 
361.
[    0.153212] pnp 00:09: io resource (0xb0-0xb5) overlaps 0000:00:1e.2 BAR 0 (0x0-0xff), disabling 
362.
[    0.153224] pnp 00:09: io resource (0xb8-0xb9) overlaps 0000:00:1e.2 BAR 0 (0x0-0xff), disabling 
363.
[    0.153236] pnp 00:09: io resource (0xbc-0xbd) overlaps 0000:00:1e.2 BAR 0 (0x0-0xff), disabling 
364.
[    0.153250] pnp 00:09: io resource (0x2e-0x2f) overlaps 0000:00:1e.2 BAR 1 (0x0-0x3f), disabling 
365.
[    0.153265] pnp 00:09: io resource (0x10-0x1f) overlaps 0000:00:1e.2 BAR 1 (0x0-0x3f), disabling 
366.
[    0.153277] pnp 00:09: io resource (0x24-0x25) overlaps 0000:00:1e.2 BAR 1 (0x0-0x3f), disabling 
367.
[    0.153289] pnp 00:09: io resource (0x28-0x29) overlaps 0000:00:1e.2 BAR 1 (0x0-0x3f), disabling 
368.
[    0.153301] pnp 00:09: io resource (0x2c-0x2d) overlaps 0000:00:1e.2 BAR 1 (0x0-0x3f), disabling 
369.
[    0.153313] pnp 00:09: io resource (0x30-0x31) overlaps 0000:00:1e.2 BAR 1 (0x0-0x3f), disabling 
370.
[    0.153325] pnp 00:09: io resource (0x34-0x35) overlaps 0000:00:1e.2 BAR 1 (0x0-0x3f), disabling 
371.
[    0.153337] pnp 00:09: io resource (0x38-0x39) overlaps 0000:00:1e.2 BAR 1 (0x0-0x3f), disabling 
372.
[    0.153349] pnp 00:09: io resource (0x3c-0x3d) overlaps 0000:00:1e.2 BAR 1 (0x0-0x3f), disabling 
373.
[    0.153369] pnp 00:09: io resource (0x80-0x80) overlaps 0000:00:1e.3 BAR 0 (0x0-0xff), disabling 
374.
[    0.153381] pnp 00:09: io resource (0x84-0x86) overlaps 0000:00:1e.3 BAR 0 (0x0-0xff), disabling 
375.
[    0.153393] pnp 00:09: io resource (0x88-0x88) overlaps 0000:00:1e.3 BAR 0 (0x0-0xff), disabling 
376.
[    0.153405] pnp 00:09: io resource (0x8c-0x8e) overlaps 0000:00:1e.3 BAR 0 (0x0-0xff), disabling 
377.
[    0.153416] pnp 00:09: io resource (0x2e-0x2f) overlaps 0000:00:1e.3 BAR 0 (0x0-0xff), disabling 
378.
[    0.153428] pnp 00:09: io resource (0x62-0x62) overlaps 0000:00:1e.3 BAR 0 (0x0-0xff), disabling 
379.
[    0.153440] pnp 00:09: io resource (0x66-0x66) overlaps 0000:00:1e.3 BAR 0 (0x0-0xff), disabling 
380.
[    0.153455] pnp 00:09: io resource (0x10-0x1f) overlaps 0000:00:1e.3 BAR 0 (0x0-0xff), disabling 
381.
[    0.153467] pnp 00:09: io resource (0x24-0x25) overlaps 0000:00:1e.3 BAR 0 (0x0-0xff), disabling 
382.
[    0.153479] pnp 00:09: io resource (0x28-0x29) overlaps 0000:00:1e.3 BAR 0 (0x0-0xff), disabling 
383.
[    0.153491] pnp 00:09: io resource (0x2c-0x2d) overlaps 0000:00:1e.3 BAR 0 (0x0-0xff), disabling 
384.
[    0.153503] pnp 00:09: io resource (0x30-0x31) overlaps 0000:00:1e.3 BAR 0 (0x0-0xff), disabling 
385.
[    0.153515] pnp 00:09: io resource (0x34-0x35) overlaps 0000:00:1e.3 BAR 0 (0x0-0xff), disabling 
386.
[    0.153527] pnp 00:09: io resource (0x38-0x39) overlaps 0000:00:1e.3 BAR 0 (0x0-0xff), disabling 
387.
[    0.153539] pnp 00:09: io resource (0x3c-0x3d) overlaps 0000:00:1e.3 BAR 0 (0x0-0xff), disabling 
388.
[    0.153551] pnp 00:09: io resource (0x50-0x53) overlaps 0000:00:1e.3 BAR 0 (0x0-0xff), disabling 
389.
[    0.153563] pnp 00:09: io resource (0x63-0x63) overlaps 0000:00:1e.3 BAR 0 (0x0-0xff), disabling 
390.
[    0.153575] pnp 00:09: io resource (0x65-0x65) overlaps 0000:00:1e.3 BAR 0 (0x0-0xff), disabling 
391.
[    0.153587] pnp 00:09: io resource (0x72-0x77) overlaps 0000:00:1e.3 BAR 0 (0x0-0xff), disabling 
392.
[    0.153600] pnp 00:09: io resource (0x90-0x9f) overlaps 0000:00:1e.3 BAR 0 (0x0-0xff), disabling 
393.
[    0.153612] pnp 00:09: io resource (0xa4-0xa5) overlaps 0000:00:1e.3 BAR 0 (0x0-0xff), disabling 
394.
[    0.153624] pnp 00:09: io resource (0xa8-0xa9) overlaps 0000:00:1e.3 BAR 0 (0x0-0xff), disabling 
395.
[    0.153636] pnp 00:09: io resource (0xac-0xad) overlaps 0000:00:1e.3 BAR 0 (0x0-0xff), disabling 
396.
[    0.153648] pnp 00:09: io resource (0xb0-0xb5) overlaps 0000:00:1e.3 BAR 0 (0x0-0xff), disabling 
397.
[    0.153660] pnp 00:09: io resource (0xb8-0xb9) overlaps 0000:00:1e.3 BAR 0 (0x0-0xff), disabling 
398.
[    0.153672] pnp 00:09: io resource (0xbc-0xbd) overlaps 0000:00:1e.3 BAR 0 (0x0-0xff), disabling 
399.
[    0.153686] pnp 00:09: io resource (0x2e-0x2f) overlaps 0000:00:1e.3 BAR 1 (0x0-0x7f), disabling 
400.
[    0.153697] pnp 00:09: io resource (0x62-0x62) overlaps 0000:00:1e.3 BAR 1 (0x0-0x7f), disabling 
401.
[    0.153709] pnp 00:09: io resource (0x66-0x66) overlaps 0000:00:1e.3 BAR 1 (0x0-0x7f), disabling 
402.
[    0.153725] pnp 00:09: io resource (0x10-0x1f) overlaps 0000:00:1e.3 BAR 1 (0x0-0x7f), disabling 
403.
[    0.153737] pnp 00:09: io resource (0x24-0x25) overlaps 0000:00:1e.3 BAR 1 (0x0-0x7f), disabling 
404.
[    0.153749] pnp 00:09: io resource (0x28-0x29) overlaps 0000:00:1e.3 BAR 1 (0x0-0x7f), disabling 
405.
[    0.153761] pnp 00:09: io resource (0x2c-0x2d) overlaps 0000:00:1e.3 BAR 1 (0x0-0x7f), disabling 
406.
[    0.153773] pnp 00:09: io resource (0x30-0x31) overlaps 0000:00:1e.3 BAR 1 (0x0-0x7f), disabling 
407.
[    0.153785] pnp 00:09: io resource (0x34-0x35) overlaps 0000:00:1e.3 BAR 1 (0x0-0x7f), disabling 
408.
[    0.153797] pnp 00:09: io resource (0x38-0x39) overlaps 0000:00:1e.3 BAR 1 (0x0-0x7f), disabling 
409.
[    0.153809] pnp 00:09: io resource (0x3c-0x3d) overlaps 0000:00:1e.3 BAR 1 (0x0-0x7f), disabling 
410.
[    0.153821] pnp 00:09: io resource (0x50-0x53) overlaps 0000:00:1e.3 BAR 1 (0x0-0x7f), disabling 
411.
[    0.153833] pnp 00:09: io resource (0x63-0x63) overlaps 0000:00:1e.3 BAR 1 (0x0-0x7f), disabling 
412.
[    0.153845] pnp 00:09: io resource (0x65-0x65) overlaps 0000:00:1e.3 BAR 1 (0x0-0x7f), disabling 
413.
[    0.153857] pnp 00:09: io resource (0x72-0x77) overlaps 0000:00:1e.3 BAR 1 (0x0-0x7f), disabling 
414.
[    0.154462] pnp: PnP ACPI: found 10 devices 
415.
[    0.154469] ACPI: ACPI bus type pnp unregistered 
416.
[    0.154478] PnPBIOS: Disabled by ACPI PNP 
417.
[    0.154508] system 00:00: iomem range 0x3ffb0000-0x3ffbffff could not be reserved 
418.
[    0.154519] system 00:00: iomem range 0x3ffc0000-0x3fffffff has been reserved 
419.
[    0.154530] system 00:00: iomem range 0xf0000000-0xf0003fff has been reserved 
420.
[    0.154541] system 00:00: iomem range 0xf0008000-0xf000bfff has been reserved 
421.
[    0.154551] system 00:00: iomem range 0xf0004000-0xf0004fff has been reserved 
422.
[    0.154562] system 00:00: iomem range 0xf0005000-0xf0005fff has been reserved 
423.
[    0.154572] system 00:00: iomem range 0xfeda0000-0xfedbffff has been reserved 
424.
[    0.154584] system 00:00: iomem range 0xfec00000-0xfec7ffff could not be reserved 
425.
[    0.154594] system 00:00: iomem range 0xfec80000-0xfecfffff has been reserved 
426.
[    0.154605] system 00:00: iomem range 0xfed13000-0xfed13fff has been reserved 
427.
[    0.154616] system 00:00: iomem range 0xfed20000-0xfed8ffff has been reserved 
428.
[    0.154626] system 00:00: iomem range 0xfee00000-0xfeefffff has been reserved 
429.
[    0.154637] system 00:00: iomem range 0xffb00000-0xffbfffff has been reserved 
430.
[    0.154648] system 00:00: iomem range 0xffe80000-0xffffffff has been reserved 
431.
[    0.154666] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved 
432.
[    0.154691] system 00:09: ioport range 0x1e0-0x1ef has been reserved 
433.
[    0.154702] system 00:09: ioport range 0x480-0x48f has been reserved 
434.
[    0.154712] system 00:09: ioport range 0xe000-0xe07f has been reserved 
435.
[    0.154722] system 00:09: ioport range 0xe080-0xe0ff has been reserved 
436.
[    0.154732] system 00:09: ioport range 0xe400-0xe47f has been reserved 
437.
[    0.154742] system 00:09: ioport range 0xe480-0xe4ff has been reserved 
438.
[    0.154753] system 00:09: ioport range 0xe800-0xe87f has been reserved 
439.
[    0.154763] system 00:09: ioport range 0xe880-0xe8ff has been reserved 
440.
[    0.154773] system 00:09: ioport range 0xec00-0xec7f has been reserved 
441.
[    0.154783] system 00:09: ioport range 0xec80-0xecff has been reserved 
442.
[    0.154794] system 00:09: ioport range 0xd800-0xd87f has been reserved 
443.
[    0.154804] system 00:09: ioport range 0xd880-0xd89f has been reserved 
444.
[    0.154814] system 00:09: ioport range 0xeeb0-0xeebf has been reserved 
445.
[    0.154825] system 00:09: ioport range 0xeec0-0xeeff has been reserved 
446.
[    0.154835] system 00:09: ioport range 0x680-0x6ff has been reserved 
447.
[    0.154852] system 00:09: ioport range 0x4d0-0x4d1 has been reserved 
448.
[    0.189804] AppArmor: AppArmor Filesystem Enabled 
449.
[    0.189910] pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xc0000000-0xbfffffff] 
450.
[    0.189921] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 
451.
[    0.189928] pci 0000:00:01.0:   IO window: disabled 
452.
[    0.189940] pci 0000:00:01.0:   MEM window: 0xce000000-0xcfffffff 
453.
[    0.189951] pci 0000:00:01.0:   PREFETCH window: 0xb0000000-0xbfffffff 
454.
[    0.190005] pci 0000:02:0b.0: CardBus bridge, secondary bus 0000:03 
455.
[    0.190014] pci 0000:02:0b.0:   IO window: 0x00b000-0x00b0ff 
456.
[    0.190026] pci 0000:02:0b.0:   IO window: 0x00b400-0x00b4ff 
457.
[    0.190039] pci 0000:02:0b.0:   PREFETCH window: 0x44000000-0x47ffffff 
458.
[    0.190051] pci 0000:02:0b.0:   MEM window: 0x4c000000-0x4fffffff 
459.
[    0.190063] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 
460.
[    0.190073] pci 0000:00:1e.0:   IO window: 0xb000-0xbfff 
461.
[    0.190085] pci 0000:00:1e.0:   MEM window: 0xcdf00000-0xcdffffff 
462.
[    0.190096] pci 0000:00:1e.0:   PREFETCH window: 0x40000000-0x47ffffff 
463.
[    0.190119]   alloc irq_desc for 16 on node -1 
464.
[    0.190126]   alloc kstat_irqs on node -1 
465.
[    0.190142] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 
466.
[    0.190153] pci 0000:00:01.0: setting latency timer to 64 
467.
[    0.190168] pci 0000:00:1e.0: setting latency timer to 64 
468.
[    0.190185] pci 0000:02:0b.0: enabling device (0000 -> 0003) 
469.
[    0.190195]   alloc irq_desc for 21 on node -1 
470.
[    0.190201]   alloc kstat_irqs on node -1 
471.
[    0.190212] pci 0000:02:0b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 
472.
[    0.190229] pci_bus 0000:00: resource 0 io:  [0x00-0xffff] 
473.
[    0.190238] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] 
474.
[    0.190248] pci_bus 0000:01: resource 1 mem: [0xce000000-0xcfffffff] 
475.
[    0.190258] pci_bus 0000:01: resource 2 pref mem [0xb0000000-0xbfffffff] 
476.
[    0.190268] pci_bus 0000:02: resource 0 io:  [0xb000-0xbfff] 
477.
[    0.190277] pci_bus 0000:02: resource 1 mem: [0xcdf00000-0xcdffffff] 
478.
[    0.190287] pci_bus 0000:02: resource 2 pref mem [0x40000000-0x47ffffff] 
479.
[    0.190296] pci_bus 0000:02: resource 3 io:  [0x00-0xffff] 
480.
[    0.190305] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff] 
481.
[    0.190314] pci_bus 0000:03: resource 0 io:  [0xb000-0xb0ff] 
482.
[    0.190323] pci_bus 0000:03: resource 1 io:  [0xb400-0xb4ff] 
483.
[    0.190333] pci_bus 0000:03: resource 2 pref mem [0x44000000-0x47ffffff] 
484.
[    0.190342] pci_bus 0000:03: resource 3 mem: [0x4c000000-0x4fffffff] 
485.
[    0.190432] NET: Registered protocol family 2 
486.
[    0.190688] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) 
487.
[    0.191552] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) 
488.
[    0.193560] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) 
489.
[    0.194556] TCP: Hash tables configured (established 131072 bind 65536) 
490.
[    0.194564] TCP reno registered 
491.
[    0.194765] NET: Registered protocol family 1 
492.
[    0.194919] Trying to unpack rootfs image as initramfs... 
493.
[    0.640058] Switched to high resolution mode on CPU 0 
494.
[    5.194212] Freeing initrd memory: 5617k freed 
495.
[    5.201115] Simple Boot Flag at 0x7c set to 0x1 
496.
[    5.201323] cpufreq-nforce2: No nForce2 chipset. 
497.
[    5.201407] Scanning for low memory corruption every 60 seconds 
498.
[    5.201721] audit: initializing netlink socket (disabled) 
499.
[    5.201770] type=2000 audit(1273432111.200:1): initialized 
500.
[    5.230893] highmem bounce pool size: 64 pages 
501.
[    5.230909] HugeTLB registered 4 MB page size, pre-allocated 0 pages 
502.
[    5.235597] VFS: Disk quotas dquot_6.5.2 
503.
[    5.235770] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) 
504.
[    5.237689] fuse init (API version 7.12) 
505.
[    5.237957] msgmni has been set to 1732 
506.
[    5.238479] alg: No test for stdrng (krng) 
507.
[    5.238516] io scheduler noop registered 
508.
[    5.238523] io scheduler anticipatory registered 
509.
[    5.238618] io scheduler deadline registered 
510.
[    5.238760] io scheduler cfq registered (default) 
511.
[    5.238898] pci 0000:01:00.0: Boot video device 
512.
[    5.238935] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling 
513.
[    5.239213]   alloc irq_desc for 24 on node -1 
514.
[    5.239220]   alloc kstat_irqs on node -1 
515.
[    5.239241] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X 
516.
[    5.239257] pcieport-driver 0000:00:01.0: setting latency timer to 64 
517.
[    5.239438] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 
518.
[    5.239514] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 
519.
[    5.239895] ACPI: AC Adapter [ADP1] (on-line) 
520.
[    5.240090] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 
521.
[    5.240101] ACPI: Power Button [PWRF] 
522.
[    5.240262] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 
523.
[    5.240356] ACPI: Lid Switch [LID] 
524.
[    5.240495] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 
525.
[    5.240508] ACPI: Power Button [PWRB] 
526.
[    5.241028] Marking TSC unstable due to TSC halts in idle 
527.
[    5.241065] ACPI: CPU0 (power states: C1[C1] C2[C2]) 
528.
[    5.241132] processor LNXCPU:00: registered as cooling_device0 
529.
[    5.245064] thermal LNXTHERM:01: registered as thermal_zone0 
530.
[    5.245091] ACPI: Thermal Zone [THRM] (41 C) 
531.
[    5.245219] isapnp: Scanning for PnP cards... 
532.
[    5.294407] ACPI: Battery Slot [BAT1] (battery absent) 
533.
[    5.598940] isapnp: No Plug & Play device found 
534.
[    5.602275] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled 
535.
[    5.603347] serial 0000:00:1e.3: power state changed by ACPI to D0 
536.
[    5.603362] serial 0000:00:1e.3: enabling device (0000 -> 0001) 
537.
[    5.603378]   alloc irq_desc for 20 on node -1 
538.
[    5.603384]   alloc kstat_irqs on node -1 
539.
[    5.603400] serial 0000:00:1e.3: PCI INT B -> GSI 20 (level, low) -> IRQ 20 
540.
[    5.603412] serial 0000:00:1e.3: PCI INT B disabled 
541.
[    5.606277] brd: module loaded 
542.
[    5.607663] loop: module loaded 
543.
[    5.607874] input: Macintosh mouse button emulation as /devices/virtual/input/input3 
544.
[    5.608116] ahci 0000:00:1f.2: version 3.0 
545.
[    5.608137]   alloc irq_desc for 19 on node -1 
546.
[    5.608143]   alloc kstat_irqs on node -1 
547.
[    5.608157] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 
548.
[    5.608182] ahci 0000:00:1f.2: PCI INT B disabled 
549.
[    5.608194] ahci: probe of 0000:00:1f.2 failed with error -22 
550.
[    5.608309] ata_piix 0000:00:1f.2: version 2.13 
551.
[    5.608326] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 
552.
[    5.608338] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] 
553.
[    5.764043] ata_piix 0000:00:1f.2: setting latency timer to 64 
554.
[    5.764174] scsi0 : ata_piix 
555.
[    5.764376] scsi1 : ata_piix 
556.
[    5.765846] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xafa0 irq 14 
557.
[    5.765857] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xafa8 irq 15 
558.
[    5.768718] Fixed MDIO Bus: probed 
559.
[    5.768828] PPP generic driver version 2.4.2 
560.
[    5.769067] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver 
561.
[    5.769105] ehci_hcd 0000:00:1d.7: enabling device (0000 -> 0002) 
562.
[    5.769117]   alloc irq_desc for 23 on node -1 
563.
[    5.769124]   alloc kstat_irqs on node -1 
564.
[    5.769138] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 
565.
[    5.769165] ehci_hcd 0000:00:1d.7: setting latency timer to 64 
566.
[    5.769175] ehci_hcd 0000:00:1d.7: EHCI Host Controller 
567.
[    5.769294] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 
568.
[    5.773248] ehci_hcd 0000:00:1d.7: debug port 1 
569.
[    5.773261] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported 
570.
[    5.773295] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x48000000 
571.
[    5.788028] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 
572.
[    5.788232] usb usb1: configuration #1 chosen from 1 choice 
573.
[    5.788323] hub 1-0:1.0: USB hub found 
574.
[    5.788344] hub 1-0:1.0: 8 ports detected 
575.
[    5.788510] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver 
576.
[    5.788564] uhci_hcd: USB Universal Host Controller Interface driver 
577.
[    5.788620] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 
578.
[    5.788636] uhci_hcd 0000:00:1d.0: setting latency timer to 64 
579.
[    5.788645] uhci_hcd 0000:00:1d.0: UHCI Host Controller 
580.
[    5.788740] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 
581.
[    5.788780] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000cfe0 
582.
[    5.789022] usb usb2: configuration #1 chosen from 1 choice 
583.
[    5.789104] hub 2-0:1.0: USB hub found 
584.
[    5.789124] hub 2-0:1.0: 2 ports detected 
585.
[    5.789249] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 
586.
[    5.789264] uhci_hcd 0000:00:1d.1: setting latency timer to 64 
587.
[    5.789273] uhci_hcd 0000:00:1d.1: UHCI Host Controller 
588.
[    5.789358] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 
589.
[    5.789414] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000cf80 
590.
[    5.789631] usb usb3: configuration #1 chosen from 1 choice 
591.
[    5.789713] hub 3-0:1.0: USB hub found 
592.
[    5.789731] hub 3-0:1.0: 2 ports detected 
593.
[    5.789849]   alloc irq_desc for 18 on node -1 
594.
[    5.789856]   alloc kstat_irqs on node -1 
595.
[    5.789868] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 
596.
[    5.789883] uhci_hcd 0000:00:1d.2: setting latency timer to 64 
597.
[    5.789892] uhci_hcd 0000:00:1d.2: UHCI Host Controller 
598.
[    5.789987] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 
599.
[    5.790039] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000cf60 
600.
[    5.790281] usb usb4: configuration #1 chosen from 1 choice 
601.
[    5.790368] hub 4-0:1.0: USB hub found 
602.
[    5.790386] hub 4-0:1.0: 2 ports detected 
603.
[    5.790493] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 
604.
[    5.790508] uhci_hcd 0000:00:1d.3: setting latency timer to 64 
605.
[    5.790517] uhci_hcd 0000:00:1d.3: UHCI Host Controller 
606.
[    5.790600] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 
607.
[    5.790652] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000cf40 
608.
[    5.790860] usb usb5: configuration #1 chosen from 1 choice 
609.
[    5.790946] hub 5-0:1.0: USB hub found 
610.
[    5.790965] hub 5-0:1.0: 2 ports detected 
611.
[    5.791215] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 
612.
[    5.796498] serio: i8042 KBD port at 0x60,0x64 irq 1 
613.
[    5.796515] serio: i8042 AUX port at 0x60,0x64 irq 12 
614.
[    5.796672] mice: PS/2 mouse device common for all mice 
615.
[    5.797024] rtc_cmos 00:08: RTC can wake from S4 
616.
[    5.797111] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 
617.
[    5.797150] rtc0: alarms up to one year, 114 bytes nvram, hpet irqs 
618.
[    5.797445] device-mapper: uevent: version 1.0.3 
619.
[    5.797673] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com 
620.
[    5.797868] device-mapper: multipath: version 1.1.0 loaded 
621.
[    5.797877] device-mapper: multipath round-robin: version 1.0.0 loaded 
622.
[    5.798191] EISA: Probing bus 0 at eisa.0 
623.
[    5.798204] Cannot allocate resource for EISA slot 1 
624.
[    5.798244] EISA: Detected 0 cards. 
625.
[    5.798438] cpuidle: using governor ladder 
626.
[    5.798581] cpuidle: using governor menu 
627.
[    5.800128] TCP cubic registered 
628.
[    5.800652] NET: Registered protocol family 10 
629.
[    5.801884] lo: Disabled Privacy Extensions 
630.
[    5.802814] NET: Registered protocol family 17 
631.
[    5.802863] Bluetooth: L2CAP ver 2.13 
632.
[    5.802869] Bluetooth: L2CAP socket layer initialized 
633.
[    5.802877] Bluetooth: SCO (Voice Link) ver 0.6 
634.
[    5.802883] Bluetooth: SCO socket layer initialized 
635.
[    5.802953] Bluetooth: RFCOMM TTY layer initialized 
636.
[    5.802962] Bluetooth: RFCOMM socket layer initialized 
637.
[    5.802968] Bluetooth: RFCOMM ver 1.11 
638.
[    5.803152] Using IPI No-Shortcut mode 
639.
[    5.803332] PM: Resume from disk failed. 
640.
[    5.803361] registered taskstats version 1 
641.
[    5.803669]   Magic number: 10:748:141 
642.
[    5.803693] block ram6: hash matches 
643.
[    5.803737] acpi device:12: hash matches 
644.
[    5.803792] rtc_cmos 00:08: setting system clock to 2010-05-09 19:08:32 UTC (1273432112) 
645.
[    5.803802] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found 
646.
[    5.803808] EDD information not available. 
647.
[    5.818079] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 
648.
[    5.924252] ata2.01: NODEV after polling detection 
649.
[    5.932496] ata2.00: ATAPI: MATSHITADVD-RAM UJ-820S, 1.00, max UDMA/33 
650.
[    5.948453] ata2.00: configured for UDMA/33 
651.
[   10.964032] ata1: link is slow to respond, please be patient (ready=0) 
652.
[   15.780032] ata1: SRST failed (errno=-16) 
653.
[   20.976031] ata1: link is slow to respond, please be patient (ready=0) 
654.
[   25.792032] ata1: SRST failed (errno=-16) 
655.
[   30.988031] ata1: link is slow to respond, please be patient (ready=0) 
656.
[   60.836038] ata1: SRST failed (errno=-16) 
657.
[   65.864032] ata1: SRST failed (errno=-16) 
658.
[   65.864039] ata1: reset failed, giving up 
659.
[   65.866035] scsi 1:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ-820S  1.00 PQ: 0 ANSI: 5 
660.
[   65.867762] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray 
661.
[   65.867772] Uniform CD-ROM driver Revision: 3.20 
662.
[   65.867994] sr 1:0:0:0: Attached scsi CD-ROM sr0 
663.
[   65.868156] sr 1:0:0:0: Attached scsi generic sg0 type 5 
664.
[   65.868206] Freeing unused kernel memory: 540k freed 
665.
[   65.868966] Write protecting the kernel text: 4568k 
666.
[   65.869085] Write protecting the kernel read-only data: 1836k 
667.
[   66.382021] Linux agpgart interface v0.103 
668.
[   66.560271] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function 
669.
[   66.560920] acpi device:1e: registered as cooling_device1 
670.
[   66.561310] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:1c/device:1d/input/input5 
671.
[   66.561415] ACPI: Video Device [VGA] (multi-head: yes  rom: yes  post: no) 
672.
[   66.606592] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI 
673.
[   66.606602] e100: Copyright(c) 1999-2006 Intel Corporation 
674.
[   66.606727] e100 0000:02:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 
675.
[   66.632440] e100 0000:02:08.0: PME# disabled 
676.
[   66.672642] e100: eth0: e100_probe: addr 0xcdffe000, irq 20, MAC addr 00:0e:7b:18:ae:ef 
677.
[   66.690318] ohci1394 0000:02:0b.2: enabling device (0000 -> 0002) 
678.
[   66.690339] ohci1394 0000:02:0b.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20 
679.
[   66.744091] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20]  MMIO=[cdf07000-cdf077ff]  Max Packet=[2048]  IR/IT contexts=[4/8] 
680.
[   67.783107] xor: automatically using best checksumming function: pIII_sse 
681.
[   67.800015]    pIII_sse  :  1554.000 MB/sec 
682.
[   67.800023] xor: using function: pIII_sse (1554.000 MB/sec) 
683.
[   67.828527] device-mapper: dm-raid45: initialized v0.2594b 
684.
[   68.020314] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0000390000a1cac7] 
685.
[   75.389732] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE 
686.
[   75.389748] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]  
687.
[   75.389763] Info fld=0x530ea 
688.
[   75.389769] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track 
689.
[   75.389789] end_request: I/O error, dev sr0, sector 1360808 
690.
[   75.389800] Buffer I/O error on device sr0, logical block 340202 
691.
[   75.965140] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE 
692.
[   75.965152] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]  
693.
[   75.965165] Info fld=0x530ea 
694.
[   75.965171] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track 
695.
[   75.965189] end_request: I/O error, dev sr0, sector 1360808 
696.
[   75.965198] Buffer I/O error on device sr0, logical block 340202 
697.
[   76.170010] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE 
698.
[   76.170023] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]  
699.
[   76.170035] Info fld=0x530ea 
700.
[   76.170041] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track 
701.
[   76.170058] end_request: I/O error, dev sr0, sector 1360808 
702.
[   76.170067] Buffer I/O error on device sr0, logical block 340202 
703.
[   76.374034] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE 
704.
[   76.374046] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]  
705.
[   76.374059] Info fld=0x530ea 
706.
[   76.374065] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track 
707.
[   76.374082] end_request: I/O error, dev sr0, sector 1360808 
708.
[   76.374090] Buffer I/O error on device sr0, logical block 340202 
709.
[   77.501802] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE 
710.
[   77.501814] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]  
711.
[   77.501827] Info fld=0x530ea 
712.
[   77.501833] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track 
713.
[   77.501850] end_request: I/O error, dev sr0, sector 1360808 
714.
[   77.501859] Buffer I/O error on device sr0, logical block 340202 
715.
[   77.694684] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE 
716.
[   77.694696] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]  
717.
[   77.694709] Info fld=0x530ea 
718.
[   77.694715] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track 
719.
[   77.694732] end_request: I/O error, dev sr0, sector 1360808 
720.
[   77.694741] Buffer I/O error on device sr0, logical block 340202 
721.
[   78.965512] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE 
722.
[   78.965525] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]  
723.
[   78.965538] Info fld=0x530ea 
724.
[   78.965543] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track 
725.
[   78.965561] end_request: I/O error, dev sr0, sector 1360808 
726.
[   78.965570] Buffer I/O error on device sr0, logical block 340202 
727.
[   79.493700] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE 
728.
[   79.493712] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]  
729.
[   79.493725] Info fld=0x530e9 
730.
[   79.493731] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track 
731.
[   79.493748] end_request: I/O error, dev sr0, sector 1360804 
732.
[   79.493757] Buffer I/O error on device sr0, logical block 340201 
733.
[   79.833165] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE 
734.
[   79.833177] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]  
735.
[   79.833190] Info fld=0x530ea 
736.
[   79.833196] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track 
737.
[   79.833214] end_request: I/O error, dev sr0, sector 1360808 
738.
[   79.833223] Buffer I/O error on device sr0, logical block 340202 
739.
[   80.170724] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE 
740.
[   80.170736] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]  
741.
[   80.170749] Info fld=0x530ea 
742.
[   80.170755] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track 
743.
[   80.170772] end_request: I/O error, dev sr0, sector 1360808 
744.
[   80.170781] Buffer I/O error on device sr0, logical block 340202 
745.
[   80.710966] ISO 9660 Extensions: Microsoft Joliet Level 3 
746.
[   80.912045] ISO 9660 Extensions: RRIP_1991A 
747.
[   81.428630] aufs 2-standalone.tree-30-20090727 
748.
[   81.895795] squashfs: version 4.0 (2009/01/31) Phillip Lougher 
749.
[   95.440048] usb 1-7: new high speed USB device using ehci_hcd and address 2 
750.
[   95.587213] usb 1-7: configuration #1 chosen from 1 choice 
751.
[   95.613321] Initializing USB Mass Storage driver... 
752.
[   95.613868] scsi2 : SCSI emulation for USB Mass Storage devices 
753.
[   95.614231] usbcore: registered new interface driver usb-storage 
754.
[   95.614241] USB Mass Storage support registered. 
755.
[   95.614470] usb-storage: device found at 2 
756.
[   95.614476] usb-storage: waiting for device to settle before scanning 
757.
[  100.612357] usb-storage: device scan complete 
758.
[  100.614095] scsi 2:0:0:0: Direct-Access     USB      Flash Drive      1.12 PQ: 0 ANSI: 0 CCS 
759.
[  100.615336] sd 2:0:0:0: Attached scsi generic sg1 type 0 
760.
[  100.619167] sd 2:0:0:0: [sda] 253949 512-byte logical blocks: (130 MB/123 MiB) 
761.
[  100.622284] sd 2:0:0:0: [sda] Write Protect is off 
762.
[  100.622294] sd 2:0:0:0: [sda] Mode Sense: 37 00 00 00 
763.
[  100.622302] sd 2:0:0:0: [sda] Assuming drive cache: write through 
764.
[  100.628049] sd 2:0:0:0: [sda] Assuming drive cache: write through 
765.
[  100.628059]  sda: 
766.
[  100.641926] sd 2:0:0:0: [sda] Assuming drive cache: write through 
767.
[  100.641938] sd 2:0:0:0: [sda] Attached SCSI removable disk 
768.
[  230.197218] udev: starting version 147 
769.
[  239.450222] lib80211: common routines for IEEE802.11 drivers 
770.
[  239.450233] lib80211_crypt: registered algorithm 'NULL' 
771.
[  242.080479] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input6 
772.
[  242.106173] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input7 
773.
[  242.380770] intel_rng: FWH not detected 
774.
[  242.427362] tifm_7xx1 0000:02:0b.3: enabling device (0000 -> 0002) 
775.
[  242.427383] tifm_7xx1 0000:02:0b.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 
776.
[  242.666346] yenta_cardbus 0000:02:0b.0: CardBus bridge found [1179:0001] 
777.
[  242.666390] yenta_cardbus 0000:02:0b.0: Enabling burst memory read transactions 
778.
[  242.666402] yenta_cardbus 0000:02:0b.0: Using CSCINT to route CSC interrupts to PCI 
779.
[  242.666411] yenta_cardbus 0000:02:0b.0: Routing CardBus interrupts to PCI 
780.
[  242.666423] yenta_cardbus 0000:02:0b.0: TI: mfunc 0x01aa1b02, devctl 0x64 
781.
[  242.900793] yenta_cardbus 0000:02:0b.0: ISA IRQ mask 0x0cf8, PCI irq 21 
782.
[  242.900804] yenta_cardbus 0000:02:0b.0: Socket status: 30000006 
783.
[  242.900820] yenta_cardbus 0000:02:0b.0: pcmcia: parent PCI bridge I/O window: 0xb000 - 0xbfff 
784.
[  242.900831] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xb000-0xbfff: clean. 
785.
[  242.901471] yenta_cardbus 0000:02:0b.0: pcmcia: parent PCI bridge Memory window: 0xcdf00000 - 0xcdffffff 
786.
[  242.901482] yenta_cardbus 0000:02:0b.0: pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x47ffffff 
787.
[  243.536873] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.19-dev-acpikeys 
788.
[  243.536885] toshiba_acpi:     HCI method: \_SB_.VALZ.GHCI 
789.
[  243.538100] toshiba_acpi: Toshiba hotkeys are sent as ACPI events 
790.
[  243.538109] toshiba_acpi: ktoshkeyd will check 2 times per second 
791.
[  243.544228] toshiba_acpi: Dropped 0 keys from the queue on startup 
792.
[  243.685642] ieee80211: 802.11 data/management/control stack, git-1.1.13 
793.
[  243.685652] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com> 
794.
[  246.920563] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq 
795.
[  246.920574] ipw2200: Copyright(c) 2003-2006 Intel Corporation 
796.
[  246.920723]   alloc irq_desc for 22 on node -1 
797.
[  246.920730]   alloc kstat_irqs on node -1 
798.
[  246.920747] ipw2200 0000:02:05.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 
799.
[  246.920889] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection 
800.
[  246.921020] ipw2200 0000:02:05.0: firmware: requesting ipw2200-bss.fw 
801.
[  246.978593] Linux video capture interface: v2.00 
802.
[  246.980570] sdhci: Secure Digital Host Controller Interface driver 
803.
[  246.980580] sdhci: Copyright(c) Pierre Ossman 
804.
[  248.249701] ip_tables: (C) 2000-2006 Netfilter Core Team 
805.
[  248.809363] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. 
806.
[  248.810782] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean. 
807.
[  248.811418] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. 
808.
[  248.811986] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. 
809.
[  248.820175] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. 
810.
[  250.065987] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels) 
811.
[  250.071215] sdhci-pci 0000:02:0b.4: SDHCI controller found [104c:8034] (rev 0) 
812.
[  250.071244] sdhci-pci 0000:02:0b.4: enabling device (0000 -> 0002) 
813.
[  250.071263] sdhci-pci 0000:02:0b.4: PCI INT D -> GSI 23 (level, low) -> IRQ 23 
814.
[  250.071434] Registered led device: mmc0:: 
815.
[  250.071516] mmc0: SDHCI controller on PCI [0000:02:0b.4] using DMA 
816.
[  250.071614] Registered led device: mmc1:: 
817.
[  250.071671] mmc1: SDHCI controller on PCI [0000:02:0b.4] using DMA 
818.
[  250.071761] Registered led device: mmc2:: 
819.
[  250.071833] mmc2: SDHCI controller on PCI [0000:02:0b.4] using DMA 
820.
[  251.101248] ivtv: Start initialization, version 1.4.1 
821.
[  251.101394] ivtv0: Initializing card 0 
822.
[  251.101410] ivtv0: Unknown card: vendor/device: [4444:0016] 
823.
[  251.101419] ivtv0:               subsystem vendor/device: [1179:0001] 
824.
[  251.101427] ivtv0:               cx23416 based 
825.
[  251.101434] ivtv0: Defaulting to Hauppauge WinTV PVR-150 card 
826.
[  251.101441] ivtv0: Please mail the vendor/device and subsystem vendor/device IDs and what kind of 
827.
[  251.101449] ivtv0: card you have to the ivtv-devel mailinglist (www.ivtvdriver.org) 
828.
[  251.101457] ivtv0: Prefix your subject line with [UNKNOWN IVTV CARD]. 
829.
[  251.101556] ivtv 0000:02:09.0: enabling device (0000 -> 0002) 
830.
[  251.101575] ivtv 0000:02:09.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 
831.
[  251.146172] tveeprom 0-0050: Huh, no eeprom present (err=-6)? 
832.
[  251.146185] tveeprom 0-0050: Encountered bad packet header [00]. Corrupt or not a Hauppauge eeprom. 
833.
[  251.146194] ivtv0: Invalid EEPROM 
834.
[  252.539950] cx25840 0-0044: cx25  0-21 found @ 0x88 (ivtv i2c driver #0) 
835.
[  255.294514] Chip ID is not zero. It is not a TEA5767 
836.
[  255.294840] tuner 0-0060: chip found @ 0xc0 (ivtv i2c driver #0) 
837.
[  256.350857] wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0) 
838.
[  256.371859] wm8775 0-001b: I2C: cannot write 000 to register R23 
839.
[  256.375594] wm8775 0-001b: I2C: cannot write 000 to register R7 
840.
[  256.384713] wm8775 0-001b: I2C: cannot write 021 to register R11 
841.
[  256.392154] wm8775 0-001b: I2C: cannot write 102 to register R12 
842.
[  256.395405] wm8775 0-001b: I2C: cannot write 000 to register R13 
843.
[  256.401650] wm8775 0-001b: I2C: cannot write 1d4 to register R14 
844.
[  256.406074] wm8775 0-001b: I2C: cannot write 1d4 to register R15 
845.
[  256.409748] wm8775 0-001b: I2C: cannot write 1bf to register R16 
846.
[  256.413414] wm8775 0-001b: I2C: cannot write 185 to register R17 
847.
[  256.417096] wm8775 0-001b: I2C: cannot write 0a2 to register R18 
848.
[  256.420665] wm8775 0-001b: I2C: cannot write 005 to register R19 
849.
[  256.423975] wm8775 0-001b: I2C: cannot write 07a to register R20 
850.
[  256.428028] wm8775 0-001b: I2C: cannot write 102 to register R21 
851.
[  256.428053] IRQ 19/ivtv0: IRQF_DISABLED is not guaranteed on shared IRQs 
852.
[  256.428810] ivtv0: Registered device video0 for encoder MPG (4096 kB) 
853.
[  256.428886] ivtv0: Registered device video32 for encoder YUV (2048 kB) 
854.
[  256.428963] ivtv0: Registered device vbi0 for encoder VBI (1024 kB) 
855.
[  256.429032] ivtv0: Registered device video24 for encoder PCM (320 kB) 
856.
[  256.429100] ivtv0: Registered device radio0 for encoder radio 
857.
[  256.429108] ivtv0: Initialized card: Hauppauge WinTV PVR-150 
858.
[  256.429162] ivtv: End initialization 
859.
[  257.846395] ADDRCONF(NETDEV_UP): eth0: link is not ready 
860.
[  258.656030] ivtv 0000:02:09.0: firmware: requesting v4l-cx2341x-enc.fw 
861.
[  259.232273] Intel ICH 0000:00:1e.2: power state changed by ACPI to D0 
862.
[  259.232293] Intel ICH 0000:00:1e.2: enabling device (0000 -> 0003) 
863.
[  259.232311]   alloc irq_desc for 17 on node -1 
864.
[  259.232317]   alloc kstat_irqs on node -1 
865.
[  259.232336] Intel ICH 0000:00:1e.2: PCI INT A -> GSI 17 (level, low) -> IRQ 17 
866.
[  259.232434] Intel ICH 0000:00:1e.2: setting latency timer to 64 
867.
[  259.833127] ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes) 
868.
[  260.036177] ivtv0: Encoder revision: 0x02060039 
869.
[  260.064684] cx25840 0-0044: firmware: requesting v4l-cx23885-avcore-01.fw 
870.
[  260.156041] intel8x0_measure_ac97_clock: measured 55226 usecs (2661 samples) 
871.
[  260.156052] intel8x0: clocking to 48000 
872.
[  260.863418] cx25840 0-0044: firmware load i2c failure 
873.
[  261.002888] wm8775 0-001b: I2C: cannot write 0c0 to register R21 
874.
[  261.007182] wm8775 0-001b: I2C: cannot write 1d4 to register R14 
875.
[  261.011544] wm8775 0-001b: I2C: cannot write 1d4 to register R15 
876.
[  261.015225] wm8775 0-001b: I2C: cannot write 102 to register R21 
877.
[  261.063847] tuner 0-0060: tuner type not set 
878.
[  261.067485] wm8775 0-001b: I2C: cannot write 0c0 to register R21 
879.
[  261.071157] wm8775 0-001b: I2C: cannot write 1d4 to register R14 
880.
[  261.075844] wm8775 0-001b: I2C: cannot write 1d4 to register R15 
881.
[  261.079511] wm8775 0-001b: I2C: cannot write 102 to register R21 
882.
[  261.119836] tuner 0-0060: tuner type not set 
883.
[  261.127074] tuner 0-0060: tuner type not set 
884.
[  261.141119] wm8775 0-001b: I2C: cannot write 0c0 to register R21 
885.
[  261.145101] wm8775 0-001b: I2C: cannot write 1d4 to register R14 
886.
[  261.148760] wm8775 0-001b: I2C: cannot write 1d4 to register R15 
887.
[  261.151996] wm8775 0-001b: I2C: cannot write 108 to register R21 
888.
[  261.307378] tuner 0-0060: tuner type not set 
889.
[  261.311140] wm8775 0-001b: I2C: cannot write 0c0 to register R21 
890.
[  261.314813] wm8775 0-001b: I2C: cannot write 1d4 to register R14 
891.
[  261.319202] wm8775 0-001b: I2C: cannot write 1d4 to register R15 
892.
[  261.322882] wm8775 0-001b: I2C: cannot write 102 to register R21 
893.
[  267.628964] tuner 0-0060: tuner type not set 
894.
[  267.696492] wm8775 0-001b: I2C: cannot write 0c0 to register R21 
895.
[  267.719060] wm8775 0-001b: I2C: cannot write 1d4 to register R14 
896.
[  267.752461] wm8775 0-001b: I2C: cannot write 1d4 to register R15 
897.
[  267.765932] wm8775 0-001b: I2C: cannot write 108 to register R21 
898.
[  268.084023] eth1: no IPv6 routers present 
899.
[  268.578100] tuner 0-0060: tuner type not set 
900.
[  268.581836] wm8775 0-001b: I2C: cannot write 0c0 to register R21 
901.
[  268.585567] wm8775 0-001b: I2C: cannot write 1d4 to register R14 
902.
[  268.589289] wm8775 0-001b: I2C: cannot write 1d4 to register R15 
903.
[  268.594916] wm8775 0-001b: I2C: cannot write 102 to register R21 
904.
[  270.245632] lp: driver loaded but no devices found 
905.
[  271.854074] ppdev: user-space parallel port driver
Ich bin zwar kein Linux-Noob, jedoch ist mein Wissen begrenzt. Warscheinlich habe ich die hälfte aller interessanten Fehlermeldungen übersehen, jedoch ist mir folgendes aufgefallen:

01.
[   10.964032] ata1: link is slow to respond, please be patient (ready=0) 
02.
[   15.780032] ata1: SRST failed (errno=-16) 
03.
[   20.976031] ata1: link is slow to respond, please be patient (ready=0) 
04.
[   25.792032] ata1: SRST failed (errno=-16) 
05.
[   30.988031] ata1: link is slow to respond, please be patient (ready=0) 
06.
[   60.836038] ata1: SRST failed (errno=-16) 
07.
[   65.864032] ata1: SRST failed (errno=-16) 
08.
[   65.864039] ata1: reset failed, giving up
Ich hoffe mir kann jemand helfen.

Vielen Dank schonmal für Eure Bemühungen
Mitglied: SamvanRatt
09.05.2010 um 22:08 Uhr
Hi
ich habe ein ganz ähnliches NB (FSC E8020D) mit dem selben Chipsatz unter CentOS4.6, bzw 5.4. Als was läuft dein SATA? IDE oder kompatibel? Ich habe die Wahl zwischen AHCI, Kompatibel und SATA native. Alle drei werden sehr unterscheidlich unterstützt. Am Besten geht derzeit AHCI (seit Kernel 2.6.18+). Der Kompatible Modus ist zwar super kompatibel zu Winxy aber er emuliert halt nur was Linxu nicht gerne hat. Stell doch mal um (da du scheinbar auch den ICH6 drinnen hast wie ich), dann geht zwar dein Win nicht mehr so einfach (habe hier im Board aber einen Patch eingestellt um dies vorab zu "Verabreichen"; such nach AHCI und sam).
So wie ich dein dmesg interpretiere hast du den Kompa Modus aktiv;
Gruß
Sam
Bitte warten ..
Mitglied: LayerAcht
09.05.2010 um 22:15 Uhr
Es ist ja keine SATA Festplatte. Es ist eine IDE.
Steht aber auch ganz oben.

Das BIOS ist übrigens ein wahres disaster. Also die Uhrzeit kann man mehr oder weniger problemlos einstellen. Das war es aber auch schon.
Bitte warten ..
Mitglied: mrtux
09.05.2010 um 22:42 Uhr
Hi !

Zitat von LayerAcht:
Das BIOS ist übrigens ein wahres disaster. Also die Uhrzeit kann man mehr oder weniger problemlos einstellen. Das war es aber
auch schon.

Hast Du mal geschaut ob es ein Update dafür gibt? Hast Du mal die üblichen Vorgehensweisen (über Bootparameter) z.B ohne Apm und Acpi versucht?
Guggst Du hier, vielleicht hilft das weiter, zumindest hat er es ja (mit einem älteren Linux) geschafft...

mrtux
Bitte warten ..
Mitglied: LayerAcht
09.05.2010 um 22:55 Uhr
Danke für die Info, doch leider ist mein BIOS schon das Aktuellste.
Deinen Link kenn ich auch schon. War so ziemlich das erste was ich gefunden habe, als ich nach meinem Notebook in Verbindung mit Linux gefunden habe.
Jedoch denke ich, dass das Problem möglicherweise daran liegt, dass ich ja ein anderes Mainboard drin habe, als die meisten Qosmio G10-Benutzer. Toshiba hat ein neues Mainboard für dieses Notebook entwickelt.
Naja, genau dieses hab ich drin.
Die Änderungen liegen an der Grafikkarte und dem Chipsatz. Desshalb dachte ich, dass es Probleme mit dem Chipsatz geben könnte.

Mal sehen was mir die Bootparameter bringen.
*Daumen drück*
Bitte warten ..
Mitglied: SamvanRatt
10.05.2010 um 07:06 Uhr
Hi
SATA und PATA sind beide IDE HD Ausführungen, aber ich verstehe was du meinst. Die Qosmio (G10/G20/G30) sind sehr eigene Modelle (wir haben hier auch einige Modelle mit XP schon viel Spaß gehabt, obwohl nur ein normaler ICH verwendet wird, sind die XP Treiber von Intel diese Reihe gesperrt laufen aber damit. Wie du den Kernel dazu bringst den PATA Modus als Intel zu sehen....
Ich schau mal und melde mich
Gruß
Sam
Bitte warten ..
Mitglied: LayerAcht
10.05.2010 um 14:57 Uhr
Ich hab die Lösung.
Es ist eigentlich ganz einfach zu lösen, nur verstehe ich nicht warum das so ist

Das Notebook habe ich von jemanden bekommen da es defekt war. Ich habe bei E-Bay ein neues Mainboard gekauft und es eingebaut.
Nun hat dieses Notebook 2 Festplattenanschlüsse. Ich hatte immer nur einen verwendet, da ich dachte der 2. geht nicht. Immer als ich die 2. Festplatte angeschlossen hatte, wollte dieses Teil nicht mehr hochfahren.
Also hab ich nur eine angeschlossen und alles ging prima. Ich habe sogar vergessen, dass ich eigentlich 2 Festplattenanschlüsse hatte...
Naja nun komm ich mal zur Sache:
An den tollen IDE Festplatten hat man ja noch diese wunderbaren Jumper...

Eine war auf Device 0 und eine auf Device 1.
Ich wollte mal probieren was passiert, wenn ich beide auf Cable-Selected stelle. Das Problem war, dass ich nur einen Jumper hatte. Also hab ich beide mal auf Device 0 gestellt (also keinen Jumper setzten).
Und schwups ging das Teil mit 2 Festplatten...
Linux installiert...
Ging.

Wenn mir jetzt noch einer erklären kann warum ich beide auf Device 0 stellen musste, dann möge er jetzt sprechen oder für immer schweigen :D


$EDIT:
Wenn ich beide Festplatten auf CS stelle, dann fährt der Computer nicht mehr hoch. Seltsam, seltsam

$EDIT2:
Ich habe jetzt mal Ubuntu 10.04 installiert.
Jetzt geht Windows XP nicht mehr. Mein Laptop startet einfach neu. Bei Ubuntu 9.10 ging alles wunderbar.
Bitte warten ..
Mitglied: SamvanRatt
10.05.2010 um 17:12 Uhr
Hi
wenn beide HDs an unterschiedlichen Adaptern hängen muß es immer Dev0 sein (vermutlich wird dein System zwei getrennte Ports haben); CS muß vom Controller unterstützt werden um zu laufen; das Original Toshi BIOS ist sehr spärlich und hat sich in 15 JAhren nicht wirklich verändert. Wenn man normale Consumer BIOSe kennt ist es sehr leer...
Für dein XP: formatiere eine Disk unter windows, kopiere die ntldr, NTDETECT.COM, boot.in auf die Disk dann kannst du probieren ob es so funktioniert (dann ist wohl nur dein NT Loader beschädigt (=GRUB) oder die boot.ini sucht die falsche Partition ab; Mit Floppy sieht man auch schnell an welchem Dateistadium er den Reset auslöst (zuerst startet der ntldr, dieser holt die boot.ini und dann nach Auswahl kommt die NTDETECT.COM. Am fragilsten ist der ntldr, da er nur mit wenigen Situationen auskommt. Hast du das auch jetzt mit nur einer Disk am laufen? Ansonsten hat sich evtl dein HD Schema verändert.
Gruß
Sam
Bitte warten ..
Mitglied: LayerAcht
10.05.2010 um 17:37 Uhr
Danke für die Information mit Dev0. Nur ist das ziemlich komisch, da man beim alten Board eine Festplatte mit Device 0 und eine mit Device 1 laufen lassen musste.
Die lassen sich echt was einfallen, damit man das Board bei denen einbauen lässt.

Ich habe jetzt 2 HDD's am laufen.
fdisk -l sagt mir folgendes:

01.
Platte /dev/sda: 60.0 GByte, 60011642880 Byte 
02.
255 Köpfe, 63 Sektoren/Spur, 7296 Zylinder 
03.
Einheiten = Zylinder von 16065 × 512 = 8225280 Bytes 
04.
Sector size (logical/physical): 512 bytes / 512 bytes 
05.
I/O size (minimum/optimal): 512 bytes / 512 bytes 
06.
Disk identifier: 0xceacb41c 
07.
 
08.
   Gerät  boot.     Anfang        Ende     Blöcke   Id  System 
09.
/dev/sda1   *           1        7295    58597056    7  HPFS/NTFS 
10.
 
11.
Platte /dev/sdb: 60.0 GByte, 60011642880 Byte 
12.
255 Köpfe, 63 Sektoren/Spur, 7296 Zylinder 
13.
Einheiten = Zylinder von 16065 × 512 = 8225280 Bytes 
14.
Sector size (logical/physical): 512 bytes / 512 bytes 
15.
I/O size (minimum/optimal): 512 bytes / 512 bytes 
16.
Disk identifier: 0x000e8426 
17.
 
18.
   Gerät  boot.     Anfang        Ende     Blöcke   Id  System 
19.
/dev/sdb1               1        6993    56165376   83  Linux 
20.
/dev/sdb2            6993        7296     2437121    5  Erweiterte 
21.
/dev/sdb5            6993        7296     2437120   82  Linux Swap / Solaris
Wenn ich jetzt also die Windows Platte mit einer anderen tausche ist der bootloader doch auch weg.
Oder hab ich was falsch verstanden?
Bitte warten ..
Mitglied: SamvanRatt
10.05.2010 um 21:56 Uhr
Hi
da sdb deine Ubuntu HD ist sieht eigentlich alles gut aus; kann aber sein das Grub die Part. deaktiviert hat (boot attrib ist aber richtig gesetzt)?! Mit der Bootdisk geht das einfach heraus zu finden; sofern du keine hast (ebay Kauf) habe ich addHoc nur eine der zahlreichen BootCDs mit einem NTloader Profil auf Lager, bzw diese obige Disk als Image abzuspeichern und auf CD zu brennen als Floppy Emu.
Gruß
Sam
Bitte warten ..
Mitglied: LayerAcht
11.05.2010 um 14:13 Uhr
Ja, die boot attribute waren okay.
Aber ich habe es jetzt hinbekommen.
Ich habe mit der Windows-Reperaturkonsole den Windows Bootloader wiederhergestellt und festgestellt, dass Windows gar nicht mehr geht.
Die Fehlersuche dauerte mir zu lange, also habe ich meine Daten mit dem guten alten Linux gerettet, meine Windows unattended CD gezogen, mich zurückgelehnt und Windows neuinstalliert.
Danach habe ich mit einer Ubuntu CD grub wiederhergestellt...
Und siehe da, es geht.

GELÖST.

Danke an alle!
Ich mag diese Seite wirklich sehr.
Bitte warten ..
Neuester Wissensbeitrag
Ähnliche Inhalte
Windows Installation
Windows erkennt Festplatte falsche Kapazität - was da los?! (4)

Frage von sleeplessnight zum Thema Windows Installation ...

CPU, RAM, Mainboards
gelöst 4GB installiert, BIOS erkennt 4GB, Windows meldet 8GB !? (10)

Frage von MC-Tech zum Thema CPU, RAM, Mainboards ...

Ubuntu
gelöst Linux-Host in Windows Domain (1)

Frage von Looser27 zum Thema Ubuntu ...

Heiß diskutierte Inhalte
Windows Userverwaltung
Ausgeschiedene Mitarbeiter im Unternehmen - was tun mit den AD Konten? (33)

Frage von patz223 zum Thema Windows Userverwaltung ...

LAN, WAN, Wireless
FritzBox, zwei Server, verschiedene Netze (21)

Frage von DavidGl zum Thema LAN, WAN, Wireless ...

Viren und Trojaner
Aufgepasst: Neue Ransomware Goldeneye verbreitet sich rasant (20)

Link von Penny.Cilin zum Thema Viren und Trojaner ...